The Portable Generator thread
-
As I promised in the tornado thread, here is a closer look at my generator, a Honda EM500.

My father gave me this little generator a few years ago and told me that it likely needed a new air filter, so I called my local Honda dealer when I got home to see how difficult this would be, and I assumed it would be virtually impossible as this generator has got to be close to 40 years old.

I don't know if this little machine is older than me or not, but I do recall that it was there on the vast majority of camping trips we went on when I was a kid. I actually don't recall a camping trip that this little generator wasn't on! Needless to say, I was pretty excited when my father offered it to me.

The Honda dealer actually had no issues finding and ordering a replacement air filter for me, and that really surprised me. Score one for Honda, especially since the old air filter just crumbled out of it when I opened the black filter cover. There wasn't enough left of it to remain whole when I tried to remove it. I guess that's not much of a surprise, considering my father hadn't used it in a number of years.

My father is perhaps the most fastidious person I have ever known when it comes to looking after and maintaining equipment, but even so, I assumed this little generator would need some coaxing to fire up. I hadn't installed the new air filter when I got it, and I kept thinking "I really should have a look at that generator sometime, preferably before I need it" and yet I never did.

Unsurprisingly, knowing my father, the oil was actually really clean, despite being many years old, and a little bit of fresh gas got this machine fired up on maybe the third pull of the cord! I don't know if that's a testament to how well my father looks after things, or how well Honda makes them, but I have to say that I was seriously impressed.

That first night I ran the generator for about two hours straight, absolutely without a hitch. Neighbors came over and plugged in their phones and appreciated this little machine as much as I did. The next morning I managed to find oil for it and changed the oil in it before running it again. It ran beautifully the night before, but why take chances, especially on since a great little generator!

It's simple to run- gasoline goes in the top, oil goes in where the yellow cap is (got to love a 4 stroke and no mixing!) flip the switch into the on position and pull the cord. Now that there's fresh gas and oil in it, the motor is running before you even manage to pull the cord all the way out... on the first pull. I can't imagine how this generator could run any better when it rolled off the assembly line than it does today.

Once the motor is running, you simply adjust the throttle on the side until it is running at a stable 60hz, which you can see on the dial on the front. The green light right above the dial is the pilot light to let you know it's running, which I don't think is necessary as this is nit the quietest generator out there. It's not overly loud, but it is certainly noticeable. It doesn't have any sound dampening insulation inside, so that's not really a surprise. Of course, the thing already weighs 40-50lbs on it's own, so I can't imagine that you'd want to make it heavier with insulation! :ahhh

Ok, so it's barely big enough to charge batteries and won't run a fridge, freezer, washer, dryer and home theater system- that's not what it's meant for. It will do a great job of charging trailer or car batteries, phone, computer and tablet batteries and so on, which makes it very handy to have when power isn't available, be it a camping trip or the power outages resulting from a natural disaster.

I figured that since we have a thread on drills and a thread on hand tools that a thread on generators was the next logical step, and I have been intending on starting this thread ever since getting this little generator years ago!
So let's see your generators, and/or the generators you work with!
Def
-
Awesome idea!! I’ve been thinking of getting one so definitely checking this thread!
-
Having owned several Honda cars and a Honda lawnmower, I'm not surprised with your experience with this machine.
-
Good looking bit of kit

I no longer own mine, but it was a real gem. 2600W with a quasi sine wave, which would run all but the most temperamental of electronic devices and appliances. It purred like a kitten on low power, but screamed like a Wookie that had stubbed it's toe at peak load. It ran chop saws, power drills, angle grinders, lighting rigs, you name it. It let me cut three 100mm diameter vents, and a (roughly) 375mm x 500mm hole for an escape hatch in 6mm steel plate on a single tank.
I got rid of it when I sold the boat, but to be honest I don't regret it. It was an excellent bit of kit, but I'd probably hospitalise myself trying to carry it or pull the starter these days
I have no doubt that whoever has it now is still getting good use from it. -
@smiller43147 said:
Having owned several Honda cars and a Honda lawnmower, I'm not surprised with your experience with this machine.My experience with Honda cars (admittedly somewhat out of date now) is very different, and I doubt I'll ever drive one willingly.
That having been said, motorcycles, generators and other small engine products are among the best IMHO.
Def
-
@Grant Lamontagne said:
Having owned several Honda cars and a Honda lawnmower, I'm not surprised with your experience with this machine.
My experience with Honda cars (admittedly somewhat out of date now) is very different, and I doubt I'll ever drive one willingly.
That having been said, motorcycles, generators and other small engine products are among the best IMHO.
I grew up a Chevy man, but one too many 70/80's POS and I tried Toyota and Honda. Pretty much stuck on the Hondas now.
There is a racist sounding car expression: "Once you go Japanese, you'll never go back".
They are indisputably small engine experts. -
That's a really good piece of technology. Even after 40 years... How much output can you get from it?
-
That's a lot of power.
If it were Japanese it would run on nuclear power. Enough fuel for a lifetime and a Fukushima at your fingertips if the cooling system fails.

-
@ulzhan said:
That's a lot of power.If it were Japanese it would run on nuclear power. Enough fuel for a lifetime and a Fukushima at your fingertips if the cooling system fails.

Lol. That only applies to 70’s nuclear stuff. The modern stuff uses molten nuclear fuel that is it’s own coolant. Can’t meltdown if it’s already melted!

-
@ulzhan said:
That's a really good piece of technology. Even after 40 years... How much output can you get from it?When it comes to fancy electrical stuff, I have no idea. I put gasoline in one end, electricity comes out the other. :D
According to the Owner's Manual though, it spits out the following:
AC Power-
Rated Voltage 120V
Rated Frequency 60hz
Rated Amperes 3.3 A
Rated output 400 VA
Maximum output 500 VADC Power-
Maximum charging output 8.3 AAlso according to the manual, the dry weight of the unit is 18kg or 39.7 lbs, so my guess of 40-50 lbs above wasn't too far off.
And, I forgot to mention that, in total I probably ran the generator for 5-6 hours on three dollar's worth of gas (gas currently being about $1.25/L here, so just over two liters or just over half a US gallon, and I still have lots in the generator and more in the gas can. I don't think I even burned through half of the fuel I got for it. It's nice to know that I can run it that cheaply for an extended period of time and not break the bank.
Def
-
Based on that, my online calculator says anything from 0 to 400 (rated) 500 (maximum ) Watts, depending on the power factor, which I don’t know.

And I hereby issue an apology for saying earlier that its power was 5000 watts.
-
Rated output 400 VA
Maximum output 500 VAThis is data that can be converted by the common man to Watts without having to worry about anything.
However, the manufacturer doesn't know what you'll hook up to it.
Purely resistance equipment? (Electrical heater for example) Capacitive equipment? (Capacitors for example) inductive equipment? (coils for example)Since these different loads alter the max output, the manufacturer always displays the max amount of VoltAmpère. Which tells us more about the max load with these different loads.
For the common user: 400Watts in general, 500Watts in peak.
-
Thanks Nick.
I was wary about saying the 400 VA = 400 Watts, despite knowing that Volts*Amps=Watts, because of the “power factor” thing that I don’t know much about. -
I figured that much myself, but what I don't know is what can I do with 400 or 500 watts. I don't imagine that is very much, but my father did say that he has run a drill off it in the past, and I know we used it to charge the trailer battery, but I really don't know much (anything) about electricity.
Def
-
An LED light is usualy around 4-6Watts.
So if your entire home has LED lights, you can power all lights. But not the heating/washer etc.
-
@Grant Lamontagne said:
I figured that much myself, but what I don't know is what can I do with 400 or 500 watts. I don't imagine that is very much, but my father did say that he has run a drill off it in the past, and I know we used it to charge the trailer battery, but I really don't know much (anything) about electricity.Def
Most plug in equipment will have it's wattage shown somewhere.
Alternatively, divide 400 by your domestic current (120V) and it will tell you the amps you can draw (3.33A). If whatever you're plugging in needs a fuse bigger than 3A, you're gonna struggle.
No heater elements (washing machine, kettle, iron...)
No microwave... a 500W genny can't run an 800W nukeing box ;)
Some small motors will be OK, and your power tools will likely say what power they are/need.
Chargers, laptops, all fine... so long as you're not trying to charge everyone on the street's phone all at the same time. -
My phone charger is 10w, and laptop chargers are around 20w.
-
@Don Pablo said:
My phone charger is 10w, and laptop chargers are around 20w.Wrong!
Your charger would be 10W at maximum load. It DELIVERS up to 10W.
P = U * I
So: Watts = 5V * 2A(which is the max output of the better chargers) = 10W IF you are using the full 2Amps. Phones rarely use all 2Amps.Same for the laptop charger. It's the max output.
-
@Don Pablo said:
My phone charger is 10w, and laptop chargers are around 20w.
Wrong!
Your charger would be 10W at maximum load. It DELIVERS up to 10W.
P = U * I
So: Watts = 5V * 2A(which is the max output of the better chargers) = 10W IF you are using the full 2Amps. Phones rarely use all 2Amps.Same for the laptop charger. It's the max output.
Just being conservative. :D
If I had Defs generator, and a bunch of people wanted to charge their devices, I would not go over 400 Watts total, using the maximum rating on their chargers, to keep my generator healthy.
Too many variables at play when charging over ten phones. :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login