Cutting test
-
Hey. It happened that one of my leashes decided to break. The handle part. Anyway, it was to be cut afterwards, i wanted the carabiner. But, I write this because i put almost all my blades to the test. And each cutted it without issues. One strike, one cut. And now i am really wondering if the serrations are better... yes, i did noticed differences. But not between straight blades and serrated blades. Not even between blade lengths... the leash was ancorred and i made push and pull cuts. Can't get it, actually? What are your experiences?
I am not able to upload the photos. For some reason. -
Still no go for the pics

-
Check the size in Kb. If they're over the accepeted limit, try to resize them with MS Paint, for example.

-
-
Photos aside, serrated vs plain edge really depends on the material you're cutting. Nylon and other man made materials can be hard and slippery. A sharp PE blade just glides over the material with little effect. In general a serrated blade will chew through materials even when not all that sharp. Might not be a clean cut, but it will manage to do the job. Along that train of thought I have found that using course or medium honing stones result in an edge that cuts better, if not quite as cleanly. Sounds like you keep your blades sharp as they all cut in one try.
-
Now i paid attention. It actually doesn't let me to upload. I take the steps and in the end there's no path selected. It might be something with the browser maybe, although it didn't happen before. The pics are 80 and 200kb, so no issue there... on imgur, i'd have to make an account. Ihm... not now. The leash itself was finger thick with 11 threads in it. Some plastic type fabric, because you can melt it with a lighter. Thing is, it made me question some of the blades on this particular type of cutting. The best slicers that i have didn't impress me here and the longer serrated blades didn't either :(
-
@smiller43147 said:
Photos aside, serrated vs plain edge really depends on the material you're cutting. Nylon and other man made materials can be hard and slippery. A sharp PE blade just glides over the material with little effect. In general a serrated blade will chew through materials even when not all that sharp. Might not be a clean cut, but it will manage to do the job. Along that train of thought I have found that using course or medium honing stones result in an edge that cuts better, if not quite as cleanly. Sounds like you keep your blades sharp as they all cut in one try.Indeed, not polishing the edge will keep micro-teeth in fact. And those cut better some materials.

-
Now i can upload...


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login