Gerber Flik revival
-
The pliers mechanism on my Filk was broken for quite some time. Did contacted Gerber but this is apparently discontinued. Worked something out to bring this oddball back to life. Not that I will be using it, but I think its pretty enough to earn a place on the shelf. ;) Fully functional, pliers lock, open and close without problems. For Flik fans. But not many I suppose. :P :P



-
Nice work.
I wonder if MP 400 pliers would maybe retract further without being too rattly.
-
Nice work around Sam
I have always liked the looked of the Flik and have looked at them several times over the years to buy and never found one at the price point I wanted, so never have gotten one
:o -
The pawl mechanism on the pliers was very weak on the Flik. It's a shame really, as it could have been a very good tool if they'd have refined the design and built it properly. I never tried a Freehand
-
@AimlessWanderer said:
The pawl mechanism on the pliers was very weak on the Flik. It's a shame really, as it could have been a very good tool if they'd have refined the design and built it properly. I never tried a FreehandThat mechanism is really complicated. I still can't figure how it's works.
anyhow, what you said is correct. The idea of outside oho tools with flickable pliers is great. But this design had too many weak spots. Even the locking area around the 4 oho tools are poorly thought out and fragilely built. Pretty sad to say, this tool had too many flaws. -
Sam,
The Flik plier system is dependant on the little coil spring. If the spring isn't broken, you can fix the mechanism. I repaired the head on my Flik by simply moving the bent end of the coil spring passed the plate that rides inside the channel. Only issue is getting it bacl together holding the spring in place. That is why the Flik stops operating properly sometimes when it is disassembled.
There is a rocker that sits in each side that is tensioned by the spring, and there is a fixed piece with a tooth and valley. When the pliers are pulled out, it is all still static. And when you open the handles to deploy the pliers, the rockers move into the fixed piece. The release buttons push the rockers out of the valley in the fixed piece. It is all very dependant on the coil spring. Also, and this is very important, the tightness of the mounting screws can cause mechanism to stop working properly. Overtightening will cause the rocker to stop moving freely.
Simple, right? :ahhh -
@gerleatherberman said:
Sam,The Flik plier system is dependant on the little coil spring. If the spring isn't broken, you can fix the mechanism. I repaired the head on my Flik by simply moving the bent end of the coil spring passed the plate that rides inside the channel. Only issue is getting it bacl together holding the spring in place. That is why the Flik stops operating properly sometimes when it is disassembled.
There is a rocker that sits in each side that is tensioned by the spring, and there is a fixed piece with a tooth and valley. When the pliers are pulled out, it is all still static. And when you open the handles to deploy the pliers, the rockers move into the fixed piece. The release buttons push the rockers out of the valley in the fixed piece. It is all very dependant on the coil spring. Also, and this is very important, the tightness of the mounting screws can cause mechanism to stop working properly. Overtightening will cause the rocker to stop moving freely.
Simple, right? :ahhhSimply in-understandable.

Anyway the failure on mine I remember was cause by the popped rivet on one side. That side "simply" fell apart. I couldn't peen it back.. It seems too short in the very first place. :ahhh
-
You're right. The pins, in the best case, seem recessed in the holes they sit in.

-
@Sam Lim said:
The pawl mechanism on the pliers was very weak on the Flik. It's a shame really, as it could have been a very good tool if they'd have refined the design and built it properly. I never tried a Freehand
That mechanism is really complicated. I still can't figure how it's works.
anyhow, what you said is correct. The idea of outside oho tools with flickable pliers is great. But this design had too many weak spots. Even the locking area around the 4 oho tools are poorly thought out and fragilely built. Pretty sad to say, this tool had too many flaws.I covered this in another thread a few years ago, which Photobucket probably killed. The problem is that the two pawl pieces in each arm, were stamped from too thin a material, which is why they had to pair them up. Unfortunately, this also meant they could crab on the pivot. Had they been made in one thicker piece of material (which would have ruled out stamping, so they would have had to cast it, or produce by some other method), the whole assembly would have been a lot stronger and more reliable.
-
Thank you 50 and GLBM for the explanations.

Not foreseeing myself choosing it as a user, it found a permanently lot beside its siblings.


-
By the way, Sam, love the 600 pliers in the Flik. Very cool.

-
@gerleatherberman said:
By the way, Sam, love the 600 pliers in the Flik. Very cool.

Definitely. A tested and fail proof design. Simple is best. -
@Sam Lim said:

Definitely. A tested and fail proof design. Simple is best.I bet the Flik would have sold better with that configuration. I watched a youtube video a long while ago where someone didn't even realize the pliers needed to be engaged. Imagine how crappy it would to be to use like that.

-
@Sam Lim said:

Definitely. A tested and fail proof design. Simple is best.I bet the Flik would have sold better with that configuration. I watched a youtube video a long while ago where someone didn't even realize the pliers needed to be engaged. Imagine how crappy it would to be to use like that.

Very crappy! I nicknamed mine the Flik & Poke, as you had to prod the latching pawl with your finger to get it to engage
-
In the poor Flik's defence; I carried it as my main MT in my job as a maintenance engineer for a long time and never had a serious issue and certainly never with the pliers. Not to say the design can't have problems, but I used mine pretty hard and they still work perfectly. I do like the revival job though.

-
@AimlessWanderer said:
Very crappy! I nicknamed mine the Flik & Poke, as you had to prod the latching pawl with your finger to get it to engage
One of my Freehands came with the issue. I loosened one of the slider screws(lower) and it started working properly. Not saying that would work on another one, but it did do the trick on the Freehand. :ahhh@Gareth said:
In the poor Flik's defence; I carried it as my main MT in my job as a maintenance engineer for a long time and never had a serious issue and certainly never with the pliers. Not to say the design can't have problems, but I used mine pretty hard and they still work perfectly. I do like the revival job though.
I can't say any of mine have severely failed either. One of my Fliks got carry time and still works flawlessly. The one I worked on was purchased as a dud. It worked great until I broke it down for parts. :ahhh
Wish I hadn't taken it apart for parts now, but I did get the saw and phillips in an MP600. The saw required a special bushing I made and the phillips was a minor grind and drop-in. The Flik tool pivot is odd, as the center pin is standard Gerber size pivot, but the screws act as pivots for the outboard tools, which have a larger pivot size.
-
@Gareth said:
In the poor Flik's defence; I carried it as my main MT in my job as a maintenance engineer for a long time and never had a serious issue and certainly never with the pliers. Not to say the design can't have problems, but I used mine pretty hard and they still work perfectly. I do like the revival job though.
Was at first concerned the 2 pivots wouldn't align and screw up the opening and closing. Pretty glad they worked out.

-
I am glad to see someone reviving the Flik. It's an odd model and those pawls just complicated things, but I have to say that it was, at one time one of my favorites, despite it's oddities.

Now mostly I don't carry it simply because if it was lost or damaged I'd be up a certain creed with no means of conveyance.

Def
-
@Grant Lamontagne said:
I am glad to see someone reviving the Flik. It's an odd model and those pawls just complicated things, but I have to say that it was, at one time one of my favorites, despite it's oddities.
Now mostly I don't carry it simply because if it was lost or damaged I'd be up a certain creed with no means of conveyance.

Def
it sure is an odd ball. Heavy tool with oddly short and too cute implements. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




