UK friendly SOG
-
Dudes and dudesses (have we any dudesses....I'm fed up of writing it :D),
OK, I am going to build a UK friendly Powerplier/Powerlock etc of some sort. As a result of this I can not have a locking blade on it.
What tools would you use to replace the knife and saw?
Remember it has to be UK legal and easy to fit.
Fire away gang

-
I'm putting together a PT-510 for my son's birthday. I'm hoping to pull the blade and add scissors. If there's room I'll also remove the punch down tool and add the 1/4" bit driver as well. No pics as yet, Dennis has strapped the bits I needed to a pigeon heading this way

Neil
-
The PPP and the Paratool don't lock.
-
Are you really wanting to do away with the knife and saw, or would you simply want to defeat the lock? (because defeating the PowerLock lock would be easy enough)
-
I use my UKPK as my dedicated blade....my swiss champ has saw etc etc....I just fancy a decent pliers system (SAK's pliers are light use only) and can fill the space on the SOG with other useful kit.
-
@Flash said:
I use my UKPK as my dedicated blade....my swiss champ has saw etc etc....I just fancy a decent pliers system (SAK's pliers are light use only) and can fill the space on the SOG with other useful kit.Ahh, very well then, may I propose a serrated line cutter?

-
That would still cause legal problems.
-
-
Flash, why not just carry around a LM Kick? They are cheap enough, and they have great drivers! :)
-
@Leatherman123 said:
Flash, why not just carry around a LM Kick? They are cheap enough, and they have great drivers! :)Probably because he wants a powerlock

-
Do you get enough tension from the spring to keep the blade/tools in place OK with the lock out of commission? This has stumped me when considering UKfying other locking knives.
Neil
-
@NKB said:
Do you get enough tension from the spring to keep the blade/tools in place OK with the lock out of commission? This has stumped me when considering UKfying other locking knives.Neil
Ahhh, good point. Perhaps grind the notch on a ramp, so that the tension is still there, but it doesn't "lock" open? (hope that makes sense)
-
Do you get enough tension from the spring to keep the blade/tools in place OK with the lock out of commission? This has stumped me when considering UKfying other locking knives.
Neil
Ahhh, good point. Perhaps grind the notch on a ramp, so that the tension is still there, but it doesn't "lock" open? (hope that makes sense)
That's a clever idea Bob, but you'd need to pretty damn accurate I think?
Flash, do something bizarre, like putitng a house key on there, or a USB Flash drive or a mini LED or a mag glass or something maybe? That would be pretty cool 8)
-
I think you can make the vertical face on lock notch the bar pull against into a ramp so it folds under pressure, sorta like a slip joint. May take a few minutes to tune in but would make it UK legal.
-
Has someone got a definition of what exactly a lock knife is? And do you know if the S.A.T is legal - eg, on the SOG Blink?
-
SAT is legal to own yes. Obviously the length of the blade and if it locks determines whether or not is is legal EDC without a good reason.
-
Thanks... the Blink is a tiddler so no probs there.
As for making the UK friendly SOG - take out all the scary sharp bits and replace them with a tiny Union Jack rolled up around a toothpick. Multipurpose too :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
