A stropping poll
-
Stropping is a go-to technique for me. I find I often touch up a blade with a strop between uses. Or sometimes, just to make sure my blade is in tip top condition.
Having said that, I think there is an art to stropping and it can actually take the edge off a blade if done with too much enthusiasm and excessively. So, in my experience, it's neither a cure all nor a substitute for good sharpening.
Curious to hear y'awl's thoughts on this technique.
-
I want to know more about it really, what to get etc. I do it when done sharpening on the lansky. What do you use, do you also use compound or rouge? Pics please :D
-
I voted 'What's a strop?' because 'very, VERY rarely' wasn't an option.
I never need a blade so sharp that I need to strop. I stop at being able to cut phonebook paper cleanly, and that does't require stropping. To bring an edge back to that level just takes a couple light strokes on ceramic rods.
-
@Lynn LeFey said:
I voted 'What's a strop?' because 'very, VERY rarely' wasn't an option.I never need a blade so sharp that I need to strop. I stop at being able to cut phonebook paper cleanly, and that does't require stropping. To bring an edge back to that level just takes a couple light strokes on ceramic rods.
Ahhhhh....
...I meant to add that as an option. Oh! Wait! I did..... -
My Norelco had a bad reaction to stropping, so I quit. :P
-
Kidding aside, I have some 1 micron sheets that I use to finish an edge with, mostly wood chisels though, hardly ever knife blades.

-
@Lynn LeFey said:
I voted 'What's a strop?' because 'very, VERY rarely' wasn't an option.I never need a blade so sharp that I need to strop. I stop at being able to cut phonebook paper cleanly, and that does't require stropping. To bring an edge back to that level just takes a couple light strokes on ceramic rods.
Me too. I don't bother stropping, l just use ceramic rods to finish off and get them up to a hair popping sharpness... I do make sure the rods are always clean though.
-
I'm a stropping fool
. A good edge to begin with is important. I strop sometimes just to strop. Most of my edges are mirror polished as a result. Once in a while I do round over the edge but not as often as when I first began. If my edge needs more, then onto the ceramic rods for me as well. The problem is not all my edges are 20 or 25 degree. I will use the ceramic in hand on those particular edges and yes you guessed it, then I strop.I was recently testing some knives on heavy duty cardboard. Man that stuff is rough on edges. After the edge wouldn't cut as easily then off to the strop and I was back in business.
-
I've never stropped. I use the ultra fine polishing tapes on my edge pro if I want a polished edge and then a few strokes on a fine ceramic rod to finish.
-
I have only ever took a strop to my Spyderco Pacific Salt
No wait
I did lightly sharpen it to get a nick out of the blade when I first got it
otjer than that it only gets stropped :th: but I usually dont strop many of my other blades ::) It is very therapeutic to get a mirror edge on a blade

-
I always strop after sharpening or honing...

-
I strop my Salts too, but not that often. I mostly sharpen via ceramics and diamonds and leave the edge "as is" without a final strop.

Oh, and by the way, RIP *Stropman *

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login