Micromesh
-
I've never used it, but I know there is a good following, I usually use a automotive scratch remover followed by a polishing compound and then a fine wax.
-
Just a quick FYI as well, I use micromesh quite alot when turning pens in the minute amount of spare time I sometimes get... Always make sure you work up the grits order. I find it makes a big difference if you miss one out for example and makes it more difficult to work out the micro scratches.
I've had a set for about 5 years and periodically soak and wash them in hot water and they come out like new. -
@kamakiri said:
You're welcome, Matt. I should also thank Kirk and Fred...I've had these products on my wish list for a while and this thread and Fred's reply led me to pull the trigger the other day. So thank you, both!

This is the only pic I took yesterday. I didn't take progress pics since I don't always like handling my phone while I'm working. I'll take some for this thread when I tackle a front scale and have the sheet material in hand.

I think I'll order a small set

-
@craggus2000 said:
Just a quick FYI as well, I use micromesh quite alot when turning pens in the minute amount of spare time I sometimes get... Always make sure you work up the grits order. I find it makes a big difference if you miss one out for example and makes it more difficult to work out the micro scratches.
I've had a set for about 5 years and periodically soak and wash them in hot water and they come out like new.Thanks craggus, very good

-
What a good thread. I know there are those that like to give their scales a refresh. While I have used wet/dry sand paper with good results I will have a look at this product.

-
I had a spare 10 mins this afternoon so decided to give the micro mesh a go on an old set of (hollow) scales.
Take a look at the result! The bottom set are a brand new unused set as they came from the packet. And at the top is one I've just used micro mesh on along with a comparison of what it was like before
10 mins, minimal effort, job done!
Just a bit of glue to keep them on and you'd hardly know they were used!

-
Yeah, I'm really liking the 8000 and 12000. For anyone new to polishing, you can't really smurf up in a bad way if you start with those two.
These two alone are cutting my polishing time to about 1/3. Very happy so far with how long it's lasting too. Worth the money.
-
@craggus2000 said:
I had a spare 10 mins this afternoon so decided to give the micro mesh a go on an old set of (hollow) scales.
Take a look at the result! The bottom set are a brand new unused set as they came from the packet. And at the top is one I've just used micro mesh on along with a comparison of what it was like before
10 mins, minimal effort, job done!
Just a bit of glue to keep them on and you'd hardly know they were used!
Wow Craggus, what a result :o

-
@kamakiri said:
Yeah, I'm really liking the 8000 and 12000. For anyone new to polishing, you can't really smurf up in a bad way if you start with those two.These two alone are cutting my polishing time to about 1/3. Very happy so far with how long it's lasting too. Worth the money.
Thanks Grant for your advice

-
Great follow up and well done

-
Thanks for this thread, guys

Just received my second batch of micromesh today. I already had 6 regular sheets (6" x 3") from 3200 to 12000 for soft materials, and now have 9 MX sheets from 150 to 1200 for hard materials. I think some of my items are going to get a lot more shiny over the coming months. One Sideclip is already disassembled :D
-
. I had pretty good results from wet/dry sand paper up to 2000. The micro mesh looks like its next level. -
@Aloha said:
. I had pretty good results from wet/dry sand paper up to 2000. The micro mesh looks like its next level.Agreed. I also used 2500 and the 3000 I mentioned earlier. 'Next level' is a good way to put it.
Pads are great when you want to reduce or remove curvature (flatten surface), and the sheet material is great if you want to follow or retain curvature.
@MTMatt said:
Thanks Grant for your advice
You're welcome, Matt!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login