Electrician's Multitool Mod
-
Ran into a bit of a S.N.A.F.U. The handles/ frame of the ES4 is longer than the handles of the wire strippers I’m replacing.

-
Here is the factory strippers.

-
Had to shorten the ES4 handle and drill a hole.

-
Then cut down the springs. Had to thin them out after this pic to get the spring action to work.

-
Spring action works with just one. I am planning on just using the one and possibly rivitting the original handle to the other side.

-
I used my Dremel tool and cut out just a little more of the track for the strippers to slide a little further back into the body.

-
I cut the plastic piece that the spring attaches to to eject the wire strippers out of the body and inserted it into the frame of the ES4.

-
Here is what it looks like with the frame on top.

-
Here is how they spring out of the body. Well... it wouldn’t load the video after compressing.

-
Here is the original flat head/ bottle opener.

-
I’m replacing it with the large Leatherman flathead from a Surge. I traced around the original screwdriver so it would lock in place when deployed.

-
I used some tubing cutters and cut a piece of steel pin tubing from some knife making materials I have. I inserted it into the pivot hole in the Large flat head to decrease the size of the pivot hole.

-
More grinding

-
Looks like I got the last 2 pics out of order... you get the idea!


-
Flat head is a little too long...

-
You guest it! More grinding! :D

-
That’s better!

-
Time for the blade! I found thes Gerber Box blade at Walmart for about $6. I already have another mod in mind for another one.

-
Here’s a pic of the other side.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
