driver?
-
It is made for sockets or if you have Sogs 1/4 inch adaptor http://sogknives.com/store/QTR-SKT.html you can use standard screwdriver bits.
-
Well I use mine really only for my home haunt. I kep several sockets in a nail bag I wear when setting up the thing. That way if I need to mend the cemetary fence, or fix a pup up I dont have to leave people there to keep everyone out. I can just fix it on the spot. But I have no use for the driver any other time.
-
Here's a picture from my recent review on the Gerber EAB. In the picture, I used a screwdriver bit on my powerlock socket adaptor to disassemble the EAB knife:

-
where is the pic?
-
Is the picture not showing up? ??? Can anybody else see it? It's nothing special, it just shows a screwdriver bit attachment on the socket adaptor.
-
I can see it.. I am using Mozilla Firefox, though..
-
I can see the pic

As for the 1/4 driver...it can be used with the SOG bit adapter like WH867 said.
I've used mine with regular sockets when I didn't want a big clunky ratchet attached (like when I'm taking apart other SOGs).
I recently been EDCing a borrowed Powerlock 2.0 recently, and noticed the new 1/4 drivers have a locking notch so you can lock it in an "L" shape...like the SOG Phillips driver. Good idea IMO.
-
I tried the funny driver thing on my Powerlock the other day, and it fits together neatly enough.
However, I was using a socket, which I had to retrieve from my socket set, which also had a ratchet, so I very quickly switched over to the ratchet, as I couldn't get enough torque using the Powerlock. I toyed with the idea of trying the driver at 90 degrees (i.e. half opened) to get more leverage, but wasn't sure that it would take it.
I can see the benefits or screw driver bits though, I didn't realise there was a hex adapter too, I'm off to 'Tools Needed'
-
I've never actually used one myself but I like the different thinking behind it.
-
I used a generic adapter from a tool set I had on my Paratool - it works OK, but wobbles a bit. Does anyone know if paying for the SOG version prevents this?
-
@nuphoria said:
I used a generic adapter from a tool set I had on my Paratool - it works OK, but wobbles a bit. Does anyone know if paying for the SOG version prevents this?On the Powerlock, it's not an adaptor like on say a Leatherman where you stick it over the phillips driver, it's an actual 1/4" tool with a spring around it. It's used for the 1/4" sockets that you get in socket sets etc? If you see what I mean. I'll get a pic up later of I get the chance.
-
If you mean the type that SOG sell as spares, that's what I have - with a wire spring bit around the edge. It just doesn't hold on to the adapter I have very tightly. I'll go look at the powerlock and see.
-
@nuphoria said:
If you mean the type that SOG sell as spares, that's what I have - with a wire spring bit around the edge. It just doesn't hold on to the adapter I have very tightly. I'll go look at the powerlock and see.Yeah that sounds like the same thing. It fits pretty snugly into the square hole in standard sockets - diagonally from memory.
-
Hmm, I shall have to go tinker around in my toolboxes and see if I have one that fits better then - I think the problem is that it's not deep enough to hold it firmly. I compared it to the picture on the SOG site and that seems deeper.
-
I have the SOG one and it is wobbly when on. It is thinner than other 1/4" drive bit adaptor I have thou, and since I pack it in my ski kit to use with #3 phillips I suppose it's worth it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login