Cull Update
-
I'll echo what the others have said, Nice kit. I figured we all had some kind of grab and go kit for times when visiting friends/family :D. While most items I just want to be a guest like the others, they know we carry tools so.......
I do have an actual bag of tools on my truck but most times a small kit like yours can solve a lot of issues.
-
@Aloha said:
I'll echo what the others have said, Nice kit. I figured we all had some kind of grab and go kit for times when visiting friends/family :D. While most items I just want to be a guest like the others, they know we carry tools so.......I do have an actual bag of tools on my truck but most times a small kit like yours can solve a lot of issues.
Absolutely!
I used to carry this kit (with a couple of subtle differences) in the smallest of the Maxpedition EDC pouches, and had it in my pocket when I visited some friends who had just moved into a new house three or four years ago. I went to use their bathroom, and when I tried to get out, the door handle came away, and the spindle dropped on the floor the other side.

I heard my friend shout "Oh, has it done it again?", and by the time she'd walked through and picked up the handle and spindle, I was already opening the door :D I fixed that, fixed a dodgy lightswitch, replaced a broken cupboard hinge, and sorted a couple of other things, just with that kit in my pocket. I did have some more stuff in the car, but never needed it.
When another friend moved house, it changed locks, fitted baby gates, harvested sticks for dowels for plugging the door frame where the hinge screws had pulled through... it's certainly paid for itself.
-
I mentioned when I posted the "formal" combo pic, that my intention was to polish up one of my Sideclips.
I've since gotten some Micromesh to do this with, but have noticed that the original brushed finish was hiding a multitude of sins. Even after giving the surface a good rub down with some 600 grit wet and dry, there's some significant "orange peeling" which would involve removing quite a bit of material to fully clear it (pic attached). As such, I might need to polish up both of them, and piece together the best components from each, if I want a flawless finish. ::)
I think that might be more work than I want to do though, so I might just polish this up as is, and tolerate a little residual "character". Nobody other than me would really know anyway. I just don't want to put all that effort in, and still not be happy with it though

Undecided....

-
I went down the uber polish hole for a brief moment. Man I got a little crazy. I polished a lot of tools that really didn't want to be polished. A Kershaw Leek for example was so slippery when all done that it was almost unusable. My Wave, some PSTs, certain SAK tools, a Swisstool ( yup ), and a lot of other things I dare not post
.I don't mind the character these days. Not sure whats changed? My Buck 110 is a great example. I got it in rough shape but stopped very short of removing the previous life it had. Cleaned it up just enough for my time with it and development of character.
Oh, but I'm still probably gonna get some micro mesh ;). I didn't say I was cured.
-
@Aloha said:
Oh, but I'm still probably gonna get some micro mesh ;). I didn't say I was cured.
Still early days for me, but first impressions are very good. 
I'm a bit odd with acquired character and natural patina (some would say I'm odd with a lot of things :P ), I don't mind it, so long as it's me that put it there. If this Sideclip gets scratched up a bit in use, no problem - but that orange peel finish in a couple of areas, wasn't my doing, or not necessarily acquired while it was with me. :-\ I really like the looks of older knives, so long as I got it new.
One of the reasons I wanted to cut back, was so my reduced array would see more pocket time, and start to look like faithful companions sooner. I wouldn't want to buy tools in that condition though, only take on that look from being a part of my life. Patina I put on has meaning, buying a "worn in" tool does not (for me). In five or ten years, I want my favourites to be obvious, purely because they'll reflect the days they spent with me. There's only three of my pocket knives that have acquired that look so far, but some of the multis and Swiss knives are starting to take on that look too.
-
@AimlessWanderer said:
Thanks TP. What else was lurking in the pouch? Do you have a pic of the full kit?H AW,
sorry but it was an opportunnity pic,
taken at the moment I was swapping items by chance, but the contents of it are most times:Crater C33
Pliers based multitool, full sized (such as Spirit, ST300, SOG Powerlock...)
Precise needlenose pliers multitool (such as Squirt, Juice, etc.)
Tweezers, full size and locking, and Nail Clipper
AAA Flashlight
Pencil
Pen
Band-Aids, Steri-Strips
Spare Battery
Tape, Paper Clips, Carabiner
Pocket Prybar with wrench
Lighter(s)
Utility Knife W/Replaceable blades
Bit Kit
OPT with several allen and screwdriver tipsI also have this small pouch, with different gear, which rides in the vehicle permanently



-
Thanks TP.

For some reason (not sure why, as they're not shown/listed) that reminded me to put some small cable ties in my kit. Now done.
Are they mini vials of Superglue in the first pic?
-
@AimlessWanderer said:
Thanks TP.
For some reason (not sure why, as they're not shown/listed) that reminded me to put some small cable ties in my kit. Now done.
Are they mini vials of Superglue in the first pic?
oh, I sometimes have zip ties in the pouch too

those are eye drops (I had dry eyes for a while after the LASIK surgery)
-
@ThePeacent said:
oh, I sometimes have zip ties in the pouch too
those are eye drops (I had dry eyes for a while after the LASIK surgery)
Ah, ok
I was thinking superglue in vials that size would be great, but too easily opened accidentally. Artificial tears makes more sense. 
-
Patina. Its probably a whole topic unto itself. I agree that my usage and wear on any tool is nice to see. It wasn't so a while ago as I wanted my tools in their pristine condition. When I began my voyage of buying to try I got nearly all my tools used so they can with patina. Not a lot but no marks from me. That probably when I began my polish stage. I wanted to put the wear on the tool. Later I began to quite like the look of honest wear. Well, wear that appears to have been thru usage not abuse or neglect.
-
If this has been coveref already, please ignore. Have you tried cloth wheel(on bench grinder, drill or dremel) polishing to get the major imperfections out if the steel surface? Then using the Mesh to finish it off?
-
@gerleatherberman said:
If this has been coveref already, please ignore. Have you tried cloth wheel(on bench grinder, drill or dremel) polishing to get the major imperfections out if the steel surface? Then using the Mesh to finish it off?I haven't, to be honest, but if 600 grit wet and dry hasn't shifted it, I can't see a cloth/felt wheel fetching it out much quicker.

Scratching it with a pin (aren't Swiss knives great :D) I reckon they might be 4 to 6 thou deep in places. I'd probably be better off hitting the waterstones with them, if I wanted to get them perfect. I don't think it's worth that much effort though.
-
IMO. The cloth polishing wheels and compound are ideal for heavy polishing. Only downside is that it removes a lot of material to achieve the results. The SideClip would be fine I think, as the frame is very sturdy to begin with. I've polished out an entire Mr. Pinchy before with red compound and a 3400rpm 6" wheel. Only took an hour and it had those kind of pits and orange peel as well. Your MicroMesh pads as the last stage would give it a mirror-esque finish I think. If I hadn't gifted it to a friend(who fell in love with it for some reason), I'd snap some photos. :ahhh
I've never tried the wheels for drills or dremels for large polish jobs, but I assume the time taken would be considerably longer. But, and I don't immediately recall, several members have used them with success. Just something to look into. I'm not an expert with it, but I do know from my limited experience that hand polishing is arduous at best when the metal surface isn't good to start with.
-
@gerleatherberman said:
IMO. The cloth polishing wheels and compound are ideal for heavy polishing. Only downside is that it removes a lot of material to achieve the results. The SideClip would be fine I think, as the frame is very sturdy to begin with. I've polished out an entire Mr. Pinchy before with red compound and a 3400rpm 6" wheel. Only took an hour and it had those kind of pits and orange peel as well. Your MicroMesh pads as the last stage would give it a mirror-esque finish I think. If I hadn't gifted it to a friend(who fell in love with it for some reason), I'd snap some photos. :ahhhI've never tried the wheels for drills or dremels for large polish jobs, but I assume the time taken would be considerably longer. But, and I don't immediately recall, several members have used them with success. Just something to look into. I'm not an expert with it, but I do know from my limited experience that hand polishing is arduous at best when the metal surface isn't good to start with.
Sadly, a Dremel is all I have :-[ I do have a (slow) benchtop pillar drill, but again, I think I'd have my work cut out there. There's also the risk of dishing it and getting distorted reflections, which I think would look worse (more obvious) than a bit of minor residual pitting. Besides which, the first time I drop it, or dim wittedly put it in a pocket with something else metallic, it'll pick up a few new blemishes anyway :D
-
I know what you mean. I hesitate to carry my beater tools after I remove scratches. Even knowing I could just remove the new scratches as easily. And also repolishing, knowing it'll be scratched anyway. Multitool paradox! :ahhh
:ahhh -
Light and time.
I've never been as adventurous in these areas. For many years, I didn't even own a working wrist watch. Today, have three watches for the wrist, two for the pocket (three if you count the Voyager Lite from earlier), and a fob watch for the belt. I'll talk a little about these next.
Aside from the lights that were included in the combos shown previously, there's not a lot lurking in the drawer. Of those, the Sunwayman V10R is the most carried. I'm surprised the dimmer switch concept hasn't become more popular. I think it's a perfect way to regulate brightness. A simple on/off switch and a twist ring. The headlamps and paclite come out for camping and such, but the others rarely come out to play these days. It's always nice having a couple of spares in the drawer though.
By far the most carried light of all though, aside from whatever happens to be on my keys at the time, is my rather beaten up Quark AA. I tend to keep this set up up with the two cell tube, but I do have a single cell tube for it too. This light is almost a permanent fixture in my pocket carry for 6 months of the year.



-
None of my watches are expensive. I've always bought a cheapie, use it till it breaks, chuck it, and buy another. If you total up the cost of all the watches that I've bought in my life, it wouldn't buy one luxury watch. For some reason, I'm happier to spend £50 on a knife than a watch.
Here's what I currently have.
A cheapo Sekonda chronograph. The chronograph function often malfunctions, with the hands not zeroing after use, but it holds reasonable time. Despite it's meagre cost, I've had a couple of watch enthusiasts go "oh that's nice, what's that?" when they've caught a casual glance of it, only to be told it costs less than a good night out. :D It's nice and easy to read too, which is a must for my gammy eyesight. I haven't worn it for ages though, and I need a new battery for it. I'll be doing that this month or next. Not a watch I wear often, but nice to have working when I'm in the mood for something a little more dressy than my plastic cased regular wear.
The Casio AO-S800W was cheap, and my first solar watch. Heinnie had it on sale, and it's been a good set it and forget it watch. It's a nice light watch, which doesn't snag of cuffs and pockets, and cheap enough that I won't get upset if I mangle it.
The G-Shock AWG-M100 was something I traded a couple of tools for on here. I'd never pay that much for a semi-digital watch, and have only ever paid that much for one watch in my entire life, but I had a couple of spare tools to weigh in for it. I love it. Looks good, handles my frequent arguements with gravity very well, and maintenance consists of leaving it on the windowsill for a day or two, while I wear something else. That's the level of maintenance I like in a watch :D



-
If I'm going to wear a pocket watch, most times it will be the cheapo stainless cased Sekonda quartz. I don't mind giving that a hard time. The dial is nice and clear, and the half hunter case actually functions as a low level magnifier, for when I don't have any other mag glass of fresnel lens on me. I need to take this to get a new battery fitted. I can get the back off, but my eyesight isn't good enough to remove the stem to access the on battery.
The gold Rotary mechanical only comes out on events where I'm in black tie, or otherwise dressed quite formally. This was my most expensive watch ever, and is still pretty cheap. It's not a Swiss mechanism, but doesn't need to be. It needs to be accurate for one day every few years, and handles that just fine :D
The fob watch was cheap, very cheap, and has had some serious abuse. It was the only watch I'd wear (on a belt loop) when I was working in heavy engineering, and was handled with oily hands, bashed around, dropped, and still always gave me the time. I'll be getting a battery for this soon too. For the last couple of years, all I've worn has been has been my plastic fantastics. It's got quite a bit of wear on it now, but I don't mind that at all.
So nothing "exciting" on the watch front, but that's how I like it. While i've never minded paying for a decent pocket knife, when it comes to watches, I stick at the Rough Rider end of the spectrum, but lets be honest, they do some decent pocket knives too.




-
@gerleatherberman said:
I know what you mean. I hesitate to carry my beater tools after I remove scratches. Even knowing I could just remove the new scratches as easily. And also repolishing, knowing it'll be scratched anyway. Multitool paradox! :ahhh
:ahhh:D
That won't bother me too much. I just want one of the Sideclips to look shinier than a brushed finish, even if it does have some signs of being a working tool. I'll persevere with the 600 grit and micromesh, and see what I end up with

-

Looking forward to the results, AW!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login