Vic. Bit extender question
-
Hi guys,
I've received my Vic. bit extender today to add to my Spirit X and bit kit.
To my surprise it's not held in place when put into the Vic. Bit L-Wrench...

A closer look reveals that its diameter is a tad smallish...

Is that normal?

-
That doesn't look normal.
It should lock and not fall out. Tested it with my bit extender which locks.
-
Is the retention ring within the L Wrench missing or loose?
-
But it holds bits securely?
-
Thanks guys!
The L-Wrench does hold bits securely.
The retention ring is in place.I guess the hexagon shaped end of the Extender is too slim as the comparison with a normal bit shows?

This is weird. I'm hesitating to buy another one :-\
-
Just put the Vic. Bit-Extender into my Leatherman Bit-Extender and it's basically the same.
The Leatherman Bit-Extender does hold it a tiny bit. Just enough to defy gravity.I guess I have a faulty Vic. Bit-Extender

I don't think it's worth to sent in :-\ -
Can’t remember whether mine has that problem... will check once I get home...
-
-
Happy new year to everyone

-
-
@MTMatt said:
I guess I have a faulty Vic. Bit-Extender

I don't think it's worth to sent in :-\I think you should, if only so that an example of faulty Victorinox workmanship gets recorded. ;)
@MTMatt said:
I guess I have a faulty Vic. Bit-Extender

I don't think it's worth to sent in :-\I think you should, if only so that an example of faulty Victorinox workmanship gets recorded. ;)
I'd imagine it would benefit Vic on some level
.You're right. That does make sense Synco and Aloha

-
As promised... I just checked all of my L wrenches and extenders... none of them comes off easily... although it’s not a snug fit...

Apart from the 2nd and 3rd item from the left, all are Vic products...
I don’t use one of the L-wrenches and Vic ratchet... they’re more like for collection... I prefer the Topeak ratchet over Vics as it has a direction lever and the other end has a magnet insert... Maybe if the L-wrenches had magnets at both ends, then bits and extenders won’t come of that easily...

-
Thanks a million Jaya

Your bit extender seems to show deeper groves for the retention springs, and the edges are more defined.
Mine looks like being rounded/polished off too much.
That could support my theorie about the diameter being too small.I'm not sure how that could happen at Vic. factory.
Nice assortment btw.

-
-
@MTMatt said:
I guess I have a faulty Vic. Bit-Extender

I don't think it's worth to sent in :-\I think you should, if only so that an example of faulty Victorinox workmanship gets recorded. ;)
I was actually being a smartarse
but I now see a more meaningful aspect to my comment.
...I might be too lazy to sent it in.
Maybe I find something else to sent it with
-
@jaya_man said:
As promised... I just checked all of my L wrenches and extenders... none of them comes off easily... although it’s not a snug fit...
Apart from the 2nd and 3rd item from the left, all are Vic products...
I don’t use one of the L-wrenches and Vic ratchet... they’re more like for collection... I prefer the Topeak ratchet over Vics as it has a direction lever and the other end has a magnet insert... Maybe if the L-wrenches had magnets at both ends, then bits and extenders won’t come of that easily...

Thats a nice collection of Vic tools there!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
