Tools for SAK mods?
-
Basic toolkit would include a drill with 2.2, 2.5 and 3mm HSS bits, some metal files, centre punch and something (maybe a nail) to punch pins out, 4oz or so ball peen hammer and a surface to peen on. This can be as simple as the flat surface of a hammer, a vice with a small anvil on it or an anvil.
That should get you started

-
If I buy a few Saks and use existing parts, do I need to drill anything? I've got plenty of drill bits but thought it would be as simple as assembling parts and pinning together. And I would need pins and the rings that you attach the scales to as well, correct?
-
The pins need to be drilled out in order to dismantle the SAK - If you're removing layers you can use the existing pins (and rings) but if you're increasing the layers you'll need some new pin stock.
Have a look at the SAK modding sticky: </topic/43303
Lots of great info and pics.

-
Don’t forget a small bench vise... I use it to secure saks for drilling, peening and putting on scales... also comes in handy for when I need to do some filing... I also use it as a base for my lansky sharpeners...

Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login