RescueTool
-
Victorinox Swiss Army Knife 111 mm RescueTool
This is my second 111 mm SAK (OHT) and I really do like this size. I have no problem with in-pocket carry with their stream lines and good quality.
Now I don't have a scrap car to do a proper review but until the Mods come over
First; Visual impression, the way it looks:
Is this visible! From the Stay Glow Scales, to the bright red pouch and neon-yellow trim (any clown would be proud). It would be hard to miss this lying around, whether sitting on something, laying on the ground(oops) or on yourself, I like that, it is for rescue and emergencies! Whatever Vic uses for their Stay Glows they work really nice. In this size you can just about read at night when fully charged, more like Stay BRIGHTS! and they do last for hours. The tool itself looks well put together, 4 layers, excellent finish, same ole Swiss goodness. It comes with a short chord/lanyard that helps in retrieving it from the pouch, your pocket or some other place where you may need to grab it fast (or dangle it in front of someone "You are now in Swiss Heaven").

The Tools inside:
Main Blade; reminds me of a modified sheeps foot or spear point, easy to open with one hand, locks, tip to more than half way serrations, and a very sharp plain edge on the rest, and mine is razor sharp (don't shut it on your finger!), one side grind, good size overal.

SeatBelt Cutter; non-locking. I don't have any belts to cut/test on! but I've read it works fine.

Disc Saw; why is it called that? it's not a disc! removeable, probably to replace when worn and hopefully for other future tools/accesories. Reminds me of the wood saw but with thicker, single-line-teeth, made for cutting glass on the pull stroke. non-locking. untested by me.

Strong 6mm Crate Opener/Flathead driver/Bottle opener/wirestripper; good ole multi-use tool. Locks in full open, non-locking in 90 degrees

Glass Breaker; removeable, and it comes mounted in the front of the tool. It has a 4 sided thick-point to smash glass, looks like it'll work, but untested by me.


On Back;
-Awl/punch/reamer; no eye hole (no sowing while saving lives I guess). mine is tight (as many back sak impliments are) and it is nice and sharp on the one side and good and pointy.
-Phillips Screwdriver; nicely cut, works good.

On Scales;
-Tweezers and Toothpick; I know I miss these little tools when their gone (cough alox).
Lanyard Ring; their standard setup, it does the job.I really like this SAK, it will be in my car, somewhere I can get at it. It would have been nice to have the "pin/needle" behind the phillips, plenty of room. You need to have it out of the case in light to recharge (glow) but aside for those minor things, an excellent, thought out, smart designed tool, good job Vic

-
-
Great review mate
, and awesome pics as ever too 
Bob's got a knackered old truck to do some proper testing on

-
-
@WhichDawg said:
thx guys. I just saw a couple of mistakes! ::)
(fixed)Well I never noticed them

-
-
Nicely written and illustrated Dubya Dee!

Some day I'm going to have to buy one of those. Questions:
-
How easy/difficult is it to pop off the replaceable glass saw and glass breaker? Might they fall off accidentally?
-
Have you tried one hand opening the seat belt cutter? I saw a video on the Vic site that shows a guy catching that little tab on his pant leg or something and flicking the blade out only using one hand.
-
-
they are very hard to remove by hand, I've tried, no luck.
the belt cutter and disc saw do have really nice "extended" tabs and I just tried it,
the belt cutter pops out easy with one hand, against something but the disc saw's
tab is blocked by the glass breaker attachment.
-
@J-sews said:
Nicely written and illustrated Dubya Dee!
Some day I'm going to have to buy one of those. Questions:
-
How easy/difficult is it to pop off the replaceable glass saw and glass breaker? Might they fall off accidentally?
-
Have you tried one hand opening the seat belt cutter? I saw a video on the Vic site that shows a guy catching that little tab on his pant leg or something and flicking the blade out only using one hand.
Funny, I'm pretty certain I saw that on SOSAKOnline!

Def
-
-
@Defender said:
Nicely written and illustrated Dubya Dee!

Some day I'm going to have to buy one of those. Questions:
-
How easy/difficult is it to pop off the replaceable glass saw and glass breaker? Might they fall off accidentally?
-
Have you tried one hand opening the seat belt cutter? I saw a video on the Vic site that shows a guy catching that little tab on his pant leg or something and flicking the blade out only using one hand.
Funny, I'm pretty certain I saw that on SOSAKOnline!

Def
Oh yeah...yeah, that's what I meant...

-
-
Nice review WD
Looks like a very capable knife
and great pics as well ::) 
-
@Defender said:
Nicely written and illustrated Dubya Dee!

Some day I'm going to have to buy one of those. Questions:
-
How easy/difficult is it to pop off the replaceable glass saw and glass breaker? Might they fall off accidentally?
-
Have you tried one hand opening the seat belt cutter? I saw a video on the Vic site that shows a guy catching that little tab on his pant leg or something and flicking the blade out only using one hand.
Funny, I'm pretty certain I saw that on SOSAKOnline!

Def
maybe it's really important for Bob!
I find unless you take off the Glass Breaker, it gets in the way of catching a tab/end of the Disc Saw;

it is possible with it on, but not so easy. -
-
Ahh! Nice picture. I had not seen it shown that way before.
-
Great review
And smashing pics
A very capable knife and one of my favourites 
Dunc
-
-
-
-
-
-
Hi Guys
Don't see much talk on this forum on the Vic rescue Tool - Or at least I missed it all !!
I was very thrilled to receive one of these for my birthday on Tuesday - From my other half - maybe she does understand my affliction after all !!
I had a couple of questions/observations.
[list type=decimal]-
Why is the 'disc cutter' called a disc cutter? It's a **saw ** for cutting laminated windscreen glass - So why 'disc cutter' ? ???
-
The main blade is the same as the Soldier and is partially serrated - Puzzled as to why they put in a partially serrated blade - When the knife already has a very sharp and good serrated blade in the seat belt cutter.
Any ideas anyone?
OK so the blade is slightly convex with a blunt tip - But works well as a serrated blade. It looks similar to the Vic gutting blades. To me a PE would be better. Eg The serrated edge got caught, even opening my birthday cards!!
Overall impression is - I like the knife - I understand it was developed by Vic in conjunction with the Swiss Fire Service - so it is very speSmurfpillsed.
As such - with its tools set - I do not see it as an EDC for weekdays or weekends (eg backpacking)- For example the saw (disc cutter) does not work on wood.
So will keep it in the car - and hope I never have to use it for its intended use.
PS. If I was a fireman or paramedic - I would love the tool !!

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login