Using a multi to fix another multi
-
Yep I use the diamond file to reshape or correct any mishapen tools
and pliers to straighten anything that's not suppose to be crooked ::) :D -
I once used a Schrade Tough Tool to open the package of a Squirt.
-
I used a SAK to open my skeletool package >:D never liked those clamshell blisterpacks or w/e you call em.
I used my Swiss Tool awl to "drill" a lanyard hole through my alox (vic soldier) handles. The "mod" does the job, it's on the bottle opener side, but I do have to use spectra cord, anything else and it's gone in a day or two. Crude brutal but effective.
-
Yup! Use the diamond file on my Wave quite a bit, also used two multitools (can't remember which!) when taking apart and putting my modded MP600 together :)
-
I have used the file from my PST to clean up the pin heads whilst modding SAKs.
-
SAK and Charge pliers for dismantling my PST, and the file on my Charge has been used on a couple of blades.
-
I used the file on my Gerber MP600 to sharpen cutters of my other multis.
-
I am using a Vic Sak to remove other Vic Sak scales :) saw it on SOSAK.
-
ive used the surge diamond file to sharp the knife of the IDL T10

-
-
I use the diamond file on my Pulse or Wave to square off over-polished SAK screwdrivers.
-
@american lockpicker said:
I am using a Vic Sak to remove other Vic Sak scales :) saw it on SOSAK.
Good point, the small blade can get under most scales.
I think it's the can opener that is recommended over on SOSAK.
Which one the Vic or Wenger can opener?
The Vic one.
-
I've done it. :D First one that comes to mind is tightening PST screws with other MTs.
-
@american lockpicker said:
[quote author=ninjaz link=topic=7716.msg141410#msg141410 date=1227189645]
I am using a Vic Sak to remove other Vic Sak scales :) saw it on SOSAK.Good point, the small blade can get under most scales.
I think it's the can opener that is recommended over on SOSAK.
Which one the Vic or Wenger can opener?
The Vic one.
[/quote]I find it just a bit to fat, but it can be done for sure. I use the small blade from an old Spartan that is a bit of a beater, you can then slide the blade all the way from one side to the other. Give it a bit of a wiggle and the scale should pop right off.
-
@NeitherExtreme said:
I've done it. :D First one that comes to mind is tightening PST screws with other MTs.I've done that too :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login