Fällkniven DC4 "hack"
-
I have seen "hacks" online about taking off the diamond plate on your new DC4, why you would want to do that I don't know. However, I just more or less wore out my first DC4 which I bought around 2008 or something along those lines and have used heavily, and finally the diamond side didn't cut well enough for my standards, so it lasted a long time (I have a backup that is new that will replace it). However I thought about the "hack" and I realized that I could use the worn out diamond plate after removing it to lap one of the ceramic sides and it worked, so now witout the diamond plate there is one fine side and one side that is a little bit finer, nothing compared to the white side of the CC4, but still, finer, and fine enough for me to feel like it's a two sided stone. Don't know if anybody cares, but I wanted to share my discovery :)
-
@aikon2014 said:
I have seen "hacks" online about taking off the diamond plate on your new DC4, why you would want to do that I don't know. However, I just more or less wore out my first DC4 which I bought around 2008 or something along those lines and have used heavily, and finally the diamond side didn't cut well enough for my standards, so it lasted a long time (I have a backup that is new that will replace it). However I thought about the "hack" and I realized that I could use the worn out diamond plate after removing it to lap one of the ceramic sides and it worked, so now witout the diamond plate there is one fine side and one side that is a little bit finer, nothing compared to the white side of the CC4, but still, finer, and fine enough for me to feel like it's a two sided stone. Don't know if anybody cares, but I wanted to share my discovery :)Cool idea! I gifted my DC4 to my brother a little while back. They are great tools. I need to get another one....
-
Great idea to make it last even longer that way

-
Will bear that in mind once mine has worn down some more.How do you go about removing the diamond plate?
-
@magentus said:
Will bear that in mind once mine has worn down some more.How do you go about removing the diamond plate?
I took a knife (don't know the name in english, will post a pic at the bottom of the reply) and put it "between" the diamond and ceramic and carefully whacked it with the handle of a screwdriver and it poppet of. However my worn out one was when they used epoxy or something along those lines as glue, so it literally popped off. Never ones have kind of a foam glue instead and what I have heard you can take a similar knife and cut around and pop it off, the foam will be easy to removed with acetone. The epoxy was hard to remove, scraped most of it off and the rest was removed with some heat, more scraping and the last was removed with the lapping of the stone.
-
Thanks Chaps

-
Will bear that in mind once mine has worn down some more.How do you go about removing the diamond plate?
I took a knife (don't know the name in english, will post a pic at the bottom of the reply) and put it "between" the diamond and ceramic and carefully whacked it with the handle of a screwdriver and it poppet of.
chisel?

-
Will bear that in mind once mine has worn down some more.How do you go about removing the diamond plate?
I took a knife (don't know the name in english, will post a pic at the bottom of the reply) and put it "between" the diamond and ceramic and carefully whacked it with the handle of a screwdriver and it poppet of. However my worn out one was when they used epoxy or something along those lines as glue, so it literally popped off. Never ones have kind of a foam glue instead and what I have heard you can take a similar knife and cut around and pop it off, the foam will be easy to removed with acetone. The epoxy was hard to remove, scraped most of it off and the rest was removed with some heat, more scraping and the last was removed with the lapping of the stone.

-
Will bear that in mind once mine has worn down some more.How do you go about removing the diamond plate?
I took a knife (don't know the name in english, will post a pic at the bottom of the reply) and put it "between" the diamond and ceramic and carefully whacked it with the handle of a screwdriver and it poppet of.
chisel?

Forgot the picture, but added it now! :D
-
Will bear that in mind once mine has worn down some more.How do you go about removing the diamond plate?
I took a knife (don't know the name in english, will post a pic at the bottom of the reply) and put it "between" the diamond and ceramic and carefully whacked it with the handle of a screwdriver and it poppet of.
chisel?

Forgot the picture, but added it now! :D
Box cutter / Utility knife then

-
Another addition to the tip, 1. don't lap the ceramics too much, it will basically make it cut so slow it's inpractical. 2. You could do it the other way as well, use something super coarse to lap it with and the surface will get rougher.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login