Tool test
-
Great test so far [emoji106] Good job

Sent fra min FRD-L09 via Tapatalk
-
Thanks, Antti...now I know what my next MT buy will be; an ST300!!!

-
This reiterates why I prefer outside opening/one-handed opening tools. You lose so much tool edge on that corner otherwise!
-
Good you did this. Thanks for posting

-
Nice tests, Antti

Looking forward to them tomorrow

-
Antti -
@GOAT Tools said:
This reiterates why I prefer outside opening/one-handed opening tools. You lose so much tool edge on that corner otherwise!To correct for the inside opening blade to be fully exposed for cutting, I unfold the handle and leave the pliers head tucked. The ST300 is large enough for ample grip. and allows the full blade to be used for cutting, whittling, scraping...
Also, with either screw driver blade extended, the unfolded handle allows for added torque to break free a stubborn screw, either Phillips or slotted.
-
@GOAT Tools said:
This reiterates why I prefer outside opening/one-handed opening tools. You lose so much tool edge on that corner otherwise!
To correct for the inside opening blade to be fully exposed for cutting, I unfold the handle and leave the pliers head tucked. The ST300 is large enough for ample grip. and allows the full blade to be used for cutting, whittling, scraping...
Also, with either screw driver blade extended, the unfolded handle allows for added torque to break free a stubborn screw, either Phillips or slotted.
I wouldnt do that, maybe only for blade but not for adding more torque to philips, thats how i have broked my Waves handle. It add more torque to exsmple for philips head and maybe break free stubborn screw but also adds torque to handle and it may break down easily.
OHO blades are good but luckily ST300 has enough long blade so i dont mind losing little edge because corner and like LC said if needed whole blade edge to use which happens very rarely. Picture shows that i can use whole blade edge to carve wood
Only Tools Matters

-
@GOAT Tools said:
This reiterates why I prefer outside opening/one-handed opening tools. You lose so much tool edge on that corner otherwise!ST300 and Surge have the same length blade.

-
Same lenght but Surge has bit longer cutting edge than ST300 (2-3mm longer) but overall size same
Only Tools Matters
-
@Antti Lammi said:
Same lenght but Surge has bit longer cutting edge than ST300 (2-3mm longer) but overall size sameOnly Tools Matters

Nice read so far.
-
Subscribed!


-
Test number 5
5.Can opener / wire stripper
This win goes only easiness and comfort to use and thats ST300. Every tool did their job like suppose to open cans and wire stripping. Surge has same can opener as ST300.
I gotta say this wasnt fair test to Wave cause i have grinded it bit but wire stripping was same as others and comfort takes win

Only Tools Matters
-
Test number 6
- Phillips
Well this test wasnt equal to all tools but still did test with regular bits what came to Surge and Wave. Wave and Surge has advantage on this caus changeable heads and extendable.
But i still choose winner ST300 it has longest and most solid Phillips head between these.
Even if you use extender on Wave and Surge. Surge&Wave with extender cannot fit same places as ST300 phillips head, cause its slimmer than extender and you can use more force on ST300 than Surge and Wave. But other hand Wave and Surge has more wider selection of phillips head than STs.
Only Tools Matters
- Phillips
-
Test number 7
- Flat Heads
Well this category has advantage on Surge and Wave but if we talk only on solid flatheads winner is OG ST cause it has widest range solid flat heads it has smallest solid flathead and largest flathead is enough large to complete job. But then if we talk overall including bits then win goes to Wave cause changeable flatheads it has regular bitdriver and small bitdriver and it has widest range.

Only Tools Matters
-
Test number 8
- Awl
This was fun category to test and winner is ST300.
Surge and ST300 has same awl but id still prefer using ST300. Reason for that is comfort to use ST300 just was better held in hand than Surge.
OG ST has diffrent kind awl and it did do job good as ST300 and Surge.
Wave doesnt really have own awl but you can use scissor to awl. Wave awl made smallest hole in wood but it recommed that you dont use it anything hard, it can twist and break easily if used too much force and then theres no scissors anymore on your Wave so caution when using it to make holes
Only Tools Matters
- Awl
-
Excellent testing Antti well done

-
Test number 9
- Pliers / Cutters
Winner is obvious and its ST300 and reason for that is handles. It has changeable cutters what Wave and OG ST doesnt have, those two has really good cutters and needlenose pliers but not good enough take win.
Surge has same Pliers as ST300 but really good advantage ST300 is handles. With Surge it very easy to pinch yourself whit that handle and OHO desing.I used cutters to cut nails and wires.
Used pliers to grab things and screw some nuts and bolts.Only Tools Matters

-
And last test
- Overall
Well this was quite difficult category to determine winner. It deeply depends on your needs but if we talk overall useability win goes to Wave cause it has allmost everything you may need.
Bitdriver large and small gives wide range of heads to use.
Size of it, it easy to carry in pocket.
OHO blades, easy and fast acces to blades, file and saw.
Only missing thing is awl.
But in the other hand win goes to Surge if needed sturdier tool and if needed more selection saws Surge is choice. It has large bit driver but lacks small bit drives but has awl instead of it.
It has OHO blades, scissors and file/saw holder.If we talk about comfortness to use win goes to OG ST cause it slim, has good selection of tools and blades but lacks changeable cutters.
Last but not least winner is ST300 it has updated tools of OG ST and has much sturdier and it feels better in hand.
So if we count points winner for this category is SuperTool 300.
But i would pair something with ST300 and that is Wave cause its easy to pocket carry and its flexible tool so i would say best combination for everyday use is ST300 + Wave.(tho also ST300 could go with SAKs but that way diffrent thing than comparing Leathermans)I make new review when i get my hands on Rebar

Only Tools Matters
- Overall
-
That was fun!

Why did you grind the Wave can opener?
The Rebar is excellent. It is so comfortable to hold. I love it.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login