Corkscrew Uses?
-
Ive been scratching my head for a few days, trying to not to bother you guys...but Im perplexed.
I see how popular the huntsman seems to be, which includes the corkscrew. I, however, am leaning towards the Fieldmaster. From what I can tell, they are the same besides the philips head on FM and corkscrew on HM. Is this accurate or did I miss something?
I did notice FM only has red (which is fine, I want red) and HM has a ton of different other colors/patterns.
So I guess my real question is what uses do you guys use for the corkscrew? Im not a wine drinker, so unless theres other uses, Id have to go with FM.
Thanks in advance

-
Have seen on you tube people screw it into a 4-5' long stick, extend the saw and use it to trim branches. screw it into a plastic wall anchor to remove it from wall. screw into corn for holder. untie knots. drill out the end of stick to make whistle or something, think that Felix Immler has a few vids with that
-
I use it a lot for untying knots. The awl works for that too but will shred the string at which point you might as well cut it.
-
Phillips driver, you could still try to use the can opener tip to make do. But I lean towards the corkscrew because it is a tool that has no replacement, and it is a total party pooper when it is missing. Besides all those uses mentioned, it also host the small screwdriver which comes in handy quite often for me.
Btw, if does become a dilemma for you one day, do check out a mod I made in the past--"Mountain Tinker" :D
-
I've been back and forth on this myself. I carried a Huntsman exclusively for decades and found the corkscrew really useful for knots, etc. I prefer the Explorer setup, with the inline Philips head and the corkscrew. I know you can't get quite as much torque from the inline Philips, but there's nothing out there to replace a corkscrew.
-
Untying knots, removing wall anchors, opening (pickle) jars, and carrying the mini screwdriver. Those are my main uses

-
@Barry Rowland said:
I've been back and forth on this myself. I carried a Huntsman exclusively for decades and found the corkscrew really useful for knots, etc. I prefer the Explorer setup, with the inline Philips head and the corkscrew. I know you can't get quite as much torque from the inline Philips, but there's nothing out there to replace a corkscrew.Just wanted to mention, you can get more torque from the inline Philips, not less.
Because the other Philips can't take much torque before it fails. -
As a glasses wearer, I find the corkscrew useful for holding the mini-screwdriver which has helped prevent a few spec disasters in the past!
-
@comis said:
Phillips driver, you could still try to use the can opener tip to make do. But I lean towards the corkscrew because it is a tool that has no replacement, and it is a total party pooper when it is missing. Besides all those uses mentioned, it also host the small screwdriver which comes in handy quite often for me.Btw, if does become a dilemma for you one day, do check out a mod I made in the past--"Mountain Tinker" :D
Great mod there! I like it! Having both is way better! Well done!

-
The difference between the Fieldmaster has phillips and Huntsman has the corkscrew all other tools are the same. The Huntsman does come in a lot of flavors ( scales ) as it a really popular model.
I was hardcore believer that the backside phillips was better to have than the corkscrew. I now believe the inline is the best and so the corkscrew is a nice complimentary tool for any SAK. The can opener is underrated and not talked about as much as it should as good phillips driver but its terrific.
The uses noted about are some good ones. I dont get a lot of use from it but I've used it to pull wall anchors which was super cool. I've used it to untie knots. I used it when a friend had wine but forgot the corkscrew. I always house the mini driver there.
-
@Aloha said:
The difference between the Fieldmaster has phillips and Huntsman has the corkscrew all other tools are the same. The Huntsman does come in a lot of flavors ( scales ) as it a really popular model.I was hardcore believer that the backside phillips was better to have than the corkscrew. I now believe the inline is the best and so the corkscrew is a nice complimentary tool for any SAK. The can opener is underrated and not talked about as much as it should as good phillips driver but its terrific.
The uses noted about are some good ones. I dont get a lot of use from it but I've used it to pull wall anchors which was super cool. I've used it to untie knots. I used it when a friend had wine but forgot the corkscrew. I always house the mini driver there.
on the tool sets.
I don’t get much use out of the corkscrew...the phillips gets used way more. -
42 uses for corkscrew
-
Well I gotta say...you guys are much more creative than I. I may get the huntsman instead!

-
With the only difference being Corkscrew vs Phillips they're both great tool sets.
I've become a great Fan of the Fieldmaster and it's become my EDC, regardless of what else I have with me
-
I'm a big fan of the corkscrew over the back spring Philips. My main uses for the corkscrew are untying knots (use like a small marlin spike), holding the mini-screwdriver, improving the draw on cigars that were rolled too tightly, and of course opening bottles of wine. The flat screwdriver on the end of the can opener can handle almost everything the back spring Philips can, with the exception of deeply recessed screws.
-
When I decided on the Fieldmaster at first it didn't "feel" like a true SAK due to the lack of corkscrew. After EDCing the Fieldmaster I really want to purchase a model with the inline and try it on for size. Plus I wear glasses soooo that handy little screw driver would be a BIG plus! Needless to say I am not unsatisfied with the Fieldmaster

-
I used my corkscrew recently to open up a can, I'd just cut my nails and couldn't get a purchase on the pull tab. :D
-
In my head, ever since I was a little kid drooling at displays of knives I couldn't afford, has been the idea that a real Swiss Army knife has a corkscrew. To me it was part of that classic look along with the red scales and the shield. And at some level I still feel like this...I've got lots of SAKs now that don't have a corkscrew, but every time I'm choosing what to carry it somehow doesn't feel 100% right when I pick one that doesn't have the CS. This is basically irrational as it's one of the tools I use least - the only rational aspect is that it carries the mini-screwdriver which I do use often. But I don't think I would feel any different even if it didn't do that :-[
One a more practical note, carrying a SAK with a corkscrew provides an ideal excuse to take up drinking wine :D Which I find to be a fun and enjoyable pastime. I must have drawn a hundred or more corks with different SAKs over time. The SAK CS is not as good as a dedicated corkscrew with a mechanical assist, of course, but it does the job with a little more effort on the part of the user. And it beats the hell out of no corkscrew.
-
Screw the cork screw into a stick and make a spear!
Sent from my LG-H830 using Tapatalk
-
The bars of my horses' hay stack are hollow. In the lower vertical hollow bar fits the uppervertical bar and it is secured with a spring.
Every now and then the hay plugs up in the lower hollow bar and then the upper bar can not sink into the lower bar. Than it's time to unplug the lower bar!
The cork screw is indispensable for these simple job!
Sorry for having no pictures.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login