Instructions for two-in-one layer?
-
I don't think there are step-by-step instructions but Syph's descriptions tell it all: use a short 91mm inline Phillips and reshape the tang to match the 93mm openers (that's the hardest part). Then use two 93mm opener bacsprings in opposite orientations and add the appropriate spacers (in my experience 1mm and .5mm) next to the Phillips.
-
@ComboTool said:
I don't think there are step-by-step instructions but Syph's descriptions tell it all: use a short 91mm inline Phillips and reshape the tang to match the 93mm openers (that's the hardest part). Then use two 93mm opener bacsprings in opposite orientations and add the appropriate spacers (in my experience 1mm and .5mm) next to the Phillips.This is spot on.
-
Thanks for the responses
-
Would anyone have pictures of the Phillips after filing it?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
