Having a Blast (Cover Version)
-
The original verison of "Having A Blast (Revitalizing A Blast)" by Poncho65 can be found here.
I bought two Blasts for parts. I robbed most of the parts from one of them, leaving behind the plier head and PE blade. The handles of the second Blast looked okay, enough so that I decided to fix the second Blast. The main problems, beside rust, was that the saw blade was broken, the PE blade was badly worn, and it looked like someone had cut a live wire with the pliers:

Did I mention the rust? (The replacement blade, saw, and plier head can be seen in this photo)

So:
Soak in degreaser
Rinse
Soak in rust dissolver
Rinse
Clean with rotary tool and stainless steel brush and nylon brush
Use higher grit sand paper to remove as many scratches as possible from handles
Modify handle to make a clip from a Mossy Oak MT work (involved drilling a hole in the proper spot to allow the anti-rotation nib(?) to fit into the handle)
*Repair and modify Multiforce saw blade to fit Blast
Replace Phillips driver (to be used in another mod) with Multiforce bit driver)
Rearrange toolsVoilà!

(Revitalized Blast on right)



*I had previously tried to decrease the pivot hole of the saw blade by hammering a piece of 4 awg copper wire to fill in. That method had worked for me previously, but not with the saw blade. For this mod, I used a silver solder that is made to use with stainless steel. It is unclear if the solder will hold up, but it did survive cutting a few tree limbs this morning.
-
Great job !

-
Just seeing this thread now :ahhh that is awesome and lots of great pics

-
Looks Good!
-
That is a very nice professional looking restoration -

-
Thank you guys

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
