My 3DC
-
Yeah, I know it's EDC, short for Every Day Carry, but in this case, it's not.
If you are even remotely familiar with 3D printing you know of sites like Thingiverse, Printable and the like. On these sites you find a myriad of different things you can print, including various tools and EDC items.
In this thread I'm going to explore some of them and see if they are any good.
So far I have printed two such items, one of which I broke almost instantly and will try again with before reporting on it.
The other is this watch stand, which is probably the first of many given the sheer number of watches I have.

I believe this is the STL i used- I'll be sure to be more diligent in posting the associated links in th future.
https://www.thingiverse.com/thing:5072578
The white residue is remnants of stick glue from the bed, and will clean off easily, but this is what it looks like straight out of the printer.
I really wanted a watch stand for my Solar G Shock to ensure that it stayed fully charged, and I think this stand would work really well.
Overall the stand is an okay design, if a bit simple. If it had been my design (and I'm not much of a designer) I'd have skeletonized it a lot more to conserve filament and sped up the print time.
That having been said, it is a nice and easy to use stand, and seems quite stable and printed well. In the end, it will do the job nicely.
Def


-
For anyone interested, I am using an XYZPrinting Mini W+, which is an entry level, user friendly and inexpensive printer with a print volume of 5.9 x 5.9 x 5.9 inches and PLA plastic for the print.
I'll clean this print up a bit later and post actual finished photos of it then.
If anyone has any questions or suggestions for printed items you would like to see tested, feel free to let me know!
3DC is here to stay!
Def


-
Very cool! I have wanted a 3D printer myself and may try to get one sooner rather than later :ahhh

-
This is my third one, and I've given the other two away. My recommendation is to get one with auto bed leveling. That is the #1 issue I have had with them was spending a while leveling the bed and then it still messing up due to the heated bed expanding and going out of whack again.
I tried another watch stand last night- it's much lighter and smaller than yesterday's one, and there are things I like and dislike about it.
Def


-
It uses a lot less filament and prints faster since there's less volume than yesterday's model, but it doesn't seem to fit the watch quite as well.
Still, it works well, and being a lighter design it fits the Luminox Blackout nicely, since it too is a very light watch, thanks to its carbon fiber case.
Here is the stl:
https://www.thingiverse.com/thing:4936351
I'd definitely print/use this one again, even though it seems a bit too small for big, chunky watches. It will hold them well enough, and I don't feel like it is going to fail or anything- it's just an aesthetician thing. Putting a 45mm tuna can type watch on this would make it seem out of place.
Otherwise, it's a nice little stand.
Def


-
You could use a cut-out of MTo's logo. It would save filament and look even cooler.

-
It's on the list, I just need to get a bit better with design software to get there. :D
Def
-
Another enabler.
As soon as you start printing some of them tools and EDC items I'm gonna want one too. I've just got so much stuff, now, that the Boss Lady is starting to protest.
-
Last night I decided to get a bit ambitious and print a Surge Sheath- specifically this horizontal one:
https://www.thingiverse.com/thing:3531449
a bit of a caveat here- I don't like hard wallets and I don't like hard sheaths.
That said, I love many tools that I thought were idiotic at first, and I am happy to change my mind about things. I am wrong often, and I'm okay with that.
So, going into this with an open mind, I fired up ye olde 3D printer and banged this one out. The printer did a great job on this one, and the print came out absolutely perfect. I was really impressed with this one and I was really starting to look forward to carrying and using this one.
My first test was a bit of a fail though- I tried quickly found the loop on the print was a bit too small for my belt.

No worries, I have thinner/smaller belts so this isn't a deal breaker.
Def




-
I had read in the description of this STL (and the other Surge sheath I was looking at, also by the same designer) that the sheath was designed with the older Surge in mind, so I dug out my original Surge to see how it fit. Frankly, it looked pretty small for the Surge, so I decided to try the Wave first. The Wave was a bit loose (as expected) but not as loose as I'd think it should be for a much smaller tool in a sheath designed for a Surge.
It didn't fit.
I could only get the Surge in about halfway before it jammed up good.
Trying to put the original Surge in all the way resulted in the sheath breaking.

But, maybe I got it wrong- maybe the designer thought he had an older Surge and maybe it would fit the newer one instead. So, fitting the sheath back together I grabbed the MTO Million Post BO Surge and tried that.
Def




-
Much like the original Surge, inserting the New Surge caused breakage, first in the same position as the original, and then it snapped the little hook off the backside that the base of the handle is supposed to nestle into.
This week I may try increasing it by 5-10% and reprinting, but doing it straight up, this one just doesn't work.
Def


-
I wasn't quite ready to give up on the Surge sheath fail, but I wanted to try something different, so I decided to give the Gerber Belt Clip Holster a shot instead.
Because of the way this one was designed, I needed to add supports, which is basically a thin structure to support bits that stick out that can't be properly printed without something to print on- for example, if you wanted to print a capital letter T, you would need to print supports on either side of the vertical line to support printing the horizontal line.
This means the project uses more filament and takes more time, but as it ensures a better completed project, it's worth it.
I took some pictures during the print so you can see the inner support structure, and the outer "wings" of the sheath. Note that it is also being printed upside down, as that's where the flattest surface is.
Def




-
You will also notice the crosshatch pattern inside the structure. This is to reduce weight, the amount of filament used, and the print time- if one wanted more strength, they could increase the infill percent and use more material, but again, I am starting all of this with recommended settings. I have lots of time to fool around with it later! :D
This one printed at least as perfectly as the Surge sheath, and I as very pleased with the result.
My first test after removing all of the support structures was the belt test, and, unlike the Surge sheath above, this one passed. Not by much mind you, but then I wouldn't want it any looser. It fits well on my belt, as if it was made specifically for it. Apparently the designer wears the same kind of belts I do.
I then grabbed the Multitool.org edition Gerber Pro Scout and was happy to see that, while snug, the ProScout fit in it nicely. I like that it's snug, but at no point did it feel like it was stressing any part.
This is a very well designed sheath, and I'm looking forward to putting a bit of mileage on it. I wore it to the grocery store and it was a bit more comfortable than I imagined it would be.
I'd absolutely print this one again, at least at this point. But, we will see how it manages in actual use. I don't know how easy it is going to be to draw the MP600 when I need it.
One quick note- this won't fit a MultiPlier.
Def




-
Learned some good lessons with those sheaths designs

I like the different designs

I may have some design files somewhere of a bit holder that fit inside a Zippo
need to see if ai can find them and send them if you want 
-
Sure, I'm game!

Def
-
Found them and emailed them to your gmail

-
Got them safe and sound. I will look into them today, and see if I can dig up a Zippo somewhere too!
Def
-
The guy who sent then designed it and had it in a Zippo

It looked really awesome

It is probably for the LM flat bits
I forgot to mention that :ahhh :D -
It may look a bit ugly at first, but with some sanding to get the glue stick residue off it, I think this Apple AirTag MOLLE attachment is quite handy.
https://www.thingiverse.com/thing:5496065
It actually has two pieces- the main body as shown in the pics, and a retention ring that keeps the AirTag in it.
The retention ring doesn't seem to actually fit, but that's okay as the AirTag snaps in quite solidly and the strap holders are so tight that the holder won't come loose from the strap without a fight.
If you decide to print this one, don't bother with the retention ring. :D
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login