Rust
-
Welcome to the forum Kadar

Your Leatherman is stainless but even stainless steel will rust if exposed to moist condituions long enough. The pool chemicals you are around may contribute to the problem.
There are some rust preventing wipes you can use to help in extreme conditions
like this
https://www.theruststore.com/Tuf-Cloth-P67.aspx
Some will come along and say get a Swisstool as they don't rust as easily but with a little preventative care you shouldn't have a problem with your Leatherman.
What model do you have ?
-
I agree, chemicals and pool chlorine are very corrosive, I will use SEAL 1 to prevent rust.

-
[quote author=SteveC link=topic=77488.msg1704595#msg1704595 date=1527515025]
Welcome to the forum Kadar
Your Leatherman is stainless but even stainless steel will rust if exposed to moist condituions long enough. The pool chemicals you are around may contribute to the problem.
There are some rust preventing wipes you can use to help in extreme conditions
like this
https://www.theruststore.com/Tuf-Cloth-P67.aspx
Some will come along and say get a Swisstool as they don't rust as easily but with a little preventative care you shouldn't have a problem with your Leatherman.
What model do you have ?
[a wave and surge] -
SOGs are also said to be stainless. Maybe you go the way of those patentedandawsomelysexy SOG tools?...
-
Welcome to

As already said stainless is not rustfree but only rust resistant ;) Wet environments will rust most stainless steel (shiny is a bit more resistant) but all will rust if around certain chemicals

-
Welcome. Not even the Swisstools will survive chemical and wet conditions for long without some kind of treatment and constant attention. I've have personally seen Swisstool rusty. I live near the ocean and leave my Swisstool in the garage. Its already needed an application of WD4 to keep the tools from sticking.
-
Welcome Kadar
As has been mentiined, protecting even stainless steel in wet environments is necessary.
What model do you have? Reason being, I find the old-school mods to do well against rust because they tend to have a smooth, shiny, polished finish, which I think is more rust resistant. A lot of the newer stuff has a bead blasted finish, which I find more prone to rust.
I don't disagree with anything said so far. All good choices. For me, it's simply a polished finish with a light coating of light machine oil (3-in-1 oil) every now and then. Just wipe the excess away and keep the tool in the sheath so as not to stain your pocket.
-
as others said, welcome! And things that will get your tool rusted quickly, are
- moist environments, air humidity, hot humidity especially :ahhh
- chlorine and other chemicals found in pools

- bead blasted finishes, open carry (as opposed to sheathed, in a bag, etc.) that allows exposure to humid air

- not wiping and drying the tool thoroughly, especially after getting it wet or submersion :P
- not using a coating agent (3 in 1, ballistol, TuffGlide, maintenance oils, greases, WD40...)

so I recommend giving it a layer of oil especially at the joints and tool pivots, but hanbing first cleaned and polished the present staining, pitting and rust.

and maybe switching to older Leatherman (non bead blasted) or more polished tools (Swisstool, SOG...) if you find a suitable tool
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login