Comparison pic, please?
-
Here you go. Black is a Compact, Red a Waiter. Be aware though that I modded the combo tools on both, that is why a bit of the upper rim is missing.


-
You are awesome. Thank you very much. Do your mods make it easier to use on Philips?
-
Exactly that. It is now more like the can opener:

-
Nice. I use the can opener for Philips all the time. A couple more questions, since I can’t tell. Are those the same thickness, and is the regular can opener, like on a Spartan, thicker?
-
Hi Jazz, the regular can opener is thicker than the Combo tool because it does not have to overlap the main blade like the combo tool. 84mm and 91mm combo thickness is the same.

-
@SirVicaLot said:
Exactly that. It is now more like the can opener:
Thanks for the inspiration , I need to do that to my Bantam . How did you go about getting the metal off? Just trace the can opener and file till it matched? Don't want to stuff mine up
-
I put them right next to each other, like in the picture, then marked the part i wanted to take off with a sharpie. Used a stationary belt/disc sander to take off the material and then 400 and 2000 grit sandpaper to smooth it. Just go about it slowly, without a lot of pressure and let the sander do the work. Was pretty easy

-
Thanks for the prompt reply and tips. Got my Saturday arvo project sorted . Went to use my Bantam yesterday on a switchboard door and had a disappointing time learning the tip wasn't the same as the can opener as I'd thought . And today, the forum provides a solution

-

Combo tools work just fine in most phillips. I just use the ‘corner’ of the tip.
Provides pretty good access...often better than backside phillips.
-
Combo tools work just fine in most phillips. I just use the ‘corner’ of the tip.
Provides pretty good access...often better than backside phillips.
Maybe it is me, but I can‘t turn a Philips with the combo tool. Slips out constantly. Drove me crazy, hence the adjustment. All good now :D
-
@Storm said:
Thanks for the prompt reply and tips. Got my Saturday arvo project sorted . Went to use my Bantam yesterday on a switchboard door and had a disappointing time learning the tip wasn't the same as the can opener as I'd thought . And today, the forum provides a solution

Let us know how it goes

-
Went well , used an angle grinder in place of a belt sander , and then 400 600 and 1000 grit paper to tidy up. Might bring the face back in line rather than at an angle after workplace testing.

-
Looking good!

-
@SirVicaLot said:
Maybe it is me, but I can‘t turn a Philips with the combo tool. Slips out constantly. Drove me crazy, hence the adjustment. All good now :DThat's what she said. ;)
But seriously...try the corner in phillips screws.
-
@kamakiri said:
That's what she said. ;)But seriously...try the corner in phillips screws.
That is the usual trick but doesn't work to well when you have a switch board door or similar in the way, which I often do.
I could,of course, use the proper tool for the job instead of a SAK , but where's the fun in that I ask you?
-
:D 
-
@Storm said:
That is the usual trick but doesn't work to well when you have a switch board door or similar in the way, which I often do.
I could,of course, use the proper tool for the job instead of a SAK , but where's the fun in that I ask you?

Not the kind of thing I’d address with any of the openers or combos...but still do just fine with other SAKs.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login