Light home electrical work
-
I recently did some light home electrical work. Fixing lamps, various cords, wall sockets, etc. I was curious whether a multi tool, or a Swiss Army Knife, would be best. And which model of either.
So what I needed:
• Small Phillips
• Small straghthead
• Pliers
• Wire cutter
• Wire stripperIn one instance, I was working in a cramped corner of my laundry porch. Not ideal for best arm positioning. I started with my Leatherman Free P4. Awkward, and poorly balanced in my hand. A real TWO handed job. The Phillips was too big, so I used the file tip. For grabbing almost free screws I used the pliers. Yes, all the tools I needed. But hardly a boulevard stroll.
My SOG PocketPowerPliers was great for pulling out almost free screws in my awkward corner.
With other wall sockets, I tried a SwissTool Spirit. Much better. Hand balance not an issue. And again another one with a Swiss Army Atlas with pliers. Great!
But my overall best tools for this very light electrical work were basic 91mm models, unfortunately lacking minipliers. I fished out screws with the tweezers, which for such tiny screws was ok. Not ideal. But for sitting with a lamp in my lap, to rewire, here's my ideal:
The SOG PocketPowerPliers, and any handy 91mm Victorinox. I don't own a Leatherman ES4, but I suspect that is a superior light home use electricians tool.
I really came to see how awkward full-sized angle-rich multitools are. In truth, the Gerber CenterDrive was almost the most unnatural tool to use.
The only stripping I had to do, I did by pinching the insulation gently from the side with a Victorinox mini pliers, and pulling off. Well, it works for me on light wire, and old insulation. If I'm hired to rewire a frigate or a shopping mall, I'll get fitted with proper kit.
I especially appreciate the easy hand-feel and balance of the 91mm Victorinox models. 84mm too. But the actual Electricians model is not ideal for light, small-scale home, without a minipliers and tiny Phillips.
Best light home electrician's tool? Es4 experience?
-
I have several S4s, P4s and PS4 but no ES4.
The Squirts are great little tools, and I would guess the ES4 would work great at that task.
What about a Deluxe Tinker? -
I usually use a mix of my spirit x and modded alox if it's just one thing that has to be done.. If it's more then one thing I go to my garage and get the "proper" tool for the jobs
But if my spirit x had the phillips from the rebar and got a good grip it would be great. But you can't beat a good bacho side cutters with a multitool when it comes to cables
Skickat från min SM-A415F via Tapatalk
-
@israelpiper said:
Best light home electrician's tool? Es4 experience?ES4 (sadly discontinued) puts the rest to shame for a light home electrician's MT.
I have (or perhaps had; it's MIA at the moment) one, and the standout feature is obviously the dedicated wire strippers, which are great. The small pliers section at the tip is also very handy, allowing use like a small pair of needle-nose pliers. The wire cutter is OK, as long as one sticks to soft wire of a modest gauge. The two screwdrivers (standard flat and flat Phillips) handle most common screws. The scissors and file are "meh", but not really used much in electrical work anyway. The chisel-ground 420HC blade isn't going to win any awards, but it's functional if one needs to open a package of parts or strip the outer jacket off a cord or cable. And finally, the bottle opener does its job just fine when the work is done and it's time to pop the top off a cold one...

-
I have a kit assembled with the right tools for the job. Need to replace the worn-out hand-me-down strippers with a new, good pair, however.
This is on my belt as a backup. It can do most of the work itself. Listed as discontinued, but still pretty easy to find. They only seem to have made it two years.
https://www.kleintools.com/catalog/combination-cutting-tools/electricians-hybrid-plier-multi-tool
-
Though I'm always keen to experiment with my multis, usually I cave to using dedicated professional tools for electrical work....it's an annoying enough task as it is, making it more fiddly and frustrating with less-than-ideal tools is for the birds.
On a note related to electrical work though - the PE blade and saw of my 2004 LM Wave made short work of replacing a bit of gyprock. (I'm sure there's a band of smug old people clicking their tongues at me for punching through gyprock with a folding knife....ah well.)
-
For anything but very light work, I, too, would prefer dedicated tools. Changing wall plugs and rewiring lamps actually doesn't need professional tools. I never go beyond that level.
My biggest complaint is how awkward my Gerber CenterDrive was for cramped quarters. My Victorinox, Leatherman, and SOG MTs felt less awkward in the hand, despite not having centred drivers.
Real world use tells the tale, though we may not all have identical experiences or expectations.
-
I'm an Electrical Engineer. I have an ES4 on my work keys, and use it occasionally, usually for very small stuff and mostly for the wire strippers for delicate wires used in instrumentation. I mostly use the Surge at work or dedicated tools if required. The wire cutters are capable of stripping the ends of most wires and the crimper can be used for securing bootlaces if you give it 2 or 3 goes along the length. I'm not doing full on electrical installs, just testing, commissioning, etc.
Obviously anything live needs insulated tools but that should be avoided when possible.At home I use my Swisstool Spirit X, which seems to have one of the best all round tool set for general home maintenance tasks I need it for.
-
Ive used my ES4 Squirt at work for stripping wires. Took out a photoeye and replaced it, having to strip wires. Worked better than the Klein wire stripper I have.
-
As others have suggested, the ES4 was designed for those kind of things if you can find one.
If you are like the size and feel of 91mm SAKs, then the Cybertool M might be a good option.
Two LM PS4 or Deluxe Tinker are two other options you might want to look at.
-
Klein Diagonal Cutters
Ideal Flex Strippers
Snap-On Ratcheting Screwdriver
Small Klein or Knipex Lineman's PliersI work with these every day already and am not about to use inferior tools ever unless I have to?
ES4 and Wera Extending driver in Briefcase though for sure!
Centerdrive always on my belt too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login