fixed plier multi tools
-
I know Def likes them but there are a lot of brands never mentioned.
I have a bulit, sheffield, and maxam all very cheap. the wire cutters bend around hangers easily.
there are also other good tools like swiss wenger, swiss gear, sog, endevour, kut master and vise grips.
I like the kut master series but never hear anything about them. I have three USA versions and one china made version. it is pretty nice for being china made.
I noticed some of the fixed pliers are conected below the wire cutters just like a leatherman is. right below the wire cutter is a round section were the two sides of the plier connect and pivot but some models are different and instead one side of the plier is short and only has the needle nose and plier cutter. it is held in place by two pins that go through the body of the tool handle. the other side of the tool contains the plier and below the wire cutter is the round section were the pliers rotate but in this scenario the other side of the plier is not connected to it. only one side of the plier is part of the round section. does that make sense? -
Swiss Wenger and Swiss Gear are actually called the SwissGrip (or WengerGrip) and the MiniGrip (or PocketGrip), and then there's also the IronGrip. Swiss Gear is a label attached to some of the other products Wenger manufactures, like backpacks, tents etc.
The big benefit of fixed head plier tools (and I have some cheapies too!) is that the head is stronger since it has less moving parts. Also, many of them are blunt nosed pliers, which I also have a preference for. The big drawback, is that they are big, and often bulky. I am willing to make that kind of sacrifice though, as I do like the robust, almost indestructible feel of them.

The SOG ToolClip is also an interesting beast, about as compact as fixed head plier tools get, and yuet still be sturdy enough to disassemble a Sherman tank. The, there's this old Depanneur tool that Bob introduced me to:

I'm also a big fan of CRKT's Zilla dn Zilla Jr- at current count I have four Zilla's and one Jr:

I'm not sure if you count them or not, but I also have the full sized and Li'l Guppie, which aren't pliers but still have the fixed head.

Still, I have to say that the SwissGrip is the ultimate in bullet and bomb proof multitools.

Between the beefiest pliers, folding machete blade and the biggest folding saw found on any multi, the SwissGrip is a force to be reckoned with, and made even more so by the addition of the various standard 1/4" screwdriver bits and locking on board screwdrivers. It's solid and it's versatile, which is a hard thing to argue with, but it's also big, awkward and perhaps the bulkiest tool available.
And, if you count the Guppie as having a fixed head, then you also have to include the Cool Tool:

And the SpydeRench and ByrdRench:
Wenger's IronGrip is also pretty sweet! :D

Def
-
I quite like them as there usually extremely robust, certainly the Wenger one's are

There not exactly compact though :-\
-
def,
do they still sell that french looking tool? no cool tool for me :(
is the red swiss gri difficult from the black in any way other than color?I mentioned swiss gear because they marketed their own tool made in taiwan that is larger then the pocket grip but smaller than the swiss grip. I have one :) good quality tool but not nearly as tough as the swiss grip.
-
That's interesting- do you have any pictures or other info on it?
I think the Depanneur is discontinued- Bob said something about them not being made since the 80's, but I could be mistaken on it.
The red SwissGrip is identical to the black one, except for the red scales. I have also seen (but don't have) a version with the corkscrew instead of the phillips head on the back, and I believe these came in both red and black scaled versions as well.
Def
-
this is inspiring, ill try to EDC my swissgrip sometime, the truth is that i havent even tried
-
I just have to get a red SwissGrip!! :ahhh :D
-
Get the Wenger mini grip while they are still around zzz.
-
I've been thinking about getting one of these for when I go back to work. I'm thinking either a Wenger or a Zilla... I would go SOG, but knowing myself I would probably be worried about breaking it, even though that would be near impossible (plus it ain't like I abuse my tools). I would go Spyderench or Byrdrench, but they seem much to complicated for me :o .
-
I have multiple mini grips. they are nice but not used a lot.
-
def
I will get some pics.
does anyone else have a kutmaster? -
I think Bob has a few Kutmasters, and I have seen them, but I don't have one.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login