Disapointment
-
20 replies so far, and only two of them on topic. Mike and Ben will be so proud! :'( :D
-
Ahem.... I hope no one minds if I post something about the actual topic at hand? ;)
I was drooling like a rabid monkey over the Charge when I first read all the rave reviews for it on this place. I wound up getting a cheap New Wave instead, but my thoughts were pretty similar to yours. I love almost everything about it except for the inside tools.
I am seriously thinking about swapping the bit driver for a dedicated phillips driver though, as others have done. I think it might even become my EDC with that change.

-
@Nutznboltz said:
With just one handle left for components I felt Sog could have done a better job. I really don't need a v cutter when theres a serrated blade available and the handle with the AO blades seems busy and uncomfortable with the blade release button and blade lock. I am starting to edc this tool more to give it a chance but these were my initial impressions.True, with two blades, the v-cutter really isn't necessary on the PowerAssist. Thankfully SOG features interchangeable tools. Keep in mind this is SOG's first attempt at an assisted-opening multitool so maybe they'll improve the design and tool arrangement in the future.
-
I got an MP600 I wasn't expecting to much from it but it was still better than I thought :o :D I still can't get past the stubby drivers :ahhh I got it at a good price though ;) Normally I am happy with my choices for one reason or another
Haven't met a LM I didn't like ::) :D
-
I'm going to say something and then run OK?
I felt like this about the PST

I had carried a Supertool for a few years and then saw a PST come up for a good price. With its non-locking blades it makes for UK legal EDC and it's not that much smaller than the Supertool, right? When I got it I was left feeling :-\ it felt far to light and the bare edges dug into my hands far more than the ST. Now we all know this about the PST but I never got past it. I've owned it for about four years now and have maybe carried it half a dozen times, and every time I have I get that :-\ feeling. The good news is that I have decided to give LM another chance and I'm liking my Fuse and Blast far more. :)
-
@Gareth UK said:
I had carried a Supertool for a few years and then saw a PST come up for a good price. With its non-locking blades it makes for UK legal EDC and it's not that much smaller than the Supertool, right?Err .... nope.
Technically yes, the main difference in the closed position between the PST and the Supertool is a half-inch, but in practice that size difference makes for a world of difference in utility.
For a while, the P in PST stood for Pocket, and that's the key for me. It was always intended to be a light pocket tool, whereas the Supertool was for the big jobs.
-
I had carried a Supertool for a few years and then saw a PST come up for a good price. With its non-locking blades it makes for UK legal EDC and it's not that much smaller than the Supertool, right?
Technically yes, the main difference in the closed position between the PST and the Supertool is a half-inch, but in practice that size difference makes for a world of difference in utility.
That's the bit I hadn't realised and was so disappointed with when I got it. Not actually the fault of the tool, just my expectation of it.
-
That happens a lot on here tbh.
The Surge is the one that people are often disappointed with, you either love it or hate it, I think I might be the only one who doesn't have a strong opinion on it! But although the things that people post on here are well intended, sometimes things do get built up a bit too much. Now you're a wisened chap like myself (;)) but imagine if your entire knowledge of tools came from this site. You could be forgiven for thinking:
- That nothing made in Switzerland can rust;
- Anything made in Portland is guaranteed to rust;
- There are about 1000 different definitions of the word "quality", and you can pick and choose them to suit the particular argument you're having at the time;
- All Gerbers are rubbish and may explode;
- Any tool not made in the USA or Switzerland is of poor quality (see note 3);
... etc.
:D
-
- All Gerbers have stubby drivers.....
see Recoil for debunking of this myth
-
I have said this many times before, but for me it was the original LM Wave (a lot of people are groaning now :D ). I had seen this as the tool to have for a very long time and I think I had built the hype up too much as when I got it I was really disappointed. It flexed, the liner locks were simply awful and IMO unsafe, and it had more flat head drivers on it than I had in my tool box. Luckily LM went and sorted this all out on the newer Wave

-
- All Gerbers are rubbish and may explode;
They can explode :o That would be so cool, might have to get one now :P
Victorinox Voyager Lite. I really liked the idea of the alarm and such on the scales (I don't wear a watch). The electronics are clever and the one button interface works but what's with the lack of a backlight :(
More importantly I disliked the rough translucent scales. I hoped they'd grow on me but nope, still don't like them. Since then I've handled other models with the electronics and I still don't like them, yucky things >:(Neil
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

:D
Yay!!!! :D