Which tool
-
Hello and welcome ! I used to Telemark when I was younger and lived in Colorado, the only way to go IMO !

I would suggest the Rebar, it has a great phillips ,awl and saw in case you needed one in the backcounty. It is a reasonably light weight MT. I carried my PST back in the day as part of my backcountry gear. The Rebar is basically the new version of the PST but with a few added tools and locks.

-
Hello and welcome [emoji4] I’d check Signal out if I were you
-
@alexanderre said:
Hello and welcome [emoji4] I’d check Signal out if I were youOr Vic Spirit, why not [emoji1305]
-
I would recommend the LM Wave+
You get the bit holder and if the screw driver
would wear out it would be easier to replace
And it gives you the option to use other bits like
Different size cross and straight head screws and hex
-
I would also say go for Spirit or Rebar. Both are excellent tools and lightweighted.
Only Tools Matters
-
I was going to say the Skeletool as a read your post, then see you came the same conclusion.
I hate to say it, but the LM Signal sounds like a good fit for what you want, and if you carry a folder anyway, you're at no loss for the Signals dinky dual-edge blade.
It may be worth checking if the LM bits are a good match for the bindings you regularly adjust (find a friend who has one?) Otherwise you might want to seek a tool that takes proper 1/4" bits so you can carry more generously sized drivers.
The Gerber Centredrive springs to mind, but it might be too big and cumbersome if you don't like toting half a brick in your pockets.
(On the upside the long driver arm may be a benefit, if you need room to swing your hand if the binding adjustment screws are hidden under straps or plates or what-have-you) -
I carry the Victorinox Spirit every day. It has a scraper and a decent Phillips screwdriver and it has scissors which the Rebar doesn't. But then the Skeletool might do all you need without extra weight. Leatherman also makes a couple of one piece tools for snowboarders. One of them, the Hail can be had with a Style CS that snaps into it so that would cover the pliers. There are so many different tools that might suit you it would be best if you could find a shop where you could see them and handle them and see if one feels better to you. The Gerber MP-400 is another fairly small and light tool to consider.
-
You have come up with and gotten some good suggestions already. Skeletool CX and Vic Spirit were two that came to my mind as well. For the sake of a couple of other options to consider:
-
Victorinox Ranger Grip 174 Handyman
-
Leatherman Rime or Hail + dedicated pliers (look around for what you like, but for my money small Knipex Cobra pliers punch well above their weight)
-
Dedicated stubby #2 or #3 Phillips screwdriver + dedicated pliers
-
Any Victorinox SAK with a Phillips screwdriver + dedicated pliers
-
If you can get by with smaller pliers, 85mm, 91mm, and or 111mm Victorinox SAKs with pliers and Phillips might be worth a look.
-
-
I suggest you choose a multitool with the screwdrivers permanently attached to it. If you ever drop one of those small Leatherman bits in the snow, you might have trouble finding it.
-
Instead of rebar, Id suggest the Supertool 300. The weight isnt really that bad. My back gets relief when I switch to the ST300 from the Surge. Rebar wouldn't be a bad choice though.

-
@alexanderre said:
Or Vic Spirit, why not [emoji1305]The phillips on the Spirit is not the best, I found it to cam out on some screws.
-
Another vote for the Rebar, either regular or Knifeless; it has all the tools you need, comes in regular stainless steel and in black oxide (which could reduce glaring; not offered on the Knifeless though) and the removable bit adapter kit could be added in case more driver versatility is needed. Same tool load as the Super Tool but in a lighter and more compact format. Good for medium to heavy duty use.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
