Early Gerbers
-
@lonediver said:
Hmmmm,I think that I will have to disagree with this . In gerbers rush to bring to market thier first multiplier the nail nicks on the outside blades faced toward the center of the handles as well as being forward of where the nail notches on the handles were located . A very obviious blunder . As well as this tool earning a reputation of being a palm pincher . I cannot believe that they spent much time testing this tool in R & D . Fortunately thier tool and quality has improved somewhat But thier first tool was poor too say the least . ( I still own one as it is a nice collectable But it is poor )
The blades being fitted the wrong way is an assembly fault by wherever it was assembled and should have been picked up by the QC. The finger nipping was something that should have been foreseen if they had used the right people to test the product on but I can bet with that sliding mechanism they were guarded as to who handled those first tools till patents were at least in the process of being registered, so I guess it was only handled by pen pushers rather than future users. They also probably only designed cutlery before so they had to find out what the testing procedure would have to be and include.
Can I ask a favour? If you have not changed the blades round so the finger nicks are still wrong could you put a photo up in the <The Gerber ttthat bit> thread in the review section so it can be compared with the one I got here in the UK probably a year after you got yours (we always seem to get the new stuff a year or so after you guys.) :'(Dave
-
@lonediver said:
The first multiplier did not have the slide locks , rather it simply had spring tension as the original PST . It was also the only multiplier model to have a polished finish .Yes, sorry I should have been more precise, I meant the way the plier head slid out and locked with the sprung center pin. When it arrived over here they had changed the finish to bead blast but it still had the slip lock for the handle tools.
One fault I had a couple of times was the front one of the three pins dropping down the hole made for the center pin if someone attempted to use it with the head not being properly locked. They cured that with the big circlip on the MP600 and I guess the MP400 but I have never had an interest in that model.Dave
-
Here's a picture of several Gerber tools, specifically the plier slide locks. Early tools on the left, current 400 and 600 series tools on the right.

-
Here's a picture of the First Production Run Gerber that lonediver was referring to. I must agree, it seems as if this tool was rushed to the marketplace a bit too quickly. In addition to the nail nick blunder, there was also the crudely made scissors tool.
However, I forgive Gerber for the shortcomings of this tool. It was their first multitool, it was a long time ago, and not many of these "got out" into the public before improvements were made.


-
Thanks Bob, now I can fully understand what lonedivers complaint was.
The first one I bought was the one I wrote about in the <The Gerber tthat bit> thread. It came with a tool kit that was built into a flap that press studded on the pouch, I loaned it out and than realized I needed it, Quick. As I would not see the guy I loaned it to for over a week and it was before mobile phones so I could not arrange anything. I knew I could get one delivered next day so I bought one without the tool kit. That's why I ended up with 2. The new one was given to my eldest son when the loaned one came back, my youngest son got the other when I bought the MP600.
I have no way of knowing if the first was ever over here but at the time I was told that "Gerber had just brought out a multitool that seemed to be more suitable for one hand use" (I can not see the point of paying all that money for a tool that replaces three to five small dedicated tools that can all be put in your rear jeans pocket and used with one hand if you have to take your hand off a ladder just to open it) so I took that to mean it was the first of its kind. Of course the in handle tools had to be opened before going up the ladder but it was usable. When they brought their sliding lock mechanism out the tool was fully one handed if you loosened it up a bit.
Do you have any idea were they stood in actual the history of this tool? I haven't a clue how old they are, they were something I just used till I got a MP600.Dave
-
I don't know precisely when Gerber entered the multitool business, but their sliding jaw design was patented in 1992. (Filed in 1991.)
Here is a scan of the first page of that patent. Note the references to Leatherman, and the assignee being Fiskars of Finland, which owns Gerber.
-
By that diagram it looks as though they did not intend to have cut-out in the handles so having the nail nicks on the inside becomes a little bit more understandable. I wonder why they put the cutouts in the handles, looks a lot stronger with the plain handle and the ruler would have a flat edge to it.
That hinge on the handle looks interesting I wonder if any of those reached the market?Dave
-
I bought my first Gerber in the '80's I'm sure - the pinchy one.
-
Yah, that's weird. I think I bought my first SOG - the weird sideways folding one - in the '80's too. Does that sound right?
-
The SOG Paratool was out when I enquired about a one hand opening tool and was told about the Gerber. I can not remember dates but I seem to have had the Gerber forever. ;)
Dave
-
Here's Spencer Frazer's SOG ParaTool patent. It was filed in 1992, then issued in 1993.
-
I have just had a look at the Gerber site in the "60 Fearless Years" page
http://www.gerbergear.com/history.php
They state "1991 — Gerber introduces the Multi-Plier. Two years later, it's among our best selling products."
In a write up on Spencer Frazer on the SOG site.
http://www.sogknives.com/about/spencer/index.php
SOG states "We were the second company to produce a folding multi-tool with the Paratool. We are the only company: to use compound leverage in our multi-tools (the only way to miniaturize power),"
There are no dates though. Given the yard stick that LM is the self proclaimed first multi-tool, SOG being the second then I guess the rest including Gerber. That sounds right because I phoned to enquire about the Paratool and was told about the 'new' Gerber.Dave
-
I honestly cannot remember when I first became aware of Gerber's MultiPlier. The first one I owned is similar to Damota's pinchy one. It was only years later that I stumbled upon the shiny polished "First Production Run" model.
By the way, they also produced that first model with a black oxide finish. (Note the wrong-side nail nicks, crude scissors, and extra bushing where the pliers pivot.)

-
This is my first Gerber. I guess they had worked out the nail nicks by this one. I wrecked this blade on an electric sharpener.
-
Gerber continuously evolved their Multiplier, making slight changes here and there. I sort of came up with five different distinct series between the First Production Run model posted earlier up until they totally redesigned everything with the 600 series Multi-Lock.
Tom,
I like to call the one you pictured a Series 2. It still has the extra plier pivot bushing, and all of the screws are still round button-heads.But the finish went from highly polished to matte bead-blasted, and the scissors were replaced by the triangular awl blade.
~Bob

-
@lonediver said:
Dang , I missed getting that one . Is this another that I will have to get over your dead body Bob ?Hah! Sorry, I've asked in my will to be buried with it. :P
-
@J-sews said:
I don't know precisely when Gerber entered the multitool business, but their sliding jaw design was patented in 1992. (Filed in 1991.)Here is a scan of the first page of that patent. Note the references to Leatherman, and the assignee being Fiskars of Finland, which owns Gerber.
i found this and i remember that at 92 or 93 i was at fiskrs knifeshops,buyin stuff and i was already buyin the knife ben has now and the owner of shop,"peltonen himself" offered some cobined deal of knife and that first model gerber,and i was out of funds so i picked up the knife only,but man did i drool that multitool,cause i had only seen once or twice,add´s of pst,never seen one,and gerber seemed so modern compared to Lm.at year 96,i was in army and then i had pst,supertooll and first model gerber mt like it the pic of j-sews.they all served me well,although the gerbers rattle was bit annoyin when we ran in bushes with it gerber attched to my chest rig.they all served me well,but after army i gave it to my big nro(rip)and i think his widow now has it but i aint goin to harass her,and ask it back since it sure has more sentimental value to her than to me.
-
Sorry to hear that mate :(
-
hey thats life

the gerber was somethin much better made than some of the recent ones,although i haven handled all moderr ones but i think so anyway.

-
Well the Diesel and the MP600 series are still quality tool's, the other one's I'm less keen on :-\
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login