Combo Tool Challenge?
-
@ElevenBlade said:
I don't see why not... There's nothing between the SD and the Alox scale, and the SD is robust enough to act as a prybar on the "inner" end.
To be fair, I did have nightmares. I don't do any torquing like that anymore. I even got a Griffin pocket tool to use for that purpose instead - but I wound up never using that, and it is sitting on the shelf for anyone who's interested.
I know.... it's just that we always have that idea that Alox is almost indestructible...

-
@Sos24 said:
A quantifiable study would be interesting. The cap lifter itself being stronger due to being thicker is true, but how much of that actually translates into capability difference when considering it being part of a SAK with same pin size and length, is the question. For example, how much more torque could the cap lifter actually withstand compared to the combo and how much difference would that make in jobs that are being down using a SAK?I do know that as a scraper or even light prying with a narrow opening, the combo tool works better than the cap lifter due to the narrower tip.
I've used the edge of the standard can opener (which I believe is thinner than the combo tool) to pry in openings that were too narrow for the cap lifter.
@ElevenBlade said:
I don't do any torquing like that anymore. I even got a Griffin pocket tool to use for that purpose instead - but I wound up never using that, and it is sitting on the shelf for anyone who's interested.That's why I carry a PWII in my wallet. I believe that tool would take all the torque I could apply by hand without using a cheater. Another trick I've used is applying the torque to the tool itself below the pivot point, so that the pins, liners, etc. never see it. Or, if that's not an option and I know I'm about to push my luck, I gorilla grip the tool to try to help keep it together.
-
Interesting idea, I love the small blade but do also appreciate the combo tool, in fact, for whatever reason, I felt the combo tool open cans just as quickly as my regular can opener.
@nate j said:
Another trick I've used is applying the torque to the tool itself below the pivot point, so that the pins, liners, etc. never see it. Or, if that's not an option and I know I'm about to push my luck, I gorilla grip the tool to try to help keep it together.Nate, what exactly do you mean by this? I do push my SAKs once in awhile just for the sake of it, and am wondering this. Could you please elaborate on this?
-
@comis said:
Interesting idea, I love the small blade but do also appreciate the combo tool, in fact, for whatever reason, I felt the combo tool open cans just as quickly as my regular can opener.Agree, with the can opening. I now some people complain about the combo tool’s ability to open cans, but I have no problem using either one.
-
@comis said:
Nate, what exactly do you mean by this? I do push my SAKs once in awhile just for the sake of it, and am wondering this. Could you please elaborate on this?First picture: Using fingers to apply torque to the tool below the pivot point
Second picture: Using another tool to apply torque below the pivot point (normally right hand would be on the exposed handle, but I needed it to take the picture)
Third and fourth pictures: "Gorilla-gripping" the tool, i.e. squeezing scales together as tightly as possible




-
Good idea for a challenge.
I really like the combo tool.
I never had any problem using it.Enviado de meu moto g(6) usando o Tapatalk
-
Sounds good then! I'll take a look at the calendar and see when we can fit it in.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

