Making a multitool from scratch
-
I would think that you could bend the metal and then harden it. I would see about making some kind of bending jig to be sure that you get both sides the same.
Sent from my G8441 using Tapatalk
-
As with many things in life: It depends..
What tools you need is connected to kind of style, design, quality, precision and finish are you aiming for? And as there are often many ways to the same end goal - your skills and how much time you are willing to put in are big factors too. Is is a one-off or do you want to make more than one?
If you are going to use a vise, and aim for a even bend with flat surfaces to each side, then a bending jig is the easiest way there. There are both commercial versions diy models out there. You likely want two bends close to each other though, so make sure those jigs can do that. (Instead of a vise you might want to look to a press. Edit: Or adapt press style tooling to a vise).
If you plan on using stainless steel you should be aware that most will work harden very quickly. Thus avoid repeated bending back and forth to adjust or it will become very hard and brittle in the bend.
Drill any holes that need to match up after the bending. Drilling the plate first and then doing the bending to make them match up is much more difficult. I would think same goes for the edges.
On a more general note bending handles in a traditional straight design is unlikely to be your biggest issue. I think you'll find making the plier heads more challenging.
-
Then making a double/triple sided file by hand.

-
@comis said:
Making your own plier heads? :o I could only imagine how difficult that would be...
He did say from skratch, and I guess a plier based multitool has to include some plier heads?
Casting, forging, machining, reaming, grinding, pressing, induction heat treat - some ways and plenty of excuses for more tools just with the plier heads. :D@gerleatherberman said:
Then making a double/triple sided file by hand.
One day I hope to try out electroless nickel diamond plating. Which seems to be the best solution for files.
(My tungsten file project ended up with a major sideturn. I guess I got the wrong kind of powder from the factory as I seem to have melted some cobolt binder in it. I basically covered the steel surface in tungsten carbide instead of sinking tungsten grains into the steel. Still a very interesting result - that material is silly hard!).
-
Well yeah, the file would be almost impossible. As for the pliers, I was thinking maybe grinding down a pair of combo pliers to 10mm of total thickness, but that would probably make the rivet too weak.
Anyways, I don't know if I'll ever try this, since my dream multitool is just a slightly different, more robust Swisstool. And because of the patents, i would just make one for myself, if I ever get down to it!
-
3D software, a 3 or 4 axis milling machine, a lathe, a saw and a drill station, a few grinders (belt, table and wheel), an oven, a quench, tooling for all equipment and bunch of hand tools and measuring tools. Also a whole lot of time to learn how to use all software, machinery, and equipment.
It will probably cost you over 10 grand for everything, and a few years familiarize yourself on how to use everything including trial and error. Count multiple years to reach expert level. Then you still have to design and iterate the multitool until you have a version that is worthwhile to manufacture. -
@nostromo said:
Well yeah, the file would be almost impossible.Normal steel files are not impossible, but I much prefer the diamond ones.
@nostromo said:
As for the pliers, I was thinking maybe grinding down a pair of combo pliers to 10mm of total thickness, but that would probably make the rivet too weak.That is the nice thing - lots of various multi-tools and plier heads around. Not to mention normal pliers, which generally are better too. You might find something suitable and build from there?
@nostromo said:
Anyways, I don't know if I'll ever try this, since my dream multitool is just a slightly different, more robust Swisstool. And because of the patents, i would just make one for myself, if I ever get down to it!Sounds like you might be able to adopt a lot from the Swisstool then?
They did make multi-tool back in Roman times too, so things can be done without all modern stuff too. You might want modern finish and quality though. :)
-
Hobby lathe, hobby milling machine, hobby forge, hobby casting setup... expensive and difficult. My brother dabbled in blacksmithing, it was very involved.
Charles.
-
There is surprisingly little use for a lathe, and few if any multi-tools have any traditionally forged parts. And while casting is a very flexible process the casting of stainless steel (with consistent strong results) is beyond most hobbyists. The temperature of some 1650C (3000F) requires special equipment and the casting environment need protection from oxygen. But one can design around the need for casted parts.
For a Leatherman style multi-tool then you can go a very long way with a 2D drawing or CAD program, some external 2D cutting service (or lots of patience and a jewelers or coping saw), some way for you to grind, rivet and braze or weld, and an external heat treater. Check out the Ganzo 3xx something tools for instance - basically all 2D blanked parts welded and riveted together. Many are like that, and they work.
The plier head is easiest to just get off something. If you need to make a one off an external wire-EDM company might be able to help with a one off - at a cost.
-
@nostromo said:
Well yeah, the file would be almost impossible. As for the pliers, I was thinking maybe grinding down a pair of combo pliers to 10mm of total thickness, but that would probably make the rivet too weak.Anyways, I don't know if I'll ever try this, since my dream multitool is just a slightly different, more robust Swisstool. And because of the patents, i would just make one for myself, if I ever get down to it!
the file is actually quite simple in theory.
get a checqering file of whatever tpi [i would use a fine file,since this would be for a multitool proect].
you will have to use a hardenable steel,01 or D2 maybe.
file the desired cut,harden,temper,presto! easy peasy :D
this is obviously for a custom project -
@nostromo said:
Well yeah, the file would be almost impossible. As for the pliers, I was thinking maybe grinding down a pair of combo pliers to 10mm of total thickness, but that would probably make the rivet too weak.Anyways, I don't know if I'll ever try this, since my dream multitool is just a slightly different, more robust Swisstool. And because of the patents, i would just make one for myself, if I ever get down to it!
The file wouldn't be that difficult, easier than the pliers imo. You would take your blank file in it's annealed state, use some sort of custom ground tool to hammer the teeth into the blank. After your done, heat treat it.
Clickspring has a great video on this
https://youtu.be/SOw9WqMOHjA -
@386greene said:
The file wouldn't be that difficult, easier than the pliers imo. You would take your blank file in it's annealed state, use some sort of custom ground tool to hammer the teeth into the blank. After your done, heat treat it.Clickspring has a great video on this
https://youtu.be/SOw9WqMOHjAOne of my new favorite channels on youtube. Thanks!

-
Well it would take some time to create MT from scratch, already file making seems like a quite long process [emoji16] Pliers and scissors I could think are not easy either. But sure would be nice to do. Maybe blade and some drivers tool would be easiest to start with. Some sort of spring for opening and closing the tools.
-
You mean something like this?
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login