Can’t Align Pivot Pin
-
I have a Wave 1st gen that I replaced a broken blade, but I can’t get the pivot pin back in to the end of the pliers. I’ve read about some guide or assembly tool but I can’t find anything on a special tool. Can someone tell me where to find this guide tool and how to use it to get the pin back in? TIA!

-
You need to give pressure to align pivot on right place. I have used drill bit to give pressure on pliers pivot to get it in. its bit tricky but once you get bolt on pliers its easier to align rest
-
Hi wnsnacigator73, I use a tool called a Benchmade Pivot Alignment Tool that I got many years ago from a seller on Etsy. It is essentially a machined rod that has two different turned ends to fit different size pivots. The large size works to align the plier jaws and the smaller size woks with the tool side on Leathermans. It makes aligning all the washers, brass spacers, and tools easier.
In the absence of having the tool, I would try using a drill bit like Antti recommended or try using a punch to align hole to get the pivot bolt through. Good luck.
Welcome to the forum!
JonesE
-
Do you have a link to the vendor on Etsy who sells the tool? Thank you!
-
A drill bit will work with some fiddling, like friend Antti said. I have used a tapered punch successfully to line up all the stuff for reassembly. Not for Leatherman tools specifically. You run into the same problem with lots of different things. Best wishes. G
:ahhh -
@wnsnavigator73 said:
Do you have a link to the vendor on Etsy who sells the tool? Thank you!Here you go.
https://www.etsy.com/listing/802588665/pivot-alignment-tool-for-axis-lock
I am not sure of this forums policy regarding external links. Mods please delete if inappropriate.
If the link is deleted. Type Benchmade Pilot Alignment Tool into any search engine. The seller is RustBucketTools on Etsy. I am not affiliated with them.
JonesE
-
Clamp the frame in a vice, insert anything from the back side, wire or a drill of the appropriate diameter, insert a pivot and use it to push out "anything", if necessary, you can gently tap it with a hammer. No problem.
Here is my "Pivot Alignment Tool" :D
[attach id=0 msg=2533344]
-
https://www.etsy.com/listing/802588665/pivot-alignment-tool-for-axis-lock
I am not sure of this forums policy regarding external links. Mods please delete if inappropriate.
If the link is deleted. Type Benchmade Pilot Alignment Tool into any search engine. The seller is RustBucketTools on Etsy. I am not affiliated with them.
JonesE
I have one of these, but I'm not sure if it was from the same seller. I highly recommend getting one.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login