Sharpening help.
-
Then I think I will go for the freehand option, and it is also a good skill to know [emoji106] Thanks for your help guys [emoji2]
Sent fra min FRD-L09 via Tapatalk
-
Freehand sharpening takes a lot of skill and muscle memory and can look (from an aesthetic pov) a bit iffy too, especially if you're not that used to doing it - I've had a pocket knife since I was five and while I can sharpen freehand, I wouldn't say the results are consistent.
I'd invest in a Lansky guide system - just the basic one will do, but if you don't abuse knives too much and just need to touch them up from time to time get a mini Lansky Crux/Crock Stick, about a $8 at most - they're excellent for maintaining factory edges.
Edit: Also Lansky guide systems can do small pocket knife blades easily enough, they have a little notch for them, that's what I use.
-
@Fuzzbucket said:
Freehand sharpening takes a lot of skill and muscle memory and can look (from an aesthetic pov) a bit iffy too, especially if you're not that used to doing it - I've had a pocket knife since I was five and while I can sharpen freehand, I wouldn't say the results are consistent.
I'd invest in a Lansky guide system - just the basic one will do, but if you don't abuse knives too much and just need to touch them up from time to time get a mini Lansky Crux/Crock Stick, about a $8 at most - they're excellent for maintaining factory edges.
Edit: Also Lansky guide systems can do small pocket knife blades easily enough, they have a little notch for them, that's what I use.
Thanks for your input, guess I'll just wait and see what I end up with when I go to the store to check out the options there [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
Freehand sharpening takes a lot of skill and muscle memory and can look (from an aesthetic pov) a bit iffy too, especially if you're not that used to doing it - I've had a pocket knife since I was five and while I can sharpen freehand, I wouldn't say the results are consistent.
I'd invest in a Lansky guide system - just the basic one will do, but if you don't abuse knives too much and just need to touch them up from time to time get a mini Lansky Crux/Crock Stick, about a $8 at most - they're excellent for maintaining factory edges.
Edit: Also Lansky guide systems can do small pocket knife blades easily enough, they have a little notch for them, that's what I use.
Thanks for your input, guess I'll just wait and see what I end up with when I go to the store to check out the options there [emoji106]
Sent fra min FRD-L09 via Tapatalk
If you're going to the shops, avoid any of those plastic diamond crock stick thingys, especially the gerber one - they're horrible!!! :ahhh
-
Freehand sharpening takes a lot of skill and muscle memory and can look (from an aesthetic pov) a bit iffy too, especially if you're not that used to doing it - I've had a pocket knife since I was five and while I can sharpen freehand, I wouldn't say the results are consistent.
I'd invest in a Lansky guide system - just the basic one will do, but if you don't abuse knives too much and just need to touch them up from time to time get a mini Lansky Crux/Crock Stick, about a $8 at most - they're excellent for maintaining factory edges.
Edit: Also Lansky guide systems can do small pocket knife blades easily enough, they have a little notch for them, that's what I use.
Thanks for your input, guess I'll just wait and see what I end up with when I go to the store to check out the options there [emoji106]
Sent fra min FRD-L09 via Tapatalk
If you're going to the shops, avoid any of those plastic diamond crock stick thingys, especially the gerber one - they're horrible!!! :ahhh
Thanks [emoji106] I have a sports/outdoors store I'm going to that have both the tri-stone and the guided system from Lansky, so will compare them and see what I end up with [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
Check out the Lansky Turnbox it works really well to maintain a sharp edge. That and a benchstone or small diamond pocket stone is all you really need

-
I've sharpened my small traditional knife and a small crkt pilar on a lansky guided. Worked great
-
the blade medic is good for touching up the edge after some moderate use, and good to have in a backpack, but if you need some deep work I don't think its the best option.
-
I'm a fan of the guided system by Lansky. Lots of options on abrasives as well. I also have the Turn box which is nice for touch ups but I use my Spyderco sharpmaker more. Stropping is what I always go to first when my edges begin to loose their edge. If after a strop session I find I need more then onto the ceramics then back to stropping. If damage has occurred then I'll break out the Lansky. I run a few compounds on my leather strops. Nothing high end and nothing I cannot readily get from a home improvement store. I know there are really nice compounds but so far I've managed to get by rather well.
Many blades would do fine with some stropping to bring the edge back up vs an all out sharpening session.
-
Thanks for your input and tips guys! Still can't decide but I'm sure I will end up with something good ☺
Sent fra min FRD-L09 via Tapatalk
-
I can also recommend the blade medic for occasional touch up (I have two, on two bags) but nothing serious (the diamond is really aggressive, the ceramic is about 1000 grit and leaves a good polish but has small area/surface, I don't use the pull-throughs, the BladeMedic is heavy)
The Turn Box is essentially a cheaper and simpler Sharpmaker that seems to produce good results for most people, I can't speak for myself because I only have the Spyderco SM which I use very often (my main sharpening tool) ;)

On the go and when I want to carry a small but good sharpening system and not handle the weight of the BladeMedic I use small hones and crock-sticks sold by Lansky, this one serves for small, big, SE and PE knives, and the groove is for hooks, package openers or really small blades :ahhh

there is aversion for Cold Steel's serrations also sold by Lansky but works for other things too. Both models are cheap (5-10$) and versatile


these small ceramic and diamond plates are also handy to have and weigh little, they fit well in altoids tins, small sheaths or tiny pockets in clothes and bags

let us know what you finally get!!

-
@ThePeacent said:
I can also recommend the blade medic for occasional touch up (I have two, on two bags) but nothing serious (the diamond is really aggressive, the ceramic is about 1000 grit and leaves a good polish but has small area/surface, I don't use the pull-throughs, the BladeMedic is heavy)The Turn Box is essentially a cheaper and simpler Sharpmaker that seems to produce good results for most people, I can't speak for myself because I only have the Spyderco SM which I use very often (my main sharpening tool) ;)

On the go and when I want to carry a small but good sharpening system and not handle the weight of the BladeMedic I use small hones and crock-sticks sold by Lansky, this one serves for small, big, SE and PE knives, and the groove is for hooks, package openers or really small blades :ahhh

there is aversion for Cold Steel's serrations also sold by Lansky but works for other things too. Both models are cheap (5-10$) and versatile


these small ceramic and diamond plates are also handy to have and weigh little, they fit well in altoids tins, small sheaths or tiny pockets in clothes and bags

let us know what you finally get!!

Some good options there [emoji106] I'll see what is available and post it here when I get whatever I decide on [emoji16]
Sent fra min FRD-L09 via Tapatalk
-
Pssssst
Online you can find some stores that sell a set like Lansky's.
They're cheap, they work, and they give you an idea what a Lansky is all about before buying it.
Ofcourse, if a Lansky system is affordable, just grab that one... if that catched your interest.
-
@Mechanickal said:
PssssstOnline you can find some stores that sell a set like Lansky's.
They're cheap, they work, and they give you an idea what a Lansky is all about before buying it.
Ofcourse, if a Lansky system is affordable, just grab that one... if that catched your interest.
Cool! But the Lansky system is quite affordable compared to other options here and I can just go buy it and not wait forever to get it [emoji16]
Sent fra min FRD-L09 via Tapatalk
-
I just spent 1.5x the price of the original kit on the diamond stones........my advice is get those and only those......if possible.
........depending on the steel you're trying to sharpen of course.....
-
Pssssst
Online you can find some stores that sell a set like Lansky's.
They're cheap, they work, and they give you an idea what a Lansky is all about before buying it.
Ofcourse, if a Lansky system is affordable, just grab that one... if that catched your interest.
Cool! But the Lansky system is quite affordable compared to other options here and I can just go buy it and not wait forever to get it [emoji16]
Sent fra min FRD-L09 via Tapatalk
In that case...
I'd say: get one!
You can even use the stones freehand if you prefer.
My copy works great so I can only imagine the results with a Lansky...
-
Pssssst
Online you can find some stores that sell a set like Lansky's.
They're cheap, they work, and they give you an idea what a Lansky is all about before buying it.
Ofcourse, if a Lansky system is affordable, just grab that one... if that catched your interest.
Cool! But the Lansky system is quite affordable compared to other options here and I can just go buy it and not wait forever to get it [emoji16]
Sent fra min FRD-L09 via Tapatalk
In that case...
I'd say: get one!
You can even use the stones freehand if you prefer.
My copy works great so I can only imagine the results with a Lansky...
It does seem like a great way to get good results and not mess up a lot in the process [emoji106] Looking forward to trying it [emoji16]
Sent fra min FRD-L09 via Tapatalk
-
@Gerhard Gerber said:
I just spent 1.5x the price of the original kit on the diamond stones........my advice is get those and only those......if possible.........depending on the steel you're trying to sharpen of course.....
The diamond stone system or just the diamond stones?
Sent fra min FRD-L09 via Tapatalk
-
@RF52 said:
The diamond stone system or just the diamond stones?Sent fra min FRD-L09 via Tapatalk
Sorry, I was referring to the Lanksy kit. Don't know if it's possible, but I would buy the basic kit with diamond stones. I think mostly people won't need the extra coarse, so 3 diamond stones and the ceramic should be wonderful for most people.
Badly cut myself while sharpening a blade I forged from a bearing casing, partly because it was taking forever. With the diamond stones it went quickly.
-
@Gerhard Gerber said:
The diamond stone system or just the diamond stones?
Sent fra min FRD-L09 via Tapatalk
Sorry, I was referring to the Lanksy kit. Don't know if it's possible, but I would buy the basic kit with diamond stones. I think mostly people won't need the extra coarse, so 3 diamond stones and the ceramic should be wonderful for most people.
Badly cut myself while sharpening a blade I forged from a bearing casing, partly because it was taking forever. With the diamond stones it went quickly.
I will see what they have [emoji106] Thanks!
Sent fra min FRD-L09 via Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login