Replacement Leatherman Plier Pivot
-
I have had a number of Leatherman Plier MT go loose in the Plier Pivot and sent them back for replacement.
As I have started a number of mods, I no longer just want to send another one back.
Has any of the Brain Trust in the group ever drill out the pivot pin in a recent charge or wave to see if possible to find a replacement option.
Leatherman has obviously done it in the Garage #002 & #005 projects.
Looking forward to any ideas.
-
Not done yet, but a word of caution: in a LM the pivots and holes, depending on tool and location of the pivot, may not be entirely round but have a mostly cylindrical circumference interrupted by a planar face. This is to keep the pivot keyed to the handle, amongst others in order to reduce tool binding. Drilling this out would remove the keying feature and its advantages.
Why not simply tighten the loose pivot, possibly after applying thread locking fluid? There are so-called parsing tools around (forum member loki-mobile used to sell them - he is somewhat impeded at the moment but they may be around still).
-
I should have been a bit more specific, I was talking about the Pivot Pin on the Plier Head, not the pivots to the handles.
As the Leatherman Garage #002 and #005 have.
This way I can adjust as needed.
The issue is finding out the shape of the recess for the pin and possibly having to machine the hole to suit the pin.
All this without weakening the plier head.
Has anyone drilled one out to see?
-
There is a simple way to tighten them up.
/topic/66808
-
Thanks for that SteveC. I did try this but did not work as well as I had hoped.
Maybe I need to use a more domed punch or visit my father's workshop and use his press.
I will revisit, but still interested if anyone has dismantled the Plier head by removing the pivot.
Pictures would be great.
-
I don't recall ever seeing any drilled out
most either use the tap with a hammer method, twist the pivot method, send the tool in or just live with it 
I think once drilled out you aren't going to be able to put it back together without a new pivot and a press
perhaps an even more involved process than most would be willing to go through :ahhhGood luck if you try this and pics please

-
@mbischa said:
Thanks for that SteveC. I did try this but did not work as well as I had hoped.Maybe I need to use a more domed punch or visit my father's workshop and use his press.
I will revisit, but still interested if anyone has dismantled the Plier head by removing the pivot.
Pictures would be great.
I don't think drilling out the pivot would work. The pivot pin used by Leatherman would be hard to replicate.
The other method that Poncho mentioned.
/post/1606839
-
Thanks for that Poncho65 and SteveC.
I tried the Visegrip method and the pivot pin rotated really easy and did not change thee tightness, no matter which way I turned it.
Next I put the plier head on an anvil with the stationary side of the pivot pin on the bottom, and hit it with a punch about 2mm smaller than the pivot pin. This made no difference to the tightness of the plier head or the slop between the two sides of the jaw.
Then I got a stainless Steel bolt the same size as the punch I used in the last step and put a slight dome (1 - 2 mm from the centre to the sides) on the end, and gave it a hit with the hammer and got a little improvement and then again to get the tension perfect.
So my the plier pivot is nice and tight and the jaws of the pliers have no slop.
A little bit of playing around, but not too difficult for anyone to do and well worth while.
-
Glad you got it sorted
never hurts to ask anything because it is possible (especially here) that someone has had a similar problem
and hopefully have already found a solution 8) 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login