Badge request: paracord
-
Nice paracord fob Farmer X! I usually finish my snake knot fobs with a diamond knot, but I'm interested to see your new method.

-
Its really nice, that in it's simplicity, a paracord fob doesn't need to be complicated to look good
Thanks for posting.
-
Thank you for the accolades, Kraken and PitCarver!
As regards my new method of finishing the ends, it involves partially gutting the cord before melting the ends. My technique and method could still use a little refinement. But it gave me an excuse to finally try out SAK pliers. Oh, and I can't tie a diamond knot to save my life!
-
@Farmer X said:
Thank you for the accolades, Kraken and PitCarver!As regards my new method of finishing the ends, it involves partially gutting the cord before melting the ends. My technique and method could still use a little refinement. But it gave me an excuse to finally try out SAK pliers. Oh, and I can't tie a diamond knot to save my life!
Here's the video I use each time I tie a diamond knot:
I found it to be the most straight forward method. -
@Farmer X said:
Thank you for the accolades, Kraken and PitCarver!As regards my new method of finishing the ends, it involves partially gutting the cord before melting the ends. My technique and method could still use a little refinement. But it gave me an excuse to finally try out SAK pliers. Oh, and** I can't tie a diamond knot to save my life!**
Just get some paracord and tie/untie it until you get the hang of it. It was difficult at first for me, too, but now I can awlmost do it with my eyes closed.

-
I like the snake knot as well. Badge awarded.
-
@pfrsantos said:
Just get some paracord and tie/untie it until you get the hang of it.I've done a few of them, but usually I make a mess. I'll keep trying. Eventually I'll get it down consistently.
Awesome. Thank you!
-
Congratulations on your badges

-
Congratulations!

-
Thanks, y'all!
I've finally got some photos of my new way of melting the ends. So's I'm not making multiple posts, I decided to condense the photos of the process into a collage. Hopefully I didn't violate any forum rules there. How I do it:
- Pull the kern (outer sheath) back about half an inch (12-13 mm) and cut away the exposed mantle (inner strands/"guts").
- Hold the end in a pair of pliers and melt it.
- Before the end cools, give it a squeeze with the pliers.
- The end result. The end on the left was the one I photographed during the finishing process. It doesn't look nearly as good as the end on the right. Even with benefit of a tripod, I'm not the best at taking photos while also performing such a task.
The completed lanyard/fob is also shown. It will be attached to a new SAK on Tuesday.


-
Nice work!

-
Thanks, Rizio! Less than 24 hours before it gets attached to a new SAK.
-
As I can't modify the post preceding this one anymore, I'll have to make a new one.
A couple-few hours ago, I took another shot at the diamond knot. My attempts with kelly green paracord had me getting perturbed, and that piece was not going back in the bag, so it turned into a key fob. The second attempt was a little more successful. I'm having issues with the loop twisting, but I'm satisfied enough with this diamond knot that the mini lanyard is now on a knife. I believe the pattern is called "firecracker."


-
That's a good looking diamond knot!

-
The twisting is hard to get around FarmerX.
You have to strengthen it out as you tighten the knot. -

I dont know the name of the knot I use for my lanyards but its one I enjoy.

-
I don't know the correct name, Aloha, but I call it a noose knot.
Wait a second.
Stop the presses, looks like it's called a "Reeves Coil Knot".
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

