Manker E02 first impressions.
-
So after seeing the Manker E02 for the first time in the forum I wanted to give one a try. I love single cell AAA and AA lights and it being a right angled light made it even more appealing. For $20 I figured what the heck.
I received it a couple days ago and have gotten some impressions of it to relay to the fine folks here at MTO.
First thing I noticed was the terrible pits in the metal as well as the poor finish. I also realized they forgot to include the extra O-rings in the package. I played with the UI and do not like it much. The UI just is not my style and not because it is slightly complicated as I love the Zebralight UI. The actual clicky is much to easy to press and is to pronounced. I wish it was recessed a bit or harder to click. I have already had countless accidental activations in the short time I have owned it. That is with the head of the light positioned either way on the clip. If it is head down in the pocket the contents of my pocket easily activate the clicky. If it is head up my hand or belt or whatever else constantly activates the light. It is fairly inexpensive, but for the quality of the fit and finish I feel like it should be a sub $20 light. The pocket clip is actually quite nice and has great retention and deep carry is always a plus. The tail magnet is very strong which is also very nice. That’s honestly the only two things I can say for the positives as of now. On paper it seemed like a great light for me but I overlooked a few details that make it a failure for me. The problem with unwanted activation and the clicky being much to easy to click is a huge problem and one that will cause me to never carry this light. I was really hoping to find a inexspensive right angled light that worked for me but I have been dissapointed in this one sadly. I am debating on keeping it as a “around the house” light, but I have plenty of those already. I may return it and try something completely different. I will give it a few more days before making a decision though.
Sorry for the negative review but I just want to put it out there in case anyone like myself is considering buying one. These problems may be problems for you as well.
-
I’m sorry to hear this, Captain. :(
Where’d you buy it? Pitted finish and missing oring would probably make me try to return it or get a refund, if possible. -
Bought it on Amazon.
-
Amazon has that nice return policy, right?

(Never had to use it, yet) -
Reading about your experience with the button got me thinking.

On my E03H, which I think has the same button, it requires about 160g (5.6oz) of force to press down.
I wonder if it’s the same for yours? -
Got my E02 yesterday and initial impressions are mixed as well. I know it's only a $20 but I'm left a little wanting. My finish was pitted and I got my o-rings bit I have the same feelings about the buttons tactile feeling. Clip should work really well and the magnetic tailcap will come in handy. Maybe I'm left wanting after getting the 4sevens mini mk2. That light is a beast in such and small package, blows my mind. But there's also a dollar difference that shows why they are so different. The new Fenix right angle is on my light and that may solve the problem. I'm going to rock the E02 for a few days and see if my initial impressions change.
Sent from my SM-T377V using Tapatalk
-
Two people with E02’s that had pitted finish?

Just to check, what does this pitted finish look like?
I wonder if there was a bad batch, I know that Jaya_man has an E02 that looks good, and I have an E03H with which I didn’t see any flaw in the finish. Also have another E03H on the way(long story involving the postal system) and will report on the finish of that one too.
-
I can only send pictures through email so I am not much help but I can send you some later if your curious.mine isn’t only pitted but the stainless ring that holds on the glass is also corroded. I thought it was dirt or grease when I first saw it but nope, it’s corrosion its a unfinished bit or something like that. A fairly large section as well. The pitting on the actual light is worse in some spots than others. Some portions are quite deep.
-
Well that definitely sounds like an anomaly. :ahhh
-
After playing with the E02 my feelings have changed somewhat. I love the extreme compact size for what it can do. Yes the on/off/mode switch is easy to press and it is an inconvenience. I was carrying it head up but had turned the light on accidentally. Now it's upside down and all usually carry is my pocket is my car key. Upside down it's deeper in the pocket with no exposed button. In turbo mode it has a respectable 220 lumens, not bad for a little light. Overall my impressions are changing for this incredibly affordable pocket light.
Sent from my SM-T377V using Tapatalk
-
any photos of the surface imperfections?
-
I didn’t take any photos as I can’t post them anyways.
-
@captain spaulding said:
I didn’t take any photos as I can’t post them anyways.
thought David might have had a pic as he mentioned similar issue. Have you tried Flickr Capt?
I use Flickr, but all I have is my phone now and I cannot seem to find out how to upload from Flickr from my phone for some reason.
-
Well the E02 is dead. I found the clicky button and reinstalled it but the light would not turn on. Went to unscrew the tailcap to check the battery and it was stuck. Got out the pliers and opened it up to find the brand new battery (name brand) had exploded destroying the light and lodging itself in the E02. I know it was not the battery as I have batteries from the same pack in other lights and they are fine. This has been the worst light I have ever owned and it’s been nothing but problems since day one leading up to a catastrophic failure. A complete waste of money.
-
Lithium battery?
-
wow, that light was cursed from the get go

Take a look at skilhunt H03, It's bee solid since I got it and much higher output with 18650 battery -
@Blackbeard said:
wow, that light was cursed from the get go
Take a look at skilhunt H03, It's bee solid since I got it and much higher output with 18650 batteryIt seems that way.

Nice looking light, but I can’t afford that right now and I don’t do 18650’s. I strictly only buy lights with AA or AAA’s with the exception of my 3D cell maglite. I have owned other battery type flashlights in the past, but stick with the AA’s or AAA’s now.
-
gotcha, I got it from grrbest months ago for about $25, much pricier elsewhere. If you want to get a cheap AA with good output take a look at Sofirn brand, they make decent budget lights that are high quality and good ratings on BLF
Maybe also look into some Ni-Mh batteries and charger, it has save me a lot of $ over the years, and they don't leak like alkalines, I have eneloops that are going strong after 7 years already.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login