Fire Damage
-
If the scales didn't completely cook away, there's a chance that it didn't get hot enough at the blade steel to ruin their original temper. Still, sorry for your loss of SAKs and damage to your home :( I hope you and your family/housemates/pets/whomever are otherwise well!
-
Thanks, nobody was hurt and Boris the tortoise survived so it’s just a waiting game for the rebuild right now.
I am a complete amateur when it comes to SAKs and have only just joined the forum so please excuse any errors I make.
Is there a sticky or webpage anywhere so I can identify what models these were as it sounds so lame referring to “the small one”.
So anyway, I cleaned up the small one and fitted some new scales and it functions as it used to. I’m presuming if it was affected, it would have softened and not hardened any metal.

As you can see it is in ‘loved’ condition as it was my most used out of all my pocket knives. It also has the corkscrew, but the small corkscrew driver hasn’t been replaced yet.Sent from my iPad using Tapatalk
-
@fred2892 said:
Thanks, nobody was hurt and Boris the tortoise survived so it’s just a waiting game for the rebuild right now.
I am a complete amateur when it comes to SAKs and have only just joined the forum so please excuse any errors I make.
Is there a sticky or webpage anywhere so I can identify what models these were as it sounds so lame referring to “the small one”.
So anyway, I cleaned up the small one and fitted some new scales and it functions as it used to. I’m presuming if it was affected, it would have softened and not hardened any metal.As you can see it is in ‘loved’ condition as it was my most used out of all my pocket knives.
Welcome to the forum fred!

Glad no one was hurt.
That small one cleaned up great.

Here is the URL for Sakwiki for information on Swiss Army Knives
-
Thanks for the link, can’t find exact model but it is the same as 91mm compact but without the hook.
The second knife in the original pic is a 111mm Adventurer. It was gifted to me as a Danish Army issue knife, but I am sceptical of this as it had no military markings and I can’t find reference to Danish issue SAKs.Sent from my iPad using Tapatalk
-
Maybe an 91mm Golfer then? Welcome to the boards fred.

-
Could be a 91mm Compact made before 1991?
After all, they only started producing the hook in 1991.
Welcome to MTO.
-
Hi fred2892 and welcome to

I am glad to hear no one got hurt
And good luck with the rebuild
-
Good to hear no one was hurt. Sorry to hear about the fire regardless. About the temper on those 2 damaged SAKs, yes I believe they could very well effected.
-
Thanks for all the welcomes.
According to http://victorinox.metodi.me/91mmtools.php
It has a pre 91 corkscrew and pre 92 scissors so I think Don Pablo has nailed it as a pre 91 Compact.Sent from my iPad using Tapatalk
-
A pre 1991 Compact IS a 91mm Golfer, like zoidberg said.
It was only when they added the hook they started calling it a Compact.
And welcome!!
-
Thanks for the correction, like an idiot I never even looked at the Golfer as I presumed it would have a divot lifter or a marker or at least something relating to golf.
Sent from my iPad using Tapatalk
-
@fred2892 said:
Recently had a house fire. Here’s a couple of SAKs that suffered.

Is it likely the properties of the blades have been altered enough by the heat to have affected them?Sent from my iPad using Tapatalk
Firmly sitted on my mechanical engineer training, I can assure you that the temper of your blades has not suffered.
To moderately change the properties, just to soften the temper, you need to go above 270° Celsius,
and that leaves a coloration on the steel, which is not the case.By the way, it's a shame I live in Europe, because I have a lot of 111mm scales to give away.
Glad you are safe. Do not forget to lube your pivots with FDA approved lubricant. -
The tip of your yellow knife could easily be put back in better shape on the back of a stoneware plate. Here is a climber I did. No special tools, just elbow grease and patience.


-
Thanks, it’s good to know the blades won’t be affected. I’ll have a go at improving the blade on the golfer as you suggest. I would never have thought to use a plate though, that’s a new one for me.
I am almost in Europe, I am in Norfolk, England.Sent from my iPad using Tapatalk
-
Sorry to hear about your troubles, mate.
:(
Welcome to MTo!

-
Recently had a house fire. Here’s a couple of SAKs that suffered.

Is it likely the properties of the blades have been altered enough by the heat to have affected them?Sent from my iPad using Tapatalk
Firmly sitted on my mechanical engineer training, I can assure you that the temper of your blades has not suffered.
To moderately change the properties, just to soften the temper, you need to go above 270° Celsius,
and that leaves a coloration on the steel, which is not the case.By the way, it's a shame I live in Europe, because I have a lot of 111mm scales to give away.
Glad you are safe. Do not forget to lube your pivots with FDA approved lubricant.Thanks, it’s good to know the blades won’t be affected. I’ll have a go at improving the blade on the golfer as you suggest. I would never have thought to use a plate though, that’s a new one for me.
I am almost in Europe, I am in Norfolk, England.Sent from my iPad using Tapatalk

:D :D :D :D
-
Almost not in Europe

-
@Mechanickal said:
Almost not in Europe
Good one

-
Schrodinger's european country...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login