Compact issue
-
@Syph007 said:
Combo tools can be a bit annoying. They kind of lean towards the outer scale and put pressure it, in a fudge to try to not scratch the main blade. This gives them less snap then reg tools. You can put something in the sak like a soft prying type tool to try to push the liner out a bit, that sometimes works. Other times Ive solved it by opening the tool full and wiggling with finger pressure back and forth really hard along the axis of the pivot to try to give it a bit better free play.Compounding the issue, is that its a thin tool that can actually bend easy.
I was hoping you'd chime in here with some answers, and that makes perfect sense

The action was already bad when I got the knife, but when I replaced the scales I may have bent the liners inward a bit trying to snap them on.I tried both of those suggestions and got just a little improvement. Still not acceptable, but enough to understand what's going on here. Thanks!
And thanks guys for all the input

-
Same thing happen on my alox bantam, mind you it worked ok for 6 months and then it started to acting,
i was barely managed to close combo tool from half stop...gritty action...the knife was nowhere near sand or debris of any kind not to mention since it was my edc knife
it was washed regularly...i tried oiling , wd40 baths overnight, opening tool in hot water...nothing helped so i get rid of it...no more combo tools for me...ever...
Just my experience... -
I have two Compacts, three Bantams, a Bartender, a Waiter, two custom Alox Voyageur-Alikes, and three Scientists, all with the Combo Tool and none of them exhibit this behavior. The newest of these knives are the Compacts, and they're both about 2-3 years old. I would describe their snap as being slightly less energetic than on the main blades of those respective knives, but still perfectly acceptable.
I'd send it back until Victorinox gets it right. Sorry for your bad luck. :(
Myron
-
@Randy Marsh said:
Same thing happen on my alox bantam, mind you it worked ok for 6 months and then it started to acting,
i was barely managed to close combo tool from half stop...gritty action...the knife was nowhere near sand or debris of any kind not to mention since it was my edc knife
it was washed regularly...i tried oiling , wd40 baths overnight, opening tool in hot water...nothing helped so i get rid of it...no more combo tools for me...ever...
Just my experience...Your description fits mine exactly. I also will be avoiding patterns with the combo tool from now on.
I've owned quite a few SAKs over the years and this is the first issue I've had with any of them. Until now I've never had a functional problem or even a cosmetic one for that matter.
-
You guys are breaking my heart! When I came to this forum I was 100% sure the Compact was THE perfect SAK for me.... and though I have encountered a few bent combo tools in my collecting days, I have never personally had any issues with my Compacts, Waiters, Trail Guides, Bantams... But then I read threads like this and start thinking about how the Combo tool is out-performed by the standard openers and my whole Swiss Army existence is brought under question.... So I think there has been a sea change in my thinking... and the Climber has won favor as THE perfect SAK for me.... for a minute I thought it was the Climber Small but my love of the hook, ink pen, and lengthier tools has settled the issue.... for now...
Funny thing is, the Climber is like the cheapest SAK out there... I see them going for less than even Spartans and Tinkers... which is kinda crazy, and good for the wallet.
Anywho, I hope the parts from your Compact find peace and happiness in their new home(s).

-
When you say "force the tool closed," do you mean you have to push it all the way from the half stop to the closed position?
From half stop it will pull slightly, then I have to manually push it the rest of the way.
Sounds like the middle peenings are too tight or that layer is peened together without even distribution of compression. Could be that the machine in the factory had a bad day, setting wise. I would try, if you're keeping it, to try to move the layers a bit by gentle force with a flat screwdriver wrapped in a cloth you avoid markings.Just jiggle a bit. Check and oil and try a bit again if not helped.
Napkin math advice though, I'm no expert
~ if you're not good, be creative ~
-
Just switch in a normal bottle opener instead[emoji108][emoji7]
~ if you're not good, be creative ~
-
My dream SAK still has a combo tool...
-
@stoneshank said:
Just switch in a normal bottle opener instead[emoji108][emoji7]Cadet is in the pocket

-
@El Corkscrew said:
You guys are breaking my heart! When I came to this forum I was 100% sure the Compact was THE perfect SAK for me.... and though I have encountered a few bent combo tools in my collecting days, I have never personally had any issues with my Compacts, Waiters, Trail Guides, Bantams... But then I read threads like this and start thinking about how the Combo tool is out-performed by the standard openers and my whole Swiss Army existence is brought under question.... So I think there has been a sea change in my thinking... and the Climber has won favor as THE perfect SAK for me.... for a minute I thought it was the Climber Small but my love of the hook, ink pen, and lengthier tools has settled the issue.... for now...Funny thing is, the Climber is like the cheapest SAK out there... I see them going for less than even Spartans and Tinkers... which is kinda crazy, and good for the wallet.
Anywho, I hope the parts from your Compact find peace and happiness in their new home(s).

This one is coming apart and will be reincarnated as a Climber

-
@Mechanickal said:
My dream SAK still has a combo tool...I thought that's what I was getting with the Compact. I still think the combo tool is a great alternative to the opener layer, but the execution on my two examples has been a failure.
Still, when this one comes apart its getting new life and hopefully I can get it in working order. -
@Mechanickal said:
My dream SAK still has a combo tool...My nightmare SAK has a combo tool. :ahhh
-
My dream SAK still has a combo tool...
My nightmare SAK has a combo tool. :ahhh
Large blade + combo tool
Scissors
Wood saw
Metal saw
Haven't got the parts yet...
And never did a mod... -
Blade/combo tool/corkscrew
woodsaw
fish scaler
:ahhh -
@El Corkscrew said:
You guys are breaking my heart! When I came to this forum I was 100% sure the Compact was THE perfect SAK for me.... and though I have encountered a few bent combo tools in my collecting days, I have never personally had any issues with my Compacts, Waiters, Trail Guides, Bantams... But then I read threads like this and start thinking about how the Combo tool is out-performed by the standard openers and my whole Swiss Army existence is brought under question.... So I think there has been a sea change in my thinking... and the Climber has won favor as THE perfect SAK for me.... for a minute I thought it was the Climber Small but my love of the hook, ink pen, and lengthier tools has settled the issue.... for now...Funny thing is, the Climber is like the cheapest SAK out there... I see them going for less than even Spartans and Tinkers... which is kinda crazy, and good for the wallet.
Anywho, I hope the parts from your Compact find peace and happiness in their new home(s).

At first people think why ever had the opener layer when the combo can do it all! But the problem is it is a compromise. Thinner steel and not as strong. It doenst work as well as a screwdriver either and that is really where it can get bent. Its a pain in the smurf tool for me to have to stock since so many people want it, but it only comes on the compact. So every custom I build with a combo is at least 2 SAKs for parts.
-
Well seeing Syph in here...
A Ti Compact with wood saw and metal saw, brass liners

-
@trichosirius said:
This one is coming apart and will be reincarnated as a Climber
Ooh! A Climber with a file hook!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login