Problem with super tinker scissors
-
So I bought a used super tinker. It had the standard "used" characteristics, so I washed it in soapy water and lubricated each tool to be smooth again; unfortunately, the scissors are problematic. I think that the two parts of the scissors are rubbing against each other too much because as soon as they meet, they become very stiff (this is before they meet the spring) and when I depress the scissors down all the way, the spring isn't strong enough to push them all the way back up because the friction is too strong. Is there something I can do to fix this?
I know it isn't the hinge because the scissors are very until the two blades meet each other.
Here is a video of my problem.
https://youtu.be/qBndgu4v7loI love the tool other than this issue and I hope I don't need to send it in. If anybody has advice, please let me know. Thanks, guys! :)
-
A picture of the scissors edgewise might help. They should both curve inward a little. I'm guessing one of them is curved a little too much.
You might be able to straighten one of the blades a little by placing it on a piece of wood and gently tapping with something soft (like another piece of wood). -
@smiller43147 said:
A picture of the scissors edgewise might help. They should both curve inward a little. I'm guessing one of them is curved a little too much.
You might be able to straighten one of the blades a little by placing it on a piece of wood and gently tapping with something soft (like another piece of wood).Sure. I'll get to that in a bit. You think it's fixable though?
-
I had something like this on one of my SAK's. After I lightly touched up the inner edges of the, well... edges, the rubbing went away. So my first attempt would be this, using a ceramic rod or diamod file, filing the inner sides of the scissor edges to get rid of possible rolls or burrs.
-
@smiller43147 said:
A picture of the scissors edgewise might help. They should both curve inward a little. I'm guessing one of them is curved a little too much.
You might be able to straighten one of the blades a little by placing it on a piece of wood and gently tapping with something soft (like another piece of wood).That's a good idea as well, I had scissors with a bent tip as well, and that caused problems with closing, so yeah, worth looking at that too.
-
A picture of the scissors edgewise might help. They should both curve inward a little. I'm guessing one of them is curved a little too much.
You might be able to straighten one of the blades a little by placing it on a piece of wood and gently tapping with something soft (like another piece of wood).That's a good idea as well, I had scissors with a bent tip as well, and that caused problems with closing, so yeah, worth looking at that too.
https://i.imgur.com/hSoNiPj.jpg
https://i.imgur.com/NQqcGiY.jpg -
A picture of the scissors edgewise might help. They should both curve inward a little. I'm guessing one of them is curved a little too much.
You might be able to straighten one of the blades a little by placing it on a piece of wood and gently tapping with something soft (like another piece of wood).That's a good idea as well, I had scissors with a bent tip as well, and that caused problems with closing, so yeah, worth looking at that too.
https://i.imgur.com/hSoNiPj.jpg
https://i.imgur.com/NQqcGiY.jpgHm. From looking at some of my scissors from the same angles and comparing them with the pictures I couldn't positively say that your scissors are bent. Maybe slightly, just a bit more than they should be, but a few taps, like Smiller said, surely can't hurt.
-
A picture of the scissors edgewise might help. They should both curve inward a little. I'm guessing one of them is curved a little too much.
You might be able to straighten one of the blades a little by placing it on a piece of wood and gently tapping with something soft (like another piece of wood).That's a good idea as well, I had scissors with a bent tip as well, and that caused problems with closing, so yeah, worth looking at that too.
https://i.imgur.com/hSoNiPj.jpg
https://i.imgur.com/NQqcGiY.jpgHm. From looking at some of my scissors from the same angles and comparing them with the pictures I couldn't positively say that your scissors are bent. Maybe slightly, just a bit more than they should be, but a few taps, like Smiller said, surely can't hurt.
Okay, what should I try next? I've been filing the edges with the diamond file on my leatherman wave and nothing is changing. Grease is coming out of the rivet, do you think I should let the scissors sit in some degreaser or something? Maybe that's it for all I know.
-
Have you tried Smiller's advice, hammering gently to straighten them a bit? Other than that, I have no further ideas, but maybe someone else will. I mean definitely. :)
-
The "moving" half (pivoting) of the scissors looks a little curvey to me.
Be gentle, and check the play after every gentle tap. -
Its usually micro burs in the cutting edge or tape residue if you cut open boxes. Soak in wd 40 overnight. It's unlikely they are bent it's one if the tools least bendable. If you try to bend any part of scissors they will actually snap instead of Bend. Different heat treat on these parts.
-
I have noticed that the scissors usually stick when there's some kind of goo on them, usually tape residue. Since most of my SAKs with scissors are old enough to still have a screw, I usually just let the screw out a bit until I can clean it, then clean it and tighten it back. When it comes to cleaning it off used SAKs, WD-40 does wonders. I'd try that before beating the crap out of it with a hammer--shears tend to break easily--I had a Bear and Son Gardener shear head shatter when I tried to tighten it up.
-
@cody6268 said:
I have noticed that the scissors usually stick when there's some kind of goo on them, usually tape residue. Since most of my SAKs with scissors are old enough to still have a screw, I usually just let the screw out a bit until I can clean it, then clean it and tighten it back. When it comes to cleaning it off used SAKs, WD-40 does wonders. I'd try that before beating the crap out of it with a hammer--shears tend to break easily--I had a Bear and Son Gardener shear head shatter when I tried to tighten it up.I tried WD-40, it didn't really do much.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login