Help me decide...
-
After mulling it over for quite a while, I'm nearly ready to pull the trigger on a LionSteel Warhorse. The only question still vexing me is what handle material I should get.
Depending on what I think when I get the knife in hand, I'm hoping it could become a fairly regular carry. So, my main concern is to get a durable handle material, one that can stand up to the rigors of daily carry and use. Sometimes my knives and tools get used hard and put away wet, and I don't want anything I have to worry about wiping down, keeping a coat of oil on, or otherwise babying if it can be avoided.
Due to the cost, I will not be following the standard MT.o protocol of "get both" or "get them all". One knife only at this time. The cost difference between the different handle materials, however, is not significant and will not be a consideration.
Here are my initial thoughts:
-
Olive Wood - has a pretty grain structure, but otherwise I'm not sure it's a great choice for a knife handle. Probably my last choice at this point.
-
Ebony - renowned for its hardness and longevity, but still wood. Also a classic material for knife handles. I own perhaps one or two knives with ebony handles, but none that I carry. Looks and feels nice, but don't think it can match the durability of a composite.
-
Natural Canvas Micarta - probably my top choice at this point. Widely used and has a good reputation, and I own enough knives with micarta handles to be comfortable with it.
-
Carbon Fiber - good looking, but I question whether the use of carbon fiber in knife handles is really a performance-based choice, or more of an aesthetic choice or sales and marketing gimmick. I own maybe a couple of knives with carbon fiber handles, but only one that I've really carried. There seem to be a lot of concerns about poor impact resistance, though actual accounts of carbon fiber knife handles cracking or breaking seem to be in short supply.
Which handle material would you choose, and why?
-
-
You have answered your own question really, either micarta or Carbon Fiber, most likely micarta
-
I would say micarta as well

Sent fra min M2002J9G via Tapatalk
-
I voted Micarta too, but none of the votes placed are showing for me, weird.
-
@nate j said:
- Carbon Fiber - good looking, but I question whether the use of carbon fiber in knife handles is really a performance-based choice, or more of an aesthetic choice or sales and marketing gimmick. I own maybe a couple of knives with carbon fiber handles, but only one that I've really carried. There seem to be a lot of concerns about poor impact resistance, though actual accounts of carbon fiber knife handles cracking or breaking seem to be in short supply.
I have the Fox Suru with CF framelock, yes, the lockbar is made of CF. In my eye, there is absolutely no worry about the durability of CF.
As a fan of CF, I also have my custom kitchen-knife with CF handles (I have them for 2 years now and they get used a lot) and the CF looks still like new.
Oh and Italian companies usually do a great job with CF.
-
You left out the "Awl of the above" option...

-
@pfrsantos said:
You left out the "Awl of the above" option...

This is the way...
-
:Dbut I did vote micarta ;) :D
-
Micarta

-
And it's another Micata from me :D
It seems to bet he hardest wearing option. Carbon Fibre comes second but when worn can break down fairly quickly.
-
It's a Barlow it needs Ebony.

-
@gregozedobe said:
I voted Micarta too, but none of the votes placed are showing for me, weird.That was my fault. When I created the poll, I set it to run for 7 days, but checked the "Don't show results until the poll ends" option instead of the "Show results once someone has voted" option. Fortunately, I was able to edit it, so everyone who has voted should be able to see the running results now.
-
@pfrsantos said:
You left out the "Awl of the above" option...

No, I addressed it...
@nate j said:
Due to the cost, I will not be following the standard MT.o protocol of "get both" or "get them all". One knife only at this time.
-
As a daily carry with a durability factor Micarta is the one. Ebony would be second but a drop could end with a crack or chip.

-
@nate j said:
That was my fault. When I created the poll, I set it to run for 7 days, but checked the "Don't show results until the poll ends" option instead of the "Show results once someone has voted" option. Fortunately, I was able to edit it, so everyone who has voted should be able to see the running results now.Yep, I can see the votes now

-
While Ebony is gorgeous I chose Micarta. I've got several knives in Micarta and as you know its hard wearing.
-
My initial thought was Ebony, but the micarta looks nice on this one.
Hmmm, but micarta can get dirty at the corners/edges where the fibers are not fully enclosed in the epoxy
Is there a Rosewood Dymondwood option?

...a whatever, micarta then.
-
I don't really like the look of the micarta on this one, personally it would be the CF. In fact it was the CF, albeit on a Roundhead.

-
Truth its a hard decision. I love the Ebony but CF sure looks cool and I don't have anything CF. I do have lots of Micarta and can attest to its toughness.I stand by my choice tho

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
