Half Multiforce
-
I think that I have caught the modding fever and I
it :DBeen looking over all of the modding threads looking for ideas. Seen that quite a few people have constructed half Waves, half Surges, and half Charges (Poncho has a half Charge that I covet
). I like what I have seen, but I lack the source material to make one for myself. Well, actually I do have one used Surge, but it seems to be a bit heavy for a multi tool pocket knife. But I do not have a Wave or a Charge since I prefer the PST/ST branch of Leatherman MTs.I was thinking about looking for a used Wave/Charge, but then I realized that I have a very good copy of the Wave already: the Ozark Trail Multiforce

The scissors and can opener are top notch, the saw is as good as the saw that comes with the ST 300, the blades are fine, and it has a 1/4" bit holder (a big plus for me). I have found the file to be okay, though the consensus seems to be that the Wave's file is better. Finally, it has a large straight driver. And oh yeah, all the tools lock except for the bit holder.
I used the handle containing the scissors et al. I found that it was easy to add the bit holder in the pliers end of that handle. With a minimal amount of grinding, the bit holder engages the pliers' backspring while inline with the handle. Though the bit holder does not lock, I bent the backspring a bit so that there is a lot of resistance to folding up. Certainly much more than the Gerber Armbar Drive. The bit holder with bit overlaps the scissors and has to be opened in order to extract the scissors, but that is not much of a problem.
I like the saw a lot, but chose to install the file instead since I have a saw in my Klein/Blackfire MT. I chose the plain edge blade over the serrated edge, but shortened it since I prefer a blade without a belly.
I decided to try to jazz up the scales a bit. I first etched the scales using salt water, cotton swabs, speaker wire, and a 20 volt cordless Craftsman battery, and then I used a brass brush in my rotary tool to brush some of the etching out. The scale with the clip turned out a bit better than the other scale. I may give it another try in the future.
Here are some pictures:




-
Very nice! If you don't often need pliers, this is a great option for having just the other options available, in a slimmer tool.

-
Darn it.
Now I'm gonna want to do mine.
Nicely done. -
Oh wow :ahhh That thing is great :o Love the toolset on it and I may have to buy one to make myself one as well

-
@pfrsantos said:
Very nice! If you don't often need pliers, this is a great option for having just the other options available, in a slimmer tool.

Thanks!
I use pliers during the work week, and I like having a pliers-based MT with me to serve as long nose/needle nose pliers. But when I am not at work, I don't need pliers often. So having a slimmer tool at those times is desirable.
-
@PitCarver said:
Darn it.
Now I'm gonna want to do mine.
Nicely done.Thanks!
-
I worked on the scales again tonight. I decided to copper plate the scales. I don't have the proper power supply, and I didn't even have the proper chemicals or equipment to plate copper onto stainless steel (typically a nickel layer is plated first since copper won't bond to the passive layer on the surface of stainless steel). However, if your goal is for an interesting look rather than a proper layer of copper, then it is possible to achieve a decent result with crude instruments.


-
-
@Adam5 said:
I worked on the scales again tonight. I decided to copper plate the scales. I don't have the proper power supply, and I didn't even have the proper chemicals or equipment to plate copper onto stainless steel (typically a nickel layer is plated first since copper won't bond to the passive layer on the surface of stainless steel). However, if your goal is for an interesting look rather than a proper layer of copper, then it is possible to achieve a decent result with crude instruments.

:o Even more awesomer :ahhh :ahhh :ahhh

-
@Adam5 said:
I worked on the scales again tonight. I decided to copper plate the scales. I don't have the proper power supply, and I didn't even have the proper chemicals or equipment to plate copper onto stainless steel (typically a nickel layer is plated first since copper won't bond to the passive layer on the surface of stainless steel). However, if your goal is for an interesting look rather than a proper layer of copper, then it is possible to achieve a decent result with crude instruments.

Now that's purdy. I'd be happy to keep the stainless look if I ever get around to doing mine, but that copper is mighty nice.
-
Nice!
these half tools comes in real handy alot of time. I carry one also so it compliment any other plier based MT I chose for the day. -
the main reason I built my first one is to compliment any set of plier based tool that I wanted to carry

-
-
@ReamerPunch said:
That looks great, Adam!

/post/2158648

Thanks RP!
I should have provided the link to your can opener thread since it was your test I had in mind when describing the quality of the opener. -
Predictably, the copper did not hold up well on the side opposite the clip. That side has to ride against a sweaty leg all day.
So, I tried my hand at DIY black oxide using ferric chloride. The scales are dark gray instead of black, but they do provide contrast against the stainless steel tools, which is what I wanted. It may not look as good as Poncho's Charge knife, but I am happy with it.


-
I think it looks awfully nice
Very cool contrast now 8)
So nice in fact I may have bought a Multiforce myself
:DIt is actually not that bad of a tool and I am not sure If I want to take it apart now :ahhh
-
@Poncho65 said:
I think it looks awfully nice
Very cool contrast now 8)
So nice in fact I may have bought a Multiforce myself
:DPersonally, I think it is one of the better MTs available.
It is actually not that bad of a tool and I am not sure If I want to take it apart now :ahhh
I probably would not have made this one into a knife if I did not have a second one

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

depends on how good your eBay-fu is ;) :D