Replace 1/4 drive on POWERLOCK ?
-
I posted this tip a few years ago but can't find it now. I cut a narrow piece of heat shrink tubing and used it to hold the driver spring.

I also used heat shrink tubing on the scissors handle to make it more comfortable to press.

-
That is a great idea

Sent fra min FRD-L09 via Tapatalk
-
I put a bit of super glue on each end of the spring a couple of years ago. Still holding with no problems.
Bob -
Thank you all.
I’ll try both methods.
Can this tool be replaced... is anything thick enough ??
-
@parnass said:
I posted this tip a few years ago but can't find it now. I cut a narrow piece of heat shrink tubing and used it to hold the driver spring.
I also used heat shrink tubing on the scissors handle to make it more comfortable to press.

Thanks for the ideas! I plan on removing the scissors, but, making an adapter for the scissors that would fit on the 1/4 inch drive adapter. It may make the scissors an external tool, but, they could be used on their own.
Sent from my iPhone using Tapatalk
-
While I’m going to be working on my PowerLock and adding heat shrink as shown, but where can I find additional tool covers for the tool? I think they could be a great way to add a customized touch using automotive or metallic paints.
Sent from my iPhone using Tapatalk
-
@Needlenose said:
Thank you all.I’ll try both methods.
Can this tool be replaced... is anything thick enough ??
You would have to make adjustments (i.e cut or reshape it), but Leatherman tools MIGHT work. I’ve considered looking into this, even if modifications had to be made.
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
