Skeletool Challenge
-
@nakken said:
Good luck with the challenge, ElevenBlade
Day 29
I used the Skeletool to remove a lamp and its socket. The carabiner was helpful as I could just hook it onto my belt loop while working over my head

[attach id=0 msg=2396919]
[attach id=1 msg=2396919]
Great pics and usage, nakken! I only tried the carabiner on my pants one time to test it, but it would certainly be more handy to clip it for easier access and I will need to try it. I also have thought clipping it to a convenient location next to or on the project could be helpful. I am worming overhead often enough and a simple screw or nail would do the trick.
-
Day 30
The one tool I did not use much was the pliers. I was a little surprised by that, but never came up for some reason.
Rich, thanks for setting this up. It was a great challenge and I had fun. I have not regularly been a carrier of my Skeletool and I can see more days in my future rotation or as an additional secondary knife/MT to compliment a larger tool. I did miss my awl, saw and file but other than that, this tool covered everything else nicely. I really like the bit exchanger with its spring assisted retention...I wish LM would add that to all of its MTs with the bit exchanger... adds for confidence that i will not lose a bit in some dark recess. The CX was not as comfortable as other variants of LM MTs when using the driver. Nothing horrible or that would prevent me from using the tool in the future, but I found some hot spots and it was noticeable when driving several screws.
Thanks again for a great challenge!!

-
@MrToolJunkie said:
Day 30The one tool I did not use much was the pliers. I was a little surprised by that, but never came up for some reason.
Rich, thanks for setting this up. It was a great challenge and I had fun. I have not regularly been a carrier of my Skeletool and I can see more days in my future rotation or as an additional secondary knife/MT to compliment a larger tool. I did miss my awl, saw and file but other than that, this tool covered everything else nicely. I really like the bit exchanger with its spring assisted retention...I wish LM would add that to all of its MTs with the bit exchanger... adds for confidence that i will not lose a bit in some dark recess. The CX was not as comfortable as other variants of LM MTs when using the driver. Nothing horrible or that would prevent me from using the tool in the future, but I found some hot spots and it was noticeable when driving several screws.
Thanks again for a great challenge!!
Nice challenge review

-
Great closing thoughts, guys

Badge awarded for MrTJ and Rich
congratulations both of you

Anyone else whom hasn't requested the badge and deserves it, go ahead and request it and we will get awarded to you
:D -
Anyone else would be me, but I joined the challenge a day later :D I'll post a picture and a request tomorrow. Congrats Rich and MrToolJunkie

-
Great job guys!

-
Thanks guys! And we're with you to the end, nakken 
-
Congratulations Rich and nakken!
Thank you Poncho for the speedy award!!!
-
Top work awl, excellent challenge

-
-
This was a great challenge to follow. I now see the similarity between the Skele and my Freestyle, and hopefully I'll be able to add one of those spiffy red RX models to my fleet sometime. Great job, y'awl!

-
The RX is not just a looker, the blade is a real monster for chewing through tough materials.
-
Day 30
I agree, Farmer and Crunchie. My favorite thing about the RX is the rounded tip. This makes it less likely to stab someone while cutting off their seat belt, and even gives you the possibility to run it inverted inside someone's clothing, functioning as shears. (Comparison below)
[attach id=0 msg=2397142]
I know that many people dislike combo edge blades, and for regular sized multitools I would also rather have one fully serrated blade and one plain edge blade. But for a small tool like the Skeletool I think it makes sense and it works very well. Tools like this is for me more of an EDC thing, you have it when you need it, like e.g package opening (my number one use). Admittedly, after seeing the CX's in this challenge, I might get one if those as well.
It has been a fun challenge, a big shout-out to those who have stopped by along the way. I carry a Skeletool most days anyway, but the biggest challenge has been to find something to take pictures with and actually capturing uses.
Thank you all


-
Great closing thoughts on the Skeley, nakken

Badge awarded
Congratulations

-

Congratulations on the badges, guys

-
Thank you, gentlemen

-
Congratulations, guys!!!
-
Bummed I missed this Challenge.
Love me some Skeletool!
Congratulations to those who completed.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login