EDC small diagonal cutters
-
Hi guys, I recently bought the Knipex Cobra XS and was impressed by its performance for its size. It's even better than MT pliers.
So I was wondering. Are there diagonal cutters of similar size but better than MT cutters?
If there are, then those, Cobra XS and a Victorinox Ranger would cover almost everything!Στάλθηκε από το Redmi Note 8 Pro μου χρησιμοποιώντας Tapatalk
-
tbh I should carry small wire cutters. and an extra ph0 driver. and a lot of additional tools sine we're not supplied any at work. but that is exactly the point why i don't carry them
-
@Sakpan74Gr said:
Hi guys, I recently bought the Knipex Cobra XS and was impressed by its performance for its size. It's even better than MT pliers.
So I was wondering. Are there diagonal cutters of similar size but better than MT cutters?Klein Tools are good quality, and they make about half a dozen different diagonal cutters that are 4.25" / 108 mm long. Which one you select depends on whether you want tapered or pointed nose, spring-loaded or not, flush or semi-flush cut, etc.
https://www.kleintools.com/catalog/diagonal-cutting-pliers/diagonal-cutting-electronics-pliers
-
Kleins
Ideal
Knipex
JensenReally every company making electronics service tools makes small cutters too.
Sent from my iPhone using Tapatalk
-
I have the Knipex 140mm and 160mm Combination Pliers, which are cutting linesman's type pliers. Tough MT pliers usually only come on the heaviest of multitools. While I usually carry the LM Rebar, and have really used it hard, still, its pliers are cast stainless steel, not a forged tool steel. These cut most wire that I deal with on a regular basis (including mostly forms of steel fencing wire). Gerber cutters explode, and most other companies' offerings ding when cutting most of this stuff. These with most of my SAKs (and the LM Rebar) still come out to being a lighter load than the HD multitools I own from Gerber, Leatherman, SOG, Victorinox or Schrade USA.
I strongly recommend the 140mm for pocket carry. I bought them by accident forgetting they were 140mm and not 160mm (intending to buy a spare), but they are wonderful in a pocket, while the 160mm are very bulky. Between the 140mm Combination Pliers and 125mm Cobra pliers a SAK, and a tool like the PocketWrench II, pretty darn much everything you need is right there ready.
I like Klein as we have two stores nearby (electrical supply and an Ace affiliate) where I can just go by and pick them up. Knipex is just as good, but they do things like the Cobras the others don't.
-
When I think of Diagonal Cutters I am thinking of cutting Wire and Cable and electric or electronics things but certainly not steel fencing and hard thick solid wire so maybe depending on the material the suggestion for cutters would change too.
Combination or Linemans pliers also generically called "Kleins" in a lot of trades are much bigger in general than Dikes are in my experience at least and are more appropriate to the task of the bigger stuff usually for sure.
So I guess it boils down to what the OP needs really as much as anything else but I was only really thinking of really small diagonals sized to match smaller Cobras in general.
These are 6" Kleins next to 125mm Knipex

These are a set of Snap On pliers that I really like and Knipex makes a similar set but the ones I have seen are bigger and I like the size of these for carry

This is a 180mm Knipex and an Orbis angled head diagonal I think made by Knipex also and this is a really handy set though a little larger too

@cody6268 said:
I have the Knipex 140mm and 160mm Combination Pliers, which are cutting linesman's type pliers. Tough MT pliers usually only come on the heaviest of multitools. While I usually carry the LM Rebar, and have really used it hard, still, its pliers are cast stainless steel, not a forged tool steel. These cut most wire that I deal with on a regular basis (including mostly forms of steel fencing wire). Gerber cutters explode, and most other companies' offerings ding when cutting most of this stuff. These with most of my SAKs (and the LM Rebar) still come out to being a lighter load than the HD multitools I own from Gerber, Leatherman, SOG, Victorinox or Schrade USA.I strongly recommend the 140mm for pocket carry. I bought them by accident forgetting they were 140mm and not 160mm (intending to buy a spare), but they are wonderful in a pocket, while the 160mm are very bulky. Between the 140mm Combination Pliers and 125mm Cobra pliers a SAK, and a tool like the PocketWrench II, pretty darn much everything you need is right there ready.
I like Klein as we have two stores nearby (electrical supply and an Ace affiliate) where I can just go by and pick them up. Knipex is just as good, but they do things like the Cobras the others don't.
-
I think I am going to order the Knipex 70 01 110, because they appear to be 5th pocket friendly. Has anyone used these?
Στάλθηκε από το Redmi Note 8 Pro μου χρησιμοποιώντας Tapatalk
-
@Sakpan74Gr said:
I think I am going to order the Knipex 70 01 110, because they appear to be 5th pocket friendly. Has anyone used these?Στάλθηκε από το Redmi Note 8 Pro μου χρησιμοποιώντας Tapatalk
I can't say that I have. However, I own a handful of other Knipex tools. I think highly of them, and wouldn't hesitate to purchase anything from Knipex I thought would meet my needs.
-
Which pocket is the 5th pocket exactly?
@Sakpan74Gr said:
I think I am going to order the Knipex 70 01 110, because they appear to be 5th pocket friendly. Has anyone used these?Στάλθηκε από το Redmi Note 8 Pro μου χρησιμοποιώντας Tapatalk
-
The small one on the right side, with the pliers showing.

Στάλθηκε από το Redmi Note 8 Pro μου χρησιμοποιώντας Tapatalk
-
Ouch!
That looks like nothing but painful to me?I wear Carpenters pants every day mainly so that I can carry my usual full sized diagonals every second that I am working but I also am working every second with wire and wire fasteners too so it just makes sense for me too.
@Sakpan74Gr said:
The small one on the right side, with the pliers showing.
Στάλθηκε από το Redmi Note 8 Pro μου χρησιμοποιώντας Tapatalk
-
I just lifted the pliers so as to show the pocket. Normally they disappear. So, no pain!
Στάλθηκε από το Redmi Note 8 Pro μου χρησιμοποιώντας Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login