EDC in DEC
-
@comis said:
That's really fantastic office view, must be a Grade A office building!
Thanks Sos & comis

Reckon it was built in the 60's, TBH it's the kind that normally gets torn down and a modern skyscraper replaces it but talk about location, location, location eh
I should note that's the owner's office
my normal view is very different but as I'm the only one there until the new year.... -
<u>DAY 3</u>
Used my phone to pinpoint my location to send to recovery after getting a flat on the bike (on my way home tonight)

I then waited for 90mins in the freezing cold for said recovery (at least it wasn't raining
)I should point out that I wasn't at the hotel, just passing when it all went off (off the wheel rim that is
)Apologies for the subsequent late post :D

-
@ReamerPunch said:
Day 3Sos24 made me reconsider and include glue in my edc, so, big thanks!

Were you using a Mr Pinchy
(hope all is healing well
) -
@Nix said:
I love that chisel-thingy tool. Not sure why, but I do.Because it is awesome! Useful and well made, just like the rest of the Spirit
@McStitchy said:
This would be the moment for Captain Fuzzbeard to chime in... usually
Guess I'll have to do it myself today...


-
@Alan K. said:
Day 03
I'll be on the road later today so I figured I'd better sneak in a picture before I get too busy. I really like this pairing of the Leatherman Sidekick and Victorinox Mountaineer. I miss the combo tool in the Spirit and the magnifying glass in the Swiss Champ though.The Spirit combo tool is one of the reasons that the Spirit usually gets the nod over the Wave. I also understand the magnifying glass which is why I love the Yeoman.
@comis said:
However, in terms of durability and being a fidget 'gadget', I think Zippo is one up on this.Zippos are definitely great as fidgets, the flipping action and sound are so pleasing. That is the main reason I carry a Zippo.
-
Day 3
I was happy that I chose my steel water bottle today instead of the platypus because I wanted some hot tea.
I also used the pen to address a package, the combo tool to open a protein shake, magnifying glass to help read a label, Knife blade to cut a pear and a antibacterial wipe for hands a water bottle after leaving the grocery store.


-
Strong work, Sos!

-
Day 3
Used the Handyman‘s pliers to replace a sanding drum on a Dremel tool.

Also used the pliers to loosen and tighten the lock nut. No idea where that darn wrench is


Also this happened today. Was using the backside screwdriver to tighten some hardware of closet folding doors. It was a tight area, so the can opener wasn‘t an option. I should have gotten a ratchet, but wasn‘t in the mood to walk all the way to the basement for just one screw. After all, that is why I carry a MT. Quick fixes for everyday repairs.
It is hard to see in the picture, but the tip of the screwdriver is twisted. Guess it is light duty only :D I was able to twist it back to its original shape, but it has some scars now.

-
That is a shame.
Glad you were able to straighten it out again. But that is a disappointment. Was there an issue with the screw?

-
Must have been, didn‘t feel it though.
Just another reason I like the more heavy duty Spirit. But it is a challenge after all, so i will use the tools even if they break in the process 
-
@Nix said:
Those noodles in coconut soup look pretty good. How'd they turn out?What I like most about this noodle is they do include a generous amount of milk powder which IMHO, essential to make any Laksa/curry great. But in case anyone wants to give this a try, please do NOT follow the instruction on the package. They suggested too much water for the noodle soup in the end, so after you cooked the noodle, drain it like normal pasta, and pour back in a very small amount of boiling water to make the soup thick.

-
@Jpac said:
I´ve yet to figure out how to quote two posts in one reply, so here I come again.Thanks, pfrsantos!
yes, I made it ssome three years ago and still going strong! It was made to fit my wrist and has only worn more comfortable over time.I had a quiet day so the pic for today will be of my wallet which I used to pay at the grocery store and which -you guessed!- I also made. :D
<a href="https://flic.kr/p/2jRgSxz" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50440719383_af51326dc4_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>leather wallet by juan pedro almeida, en Flickr.<a href="https://flic.kr/p/2jRgSAf" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50440719538_33c3a55061_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>wallet by juan pedro almeida, en Flickr
That looks well made, great job!
In terms of quoting multiple posts in a reply, it is pretty much the same thing as quoting your first post. Once you finish replying to the first post in your own reply box, make a new line, then just press 'quote' on another post, and the forum will quote the 2nd post for you. Just keep on repeating the process, you will be able to multi-quote in your reply.

-
@Echotech said:
Thanks Sos & comis
Reckon it was built in the 60's, TBH it's the kind that normally gets torn down and a modern skyscraper replaces it but talk about location, location, location eh
I should note that's the owner's office
my normal view is very different but as I'm the only one there until the new year....
.... hope the owner doesn't read this thread :ahhhNice new SAK btw.

-
Used my phone to pinpoint my location to send to recovery after getting a flat on the bike (on my way home tonight)

I then waited for 90mins in the freezing cold for said recovery (at least it wasn't raining
)I should point out that I wasn't at the hotel, just passing when it all went off (off the wheel rim that is
)Apologies for the subsequent late post :D
Oh, that's annoying. Sorry to hear :-
Last time I've had that the missus took an hour to find me... a 10 minutes drive away ::)
Ok, it was dark, and on Irish country side back roads she doesn't know...Anyways, did you miss anything in your EDC you'd like to have at that moment?

-
-
@McStitchy said:
.... hope the owner doesn't read this thread :ahhhNice new SAK btw.

Haha true!

Thanks McS
reckon the evo is a little beauty …shame I can’t carry for another month 
-
@SirVicaLot said:
Day 3Used the Handyman‘s pliers to replace a sanding drum on a Dremel tool.

Also used the pliers to loosen and tighten the lock nut. No idea where that darn wrench is


Also this happened today. Was using the backside screwdriver to tighten some hardware of closet folding doors. It was a tight area, so the can opener wasn‘t an option. I should have gotten a ratchet, but wasn‘t in the mood to walk all the way to the basement for just one screw. After all, that is why I carry a MT. Quick fixes for everyday repairs.
It is hard to see in the picture, but the tip of the screwdriver is twisted. Guess it is light duty only :D I was able to twist it back to its original shape, but it has some scars now.

Great uses Sir

The thing with having a good grip and level is... tools can bent. You've had a small 2.5mm flat driver on a big T handle there.I've managed to bend a bottle opener screwdriver in 90° position for the same reason

-
Day 4

-
@comis said:
(...)
In terms of quoting multiple posts in a reply, it is pretty much the same thing as quoting your first post. Once you finish replying to the first post in your own reply box, make a new line, then just press 'quote' on another post, and the forum will quote the 2nd post for you. Just keep on repeating the process, you will be able to multi-quote in your reply.
Thanks, Chi. Didn't knew about this feature. I usually just quote a post and reply, then quote another and copy/paste it into the first quoted, deleting the second reply.
I'm such a noob...

-
@Jpac said:
I´ve yet to figure out how to quote two posts in one reply, so here I come again.Thanks, pfrsantos!
yes, I made it ssome three years ago and still going strong! It was made to fit my wrist and has only worn more comfortable over time.I had a quiet day so the pic for today will be of my wallet which I used to pay at the grocery store and which -you guessed!- I also made. :D
<a href="https://flic.kr/p/2jRgSxz" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50440719383_af51326dc4_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>leather wallet by juan pedro almeida, en Flickr.<a href="https://flic.kr/p/2jRgSAf" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50440719538_33c3a55061_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>wallet by juan pedro almeida, en Flickr
Here, take a look at this section. I think you'll fit right in (to paraphrase her). If you'd like to share some of your creations, you'd be most welcome.
As for this design, it's a small pouch for coins and a slot for cards/cash, right? What's that big metal button for? Just for aesthetic reasons? The small split ring isn't part of the wallet, is it?

Edit: took another look at the big button. It's got a hole, right? You could use it to arttach a chain.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login