tools to disassemble multitools
-
u mean those used to assemble pliers to handles? >:D :o :D

-
Show off :P :D
-
Welcome to the forum mate

-
Welcome to the MT forum ironhand

what I seen/read them use is the clips that many LMs have,
I've seen them use at least 2 different sizes.I'm sure J-sews one of our many experts will give you better
details (don't ask him about one-hand-opening blades whatever you do!) -
Ebay is a pretty good bet, i'm sure there was a seller selling screwdrivers purposely built for this. Some one will have a link somewhere :)
-
yes, the ones to take apart the leathermen. mine totally sucks! very sticky and hard to open.
After seeing your mods and the youtube vid, I though if I could get it apart I could polish it.
....of course all the mod ideas have really go me thinking too >:D
thanks for the welcome
-
You should be able to get a kit like this from a big hardware store, the common kits fit the new LM's with the 6 point security torx bolts , the bits need to have the hollow center though.
[(http://i291.photobucket.com/albums/ll287/multimat426/multitools/f2aa9c48.jpg)]
](http://
If you have a early model Wave or a Sideclip you can get screw driver kits from this seller
http://cgi.ebay.com/5-point-torx-plus-star-screwdriver-leatherman-wave_W0QQitemZ360098226967QQcmdZViewItem?_trksid=p3286.m20.l1116
eLEATHERMAN.com a member here sells the 5 point bits too.
BTW you can probably disassemble your LM with one torx bit but to get it back together you will need a second bit/screwdriver of the same size to tighten the bolts properly (they tend to spin with 1 bit) I bought a second chepo torx bit set , ideally you would just get the one size you need. In the US you have a far greater product rang/availability so it should not be too hard for you :D good luck mate. -
@MultiMat said:
If you have a early model Wave or a Sideclip you can get screw driver kits from this seller
http://cgi.ebay.com/5-point-torx-plus-star-screwdriver-leatherman-wave_W0QQitemZ360098226967QQcmdZViewItem?_trksid=p3286.m20.l1116Thats the one i was thinking about! :)
-
multimat, that's the ticket! :D
Security bit set! It's one of those things you see from time to time, but never need....till you do :'( Then you can't remember where you saw the damn thing!
Once I get this one straight, I'm soooooo gonna start looking at customizing!

thanks for all the help, guys
ironhand
-
Welcome ironhand!
I'd recommend getting those bits from eleatherman. Link = http://www.eleatherman.com/index.php?main_page=product_info&cPath=13_19&products_id=84
Rob (the owner) is a member and supporter of Multitool.org :)
-
@J-sews said:
Welcome ironhand!I'd recommend getting those bits from eleatherman. Link = http://www.eleatherman.com/index.php?main_page=product_info&cPath=13_19&products_id=84
Rob (the owner) is a member and supporter of Multitool.org :)
Rob advertisers the 5 point torx bit , for early Wave & Sideclip.Rob do you also sell the standard T10 & T8 torx bits for Leatherman fasteners ?
-
Just ask the question,someone will take care of you,Welcome aboard Ironhand.

-
Yes we stock in-store both the T8 and T10 in both standard and security bits from Qualtool. I'm at home right now but can get you a price tomorrow and can add them to the site as well.
-
I appreciate that, but I found some T10's locally, so I grabbed them.
Took everything apart last night! >:D I even took apart my old Gerber 600 tool - just for the helluva it!
Wife's not happy that I found another "new" hobby....LOL! :ahhh
But seriously, thanks to all of you for the help

Now my next question is where can I find parts (other than salvaging from another tool) ?
Is there somewhere that sells aftermarket parts?
ironhand
-
@ironhand said:
Now my next question is where can I find parts (other than salvaging from another tool) ?Is there somewhere that sells aftermarket parts?
ironhand
Only SOG (and Bear i think) sell new parts, the other brands you have to find a donor tool or ask on here as someone may have the bit you are looking for from a previous mod :)
-
WOW!
I was already looking at the SOG Powerlock S60 for my 11 yo son. He had trouble with the Leatherman and the Gerber doesn't lock it's tools as well.
But with the parts availability (as with firearms) SOG may tip the scales just because I can get the parts I want to switch out.
Of course, that's not as much fun and making them, but sometimes it's like re-inventing the wheel and not worth the trouble. I think I'll email SOG for a parts list for the Powerlock and see what they're pricing looks like.
thanks,
ironhand
-
No need to! Here: http://www.sogknives.com/store/components.html
-
I actually got the email from SOG before I saw your post.
I've already order one! LOL!
Really though, if it's easier to get parts from SOG - I'm hooked.
Makes the tool, as Magpul calls their AR15 grip - "mission adaptable".
Can't wait till it gets here

ironhand
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login