Mad Max Challenge
-
@Simon_Templar said:
Day 29The challenge is almost over! Time went by so quick, it's incredible. So here's to you, my fellow participants

Nice pic Simon!

-
@Simon_Templar said:
Day 29The challenge is almost over! Time went by so quick, it's incredible. So here's to you, my fellow participants


-
@FolderBeholder said:
Day 29
Retail therapy.That's crazy!
-
Day 29
Late posting this one but it was taco right for dinner and needed to open the can of beans

-
@Simon_Templar said:
Although I can imagine this XLT blade is best for opening duty (also on account of its placement in the middle of the knife's body), I just cannot bring myself to use it. Somehow I am always afraid of damaging it (the same is true for the electrician blade). It's silly - the XLT has three small blades and I keep using the least comfortable one 'cause I am afraid to damage the more exotic alternatives
I am afraid of damaging mine as well especially with sharpening being much more difficult but I just love how this blade is very precise due to the curvature of the blade
-




Little guy's fishing pole is running out of battery(yes, he got a singing fishing pole, funky tool that is) and I was thereby requested to replace those batteries immediately. First I use the detachable key with phillips for the job, but the head size was all wrong. So I end up pulling out the inline phillips in the middle and get the job done. At first I worried the phillips might be located at one side of the Giant and that would make using it super awkward. Turns out folks at Wenger probably did think of that and place it right in the middle for the ease of use.

-
Day 29
Had to look a little bit closer.

-
Day 30
Well, here we are at the end of the challenge. A big thank you to Comis, who first came up with the idea for a Giant challenge and then was so kind as to extend the challenge to lesser models!
I therefore not only enjoyed a month of seeing the Giant in action - thanks to Lisa and particular Comis, who went above and beyond the call of duty to demonstrate real life use cases - but also carried my own XLT in the pocket for 30 days.
As expected in this time of lockdown, the XLT did not get a fair chance to play the numerous aces up its sleeve. Still, I very much enjoyed having it around, dressing it up a bit and discovering for the first time a long overlooked tool, the fishscaler.
So although the XLT will now go back into the drawer (to be replaced by a much smaller SAK), I will keep it and this challenge in very good memory and am certain there will be times in the future where the XLT will return to my pocket.
Many thanks to all participants and bystanders, it was a great joy doing this challenge with you all!

Edit: added a bonus pick: fishscaler used to hold a loaf of bread for safe cutting


-
<u>Day 30</u>

I used the tweezer briefly today and had a really hard time to pull it out. And when I try to return it back into the scale, it's pretty much 'stuck' and much to my surprise, the scale actually just fell right off the chassis. Turns out this side of the scales is not snapped onto the chassis, but seems to rely on double sided tape/some kind of soft glue. And the reason behind stuck tweezer is because those tape/glue overlap the path where it travels.Since the Giant is mostly a 'show piece', I think I probably may repair it with new double sided tape, instead of finding new scales to snap it back on.
I will write another proper wrap later today to celebrate the ending of this challenge.

-

I used the tweezer briefly today and had a really hard time to pull it out. And when I try to return it back into the scale, it's pretty much 'stuck' and much to my surprise, the scale actually just fell right off the chassis. Turns out this side of the scales is not snapped onto the chassis, but seems to rely on double sided tape. And the reason behind stuck tweezer is because those tape overlap the path where it travels.Since the Giant is mostly a 'show piece', I think I probably may repair it with new double sided tape, instead of finding new scales to snap it back on.
It's like a metaphor. From the outside, the Giant seems composed and majestic, but underneath it's all just held together by some duct tape...
-
@FolderBeholder said:
Entertainment purposes only. :DThat's money well spent.

@Simon_Templar said:
Day 29The challenge is almost over! Time went by so quick, it's incredible. So here's to you, my fellow participants

Cheers to you! -
@SDDToolCo said:
Day 29Late posting this one but it was taco right for dinner and needed to open the can of beans
Good use!

Had to look a little bit closer.
When did you last visit? Was it on a high speed rail? :D
@Simon_Templar said:
Day 30Well, here we are at the end of the challenge. A big thank you to Comis, who first came up with the idea for a Giant challenge and then was so kind as to extend the challenge to lesser models!
I therefore not only enjoyed a month of seeing the Giant in action - thanks to Lisa and particular Comis, who went above and beyond the call of duty to demonstrate real life use cases - but also carried my own XLT in the pocket for 30 days.
As expected in this time of lockdown, the XLT did not get a fair chance to play the numerous aces up its sleeve. Still, I very much enjoyed having it around, dressing it up a bit and discovering for the first time a long overlooked tool, the fishscaler.
So although the XLT will now go back into the drawer (to be replaced by a much smaller SAK), I will keep it and this challenge in very good memory and am certain there will be times in the future where the XLT will return to my pocket.
Many thanks to all participants and bystanders, it was a great joy doing this challenge with you all!

Edit: added a bonus pick: fishscaler used to hold a loaf of bread for safe cutting
Great wrap, and thank you so much for participating! I think the re-discovery of fish scaler in your journey is pretty fascinating, and I think in many ways, it's really part of the reason why we join challenges in the first place--to learn more about the tools and ourselves. -
DAY 30
One last look at the Wenger Tool Chest Plus.
It has been a fun challenge,
I enjoyed seeing all the posts.
Thanks for hosting the challenge comis!

-
<u>Day 30a (Wrap)</u>
To celebrate the end of the challenge, I did manage to open a young coconut with the Giant:

First to remove the husk from a young coconut

Next, I'd use the "Club face clearner"(I kept thinking it's an awl, apparently it's a golf tool) from the backside to punch thru the thick husk.

Afterwards, I tried using the pliers to pry open the top, but no joy. So I end up prying open the coconut with the thickest blade I could find, and success!To wrap up, gonna really thank everyone partaking in this challenge(in no particular order) Ulzhan, Simon_Templar, FolderBeholder, SDDToolCo and Vicman, each one of you have brought something different to the challenge, and make this challenge unique in your own ways. Despite the pandemic and restricted use outdoor, I am grateful to be able to make the best of the situation and have thoroughly enjoyed your company on this challenge!

All the free magnets from this and previous challenges have gone to the printer, and should be ready to distribute in a week or two. <u>If you haven't given me your address and would like a free magnet, please kindly private message me your address and it will be shipped to you once it is done. </u>

See you on the next challenge!

-
@SDDToolCo said:
Day 29Late posting this one but it was taco right for dinner and needed to open the can of beans
Good use SDD!

-
@Simon_Templar said:
It's like a metaphor. From the outside, the Giant seems composed and majestic, but underneath it's all just held together by some duct tape...Duct tape fixes everything... :D
One last look at the Wenger Tool Chest Plus.
It has been a fun challenge,
I enjoyed seeing all the posts.
Thanks for hosting the challenge comis!

Thank you for joining us!

-
@Simon_Templar said:
Day 30Well, here we are at the end of the challenge. A big thank you to Comis, who first came up with the idea for a Giant challenge and then was so kind as to extend the challenge to lesser models!
Nice pics Simon and congratulations on completing the Challenge!

-
@comis said:
I used the tweezer briefly today and had a really hard time to pull it out. And when I try to return it back into the scale, it's pretty much 'stuck' and much to my surprise, the scale actually just fell right off the chassis. Turns out this side of the scales is not snapped onto the chassis, but seems to rely on double sided tape/some kind of soft glue. And the reason behind stuck tweezer is because those tape/glue overlap the path where it travels.At least it waited til the last day!
Nice pic comis!

Thanks for being our host and congratulations on completing the Challenge!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login