Wenger mod - please help
-
I have an old Wenger (from before the Vic merger) 4 layer which I would like to slim down to 3 layer for better edc. As it is the first time I mod a SAK
, I would appreciate all the advice I can get from all the good people here. Specifically:-- I read from somewhere Wenger do not use bushings for their brass rods like Vic. Does this mean instead of using a drill, I have to manually file down the brass heads in order to pop out the implements?
- Since I am reducing my Wenger from 4 layer to 3 layer, can I use the existing brass rods by simply cutting off the excess length? (I have no idea what size brass rods Wenger use or where to source them
).
It appears there are plenty of good resources here for modding a Vic but not for Wenger, which I understand is a bit different and more complicated. I would love to here from people who have modded their Wenger before
. Thanks in advance !(Oops, just realized this should be in the Mod Squad section instead - can Mr Moderator please move accordingly, if you could? Sorry for any inconvenience this may have caused !)

-
I think the pins are 2mm and 2.5mm, but it's been a while since I did a Wenger mod. The rivets can still be drilled out, but it might be easier and more more controlled to file them, or use a small sanding drum in a dremel. I found the hardest part was peening them again, particularly the backspring pin, I think it was. As there's so many lumps, bumps, and scale clips on the liners, it's not easy to get an anvil/stidy in the right place underneath, and be steady enough to hit the right place on top.
Which layer are you removing?
-
Other than the fun and the value of the learning experience of modding your own SAK, maybe it would be easier to look for the three-layer Wenger you want and keep your four-layer intact?
-
@Myron said:
Other than the fun and the value of the learning experience of modding your own SAK, maybe it would be easier to look for the three-layer Wenger you want and keep your four-layer intact?Good thought. But I cannot find a 3 layer Wenger with scissors, and I am really digging the 84/ 85mm format, which I prefer over its larger 91mm+ cousins.
-
@AimlessWanderer said:
I think the pins are 2mm and 2.5mm, but it's been a while since I did a Wenger mod. The rivets can still be drilled out, but it might be easier and more more controlled to file them, or use a small sanding drum in a dremel. I found the hardest part was peening them again, particularly the backspring pin, I think it was. As there's so many lumps, bumps, and scale clips on the liners, it's not easy to get an anvil/stidy in the right place underneath, and be steady enough to hit the right place on top.Which layer are you removing?
Thank you for your feedback. I am thinking of removing the pliers and possibly transplant it to another mod which I have in mind.
-
Did you take a look into the Delemont line? Maybe there is a 3 layer model that suits your needs?
-
I haven't done any Wenger mods, but, you should be able to use the old pins after trimming them to length.
-
I'm not a big Wenger guy, and I'm not sure exactly what tool setup you're looking for, but isn't the Swiss Sportsman a three-layer SAK with scissors? It was available in non-LLBean scales, too, I think.
Edit: Yep, SAKWiki to the rescue. https://sakwiki.com/tiki-index.php?page=Wenger+Swiss+Sportsman

-
Thank you all for your feedback and reference links which I appreciate
. Yeah I looked at the current 85mm line up and the Evo14 appears to be the closest to what I have in mind. My only concern is, at 20.5mm the 3-layer Evo14 is THICKER than my old 4-layer Wenger which only measures 20mm. Not sure if this is due to the new chubbier ergonomics scales. On the other hand, there is a Super Tinker which is a 3-layer with scissors but it is only available in 91mm. Soo, I am back to square one, i.e. if I really want a slim 3-layer 85mm with scissors, I don't have too many other options other than getting my hands dirty 
-
You could also replace the Wenger scales with custom ones, thus making it thinner.
-
@Myron said:
I'm not a big Wenger guy, and I'm not sure exactly what tool setup you're looking for, but isn't the Swiss Sportsman a three-layer SAK with scissors? It was available in non-LLBean scales, too, I think.Edit: Yep, SAKWiki to the rescue. https://sakwiki.com/tiki-index.php?page=Wenger+Swiss+Sportsman

Yes, this is exactly what I need - a 3-layer 85mm with scissors (with normal / slim scales) and thank you for that link ! But it appears it is either a discontinued model or only available in the US and only in selected stores? I reside outside the US & really hope Victorinox can make this model available elsewhere. Like many others, I really miss the 85mm scissors.
-
@SirVicaLot said:
You could also replace the Wenger scales with custom ones, thus making it thinner.Good idea. I would appreciate some guidance to where I can source custom scales that will fit the new Wenger 85mm format please.
-
@roamingcat said:
Good idea. I would appreciate some guidance to where I can source custom scales that will fit the new Wenger 85mm format please.I just realized that the custom scales i had in mind won‘t work on the Wenger series. Most of the custom scales that I found are also 84mm, and they won‘t work either

You could make them yourself out of wood. It is not too complicated and a very nice weekend project.
You could also carry one of the 84mm Victorinox models, and pair that with a classic for scissors and nailfile. Tinker small and classic alox come to mind. You can even wear the classic on a neck chain, as some of us do. It is almost weightless.
-
@SirVicaLot said:
I just realized that the custom scales i had in mind won‘t work on the Wenger series. Most of the custom scales that I found are also 84mm, and they won‘t work either
You could make them yourself out of wood. It is not too complicated and a very nice weekend project.
You could also carry one of the 84mm Victorinox models, and pair that with a classic for scissors and nailfile. Tinker small and classic alox come to mind. You can even wear the classic on a neck chain, as some of us do. It is almost weightless.
Thank you for your thoughts and additional ideas. I currently edc a 58mm Signature on my keychain and I pair it with a 84mm Waiter. I was hoping to 'beef it up' with a modded 85mm Wenger instead of the Waiter when necessary. I am currently waiting for my Alox Bantam and Walker to arrive. As you can see, I am really into 84/85mm SAK now. Unfortunately, it looks like I may well have to leave my 4-layer Wenger as is, as some of the folks here suggested. It looks to be too hard and complicated excercise (at least for me due to lack of modding experience and instructions).
-
With those considerations the combo route might be the way to go. I never liked that idea. I always wanted all my tools in one SAK. But one can‘t deny that the combo route opens up so many options and variations, so I finally fell for it anyway :D
I am carrying a classic on a neck chain and a Pioneer in my pocket lately, and it works great. If i need more tools, i’ll add a Spirit or Swisstool.
Which tools are you actually missing on your waiter/signature combo? Or did you just want larger/sturdier tool implements?
-
@SirVicaLot said:
With those considerations the combo route might be the way to go. I never liked that idea. I always wanted all my tools in one SAK. But one can‘t deny that the combo route opens up so many options and variations, so I finally fell for it anyway :DI am carrying a classic on a neck chain and a Pioneer in my pocket lately, and it works great. If i need more tools, i’ll add a Spirit or Swisstool.
Which tools are you actually missing on your waiter/signature combo? Or did you just want larger/sturdier tool implements?
The neck chain carry is a great idea ! I have a silver alox classic and I am looking out for a stainless steel neck chain to match. As to my current waiter/signature combo, it is missing a saw when I go on my daily hikes. Thats why I have a Walker on order to cover those occasions. For my daily urban requirements, the waiter/signature gets the most pocket time. I am hoping my modded Wenger will cover me when I travel (and I like to travel light).

-
Surprising no one's mentioned the Wenger Traveller. Three layers with scissors; 17mm wide.
A new option might be a Delemont Evowood 14. Same as the Traveller but with the Vic can opener and awl. The Vic can opener turns Phillips screws. The scales are contoured similarly to the regular cellidor Evolution ones but I reckon you could grind/sand them down to be somewhat thinner, so that the overall knife thickness is about the same as the Traveller's.
However, your Waiter/Signature combo covers almost all the functionality of the above suggestions, and includes a pen. The combined weight (~35g + ~23g = ~58g) will be less than a Traveller (74g) or Evowood 14 (heavier than the Traveller). Since the alox Bantam/Signature will be even lighter, I'd stick with the combo. :)
-
@Sawl Goodman said:
Surprising no one's mentioned the Wenger Traveller. Three layers with scissors; 17mm wide.A new option might be a Delemont Evowood 14. Same as the Traveller but with the Vic can opener and awl. The Vic can opener turns Phillips screws. The scales are contoured similarly to the regular cellidor Evolution ones but I reckon you could grind/sand them down to be somewhat thinner, so that the overall knife thickness is about the same as the Traveller's.
However, your Waiter/Signature combo covers almost all the functionality of the above suggestions, and includes a pen. The combined weight (~35g + ~23g = ~58g) will be less than a Traveller (74g) or Evowood 14 (heavier than the Traveller). Since the alox Bantam/Signature will be even lighter, I'd stick with the combo. :)
The Wenger Traveller is the perfect SAK for my requirements. I'll pick one up in a heart beat. But I think it is no longer available, at least not new
In fact, the mod that I am planning = Traveller.As to the Evowood 14, I think it has the same configuration as the Evo 14. The latter with cellidor scales and one third cheaper than the wood version. I am wondering if the cellidor scales can be slimmed down with sandpaper filing which is a much more economical option. Has anyone done such a thing, and how does it look ?
-
Have you thought about placing a wanted ad for a traveller in the 'tools needed' section?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login