No cybertool bit kit?
-
Was comparing some options for my next SAK. Was very much interested in a cybertool until I found out that vic doesnt make any ball detent, double sided bits to go with their cybertool. Does that mean that we can’t have any bits other than the 4 that Vic deems that we need? ??? I know of the magnet mod but would rather not do that, I would like having bits that are made for the tool to prevent slipping if I am tourquing it.
-
There are 8 Vic bits (all used in the XAVT).
There was a thread here once that showed other ball detent bits.
The ball detents were in a slightly different place but worked.I also remember it was quite an expensive piece of kit...
No time to search for it atm.
-
So far, the only one I'm aware of: KRAFTWERK
I recommend putting a magnet in, then you can use any bits.
Something like the "Red Cycling Products - Micro Pocket Tool" -
Any advice or guidance on how to magnetize the Cybertool bit driver?
-
@GoatDragon said:
Any advice or guidance on how to magnetize the Cybertool bit driver?By glueing a small rare earth magnet in the driver.
-

@Etherealicer said:
So far, the only one I'm aware of: KRAFTWERKI recommend putting a magnet in, then you can use any bits.
Something like the "Red Cycling Products - Micro Pocket Tool"IIRC , Whia made or used to make some ball detent bits , but to be honest , a rare earth magnet seems more practical , there are 4mm to 1/4”( 6.? mm bits ) adaptors .
Best Regards,
Chris
-
Those adapters exist, are hard to find, and cost a small fortune for some reason...
-
I believe the Victorinox 4mm bits are manufactured by german Felo. The 8 bits offered by Victorinox should be these: http://www.felo.com/en/catalog/series/sbit/
(Rotate that banner until you see some double sided 4mm bits at 28mm length).
Might also be on their catalogues page 154 (if the webinfo is up to date).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login