Cull Update
-
@gerleatherberman said:
The 600 BN is one of my personal favorites! I really cannot think of a stronger pliers head on any other MT. :)Will you be posting a step-by-step for the SAK mods, AW?
A brief video hopefully. They'll all kind of overlap, as all (well, most) of the scale materials need treating at the same time, as I only have enough low viscosity epoxy to run one batch, and there's an obscene amount of work to do before I get there. A lot of experiments in processing different materials too, like hand cutting garnet and other stones, and seeing how thin Whitby jet and mother of pearl can be processed before they disintegrate or become unstable.
I'll try to get a little footage of everything I do (if I don't get too engrossed and forget), and then stitch everything together for each knife created at the end. Much learning to do first though, so it might be another year or two before I have anything finished.
-
A few changes to the Diesel kit.
I'm swapping over some of the writing and measuring implements, but more importantly, I'm going to replace the Soft Touch 14 with a Cybertool 41. That way, I can pocket the Vic, and leave the rest of the mini toolkit in a bag, so I've got a comprehensive tool selection on me, yet still have the other stuff close to hand if the knife is overwhelmed. At the moment, the 41 has ruby scales fitted, but I'll swap them for black ones, so the knife matches in with the rest. :D
This leaves me back with the ST14 for general pocket carry (I wasn't happy having it tied up to a kit), and everything else just squeezes into this Skinth for chucking in a travel bag, or using as a grab bag. The light/lantern and Cybertool are in the outside pockets, so I can get at those without the pouch vomiting everything else out everywhere


-
Nice kit Al !

-
Thanks Steve.

It used to be a kit I grabbed when friends were moving house, or had some odd jobs they needed a hand with. These days it sits idle most of the time, but I still throw it in the bag occasionally when visiting friends or family. I think the tools in that kit are better than some of them have in their whole house :D
-
@AimlessWanderer said:
A few changes to the Diesel kit.as Steve said, very nice kit!

I have a similar one, which I use for similar purposes

-
@ThePeacent said:
as Steve said, very nice kit!
I have a similar one, which I use for similar purposes

Thanks TP. What else was lurking in the pouch? Do you have a pic of the full kit?
-
I'll echo what the others have said, Nice kit. I figured we all had some kind of grab and go kit for times when visiting friends/family :D. While most items I just want to be a guest like the others, they know we carry tools so.......
I do have an actual bag of tools on my truck but most times a small kit like yours can solve a lot of issues.
-
@Aloha said:
I'll echo what the others have said, Nice kit. I figured we all had some kind of grab and go kit for times when visiting friends/family :D. While most items I just want to be a guest like the others, they know we carry tools so.......I do have an actual bag of tools on my truck but most times a small kit like yours can solve a lot of issues.
Absolutely!
I used to carry this kit (with a couple of subtle differences) in the smallest of the Maxpedition EDC pouches, and had it in my pocket when I visited some friends who had just moved into a new house three or four years ago. I went to use their bathroom, and when I tried to get out, the door handle came away, and the spindle dropped on the floor the other side.

I heard my friend shout "Oh, has it done it again?", and by the time she'd walked through and picked up the handle and spindle, I was already opening the door :D I fixed that, fixed a dodgy lightswitch, replaced a broken cupboard hinge, and sorted a couple of other things, just with that kit in my pocket. I did have some more stuff in the car, but never needed it.
When another friend moved house, it changed locks, fitted baby gates, harvested sticks for dowels for plugging the door frame where the hinge screws had pulled through... it's certainly paid for itself.
-
I mentioned when I posted the "formal" combo pic, that my intention was to polish up one of my Sideclips.
I've since gotten some Micromesh to do this with, but have noticed that the original brushed finish was hiding a multitude of sins. Even after giving the surface a good rub down with some 600 grit wet and dry, there's some significant "orange peeling" which would involve removing quite a bit of material to fully clear it (pic attached). As such, I might need to polish up both of them, and piece together the best components from each, if I want a flawless finish. ::)
I think that might be more work than I want to do though, so I might just polish this up as is, and tolerate a little residual "character". Nobody other than me would really know anyway. I just don't want to put all that effort in, and still not be happy with it though

Undecided....

-
I went down the uber polish hole for a brief moment. Man I got a little crazy. I polished a lot of tools that really didn't want to be polished. A Kershaw Leek for example was so slippery when all done that it was almost unusable. My Wave, some PSTs, certain SAK tools, a Swisstool ( yup ), and a lot of other things I dare not post
.I don't mind the character these days. Not sure whats changed? My Buck 110 is a great example. I got it in rough shape but stopped very short of removing the previous life it had. Cleaned it up just enough for my time with it and development of character.
Oh, but I'm still probably gonna get some micro mesh ;). I didn't say I was cured.
-
@Aloha said:
Oh, but I'm still probably gonna get some micro mesh ;). I didn't say I was cured.
Still early days for me, but first impressions are very good. 
I'm a bit odd with acquired character and natural patina (some would say I'm odd with a lot of things :P ), I don't mind it, so long as it's me that put it there. If this Sideclip gets scratched up a bit in use, no problem - but that orange peel finish in a couple of areas, wasn't my doing, or not necessarily acquired while it was with me. :-\ I really like the looks of older knives, so long as I got it new.
One of the reasons I wanted to cut back, was so my reduced array would see more pocket time, and start to look like faithful companions sooner. I wouldn't want to buy tools in that condition though, only take on that look from being a part of my life. Patina I put on has meaning, buying a "worn in" tool does not (for me). In five or ten years, I want my favourites to be obvious, purely because they'll reflect the days they spent with me. There's only three of my pocket knives that have acquired that look so far, but some of the multis and Swiss knives are starting to take on that look too.
-
@AimlessWanderer said:
Thanks TP. What else was lurking in the pouch? Do you have a pic of the full kit?H AW,
sorry but it was an opportunnity pic,
taken at the moment I was swapping items by chance, but the contents of it are most times:Crater C33
Pliers based multitool, full sized (such as Spirit, ST300, SOG Powerlock...)
Precise needlenose pliers multitool (such as Squirt, Juice, etc.)
Tweezers, full size and locking, and Nail Clipper
AAA Flashlight
Pencil
Pen
Band-Aids, Steri-Strips
Spare Battery
Tape, Paper Clips, Carabiner
Pocket Prybar with wrench
Lighter(s)
Utility Knife W/Replaceable blades
Bit Kit
OPT with several allen and screwdriver tipsI also have this small pouch, with different gear, which rides in the vehicle permanently



-
Thanks TP.

For some reason (not sure why, as they're not shown/listed) that reminded me to put some small cable ties in my kit. Now done.
Are they mini vials of Superglue in the first pic?
-
@AimlessWanderer said:
Thanks TP.
For some reason (not sure why, as they're not shown/listed) that reminded me to put some small cable ties in my kit. Now done.
Are they mini vials of Superglue in the first pic?
oh, I sometimes have zip ties in the pouch too

those are eye drops (I had dry eyes for a while after the LASIK surgery)
-
@ThePeacent said:
oh, I sometimes have zip ties in the pouch too
those are eye drops (I had dry eyes for a while after the LASIK surgery)
Ah, ok
I was thinking superglue in vials that size would be great, but too easily opened accidentally. Artificial tears makes more sense. 
-
Patina. Its probably a whole topic unto itself. I agree that my usage and wear on any tool is nice to see. It wasn't so a while ago as I wanted my tools in their pristine condition. When I began my voyage of buying to try I got nearly all my tools used so they can with patina. Not a lot but no marks from me. That probably when I began my polish stage. I wanted to put the wear on the tool. Later I began to quite like the look of honest wear. Well, wear that appears to have been thru usage not abuse or neglect.
-
If this has been coveref already, please ignore. Have you tried cloth wheel(on bench grinder, drill or dremel) polishing to get the major imperfections out if the steel surface? Then using the Mesh to finish it off?
-
@gerleatherberman said:
If this has been coveref already, please ignore. Have you tried cloth wheel(on bench grinder, drill or dremel) polishing to get the major imperfections out if the steel surface? Then using the Mesh to finish it off?I haven't, to be honest, but if 600 grit wet and dry hasn't shifted it, I can't see a cloth/felt wheel fetching it out much quicker.

Scratching it with a pin (aren't Swiss knives great :D) I reckon they might be 4 to 6 thou deep in places. I'd probably be better off hitting the waterstones with them, if I wanted to get them perfect. I don't think it's worth that much effort though.
-
IMO. The cloth polishing wheels and compound are ideal for heavy polishing. Only downside is that it removes a lot of material to achieve the results. The SideClip would be fine I think, as the frame is very sturdy to begin with. I've polished out an entire Mr. Pinchy before with red compound and a 3400rpm 6" wheel. Only took an hour and it had those kind of pits and orange peel as well. Your MicroMesh pads as the last stage would give it a mirror-esque finish I think. If I hadn't gifted it to a friend(who fell in love with it for some reason), I'd snap some photos. :ahhh
I've never tried the wheels for drills or dremels for large polish jobs, but I assume the time taken would be considerably longer. But, and I don't immediately recall, several members have used them with success. Just something to look into. I'm not an expert with it, but I do know from my limited experience that hand polishing is arduous at best when the metal surface isn't good to start with.
-
@gerleatherberman said:
IMO. The cloth polishing wheels and compound are ideal for heavy polishing. Only downside is that it removes a lot of material to achieve the results. The SideClip would be fine I think, as the frame is very sturdy to begin with. I've polished out an entire Mr. Pinchy before with red compound and a 3400rpm 6" wheel. Only took an hour and it had those kind of pits and orange peel as well. Your MicroMesh pads as the last stage would give it a mirror-esque finish I think. If I hadn't gifted it to a friend(who fell in love with it for some reason), I'd snap some photos. :ahhhI've never tried the wheels for drills or dremels for large polish jobs, but I assume the time taken would be considerably longer. But, and I don't immediately recall, several members have used them with success. Just something to look into. I'm not an expert with it, but I do know from my limited experience that hand polishing is arduous at best when the metal surface isn't good to start with.
Sadly, a Dremel is all I have :-[ I do have a (slow) benchtop pillar drill, but again, I think I'd have my work cut out there. There's also the risk of dishing it and getting distorted reflections, which I think would look worse (more obvious) than a bit of minor residual pitting. Besides which, the first time I drop it, or dim wittedly put it in a pocket with something else metallic, it'll pick up a few new blemishes anyway :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login