91mm taxonomy
-
Morning everyone
I am in the process of cataloguing my collection of 91mm. I have found you wonderful experts invaluable in helping me to understand what I have. I really like Jazzbass’ Taxonomy (/post/2003722 ) idea but don’t think this has been fully fleshed out in the forums. From what has been posted, and my interpretation I think we have
Post War PWAR 1946-1950
Early Vintage EVNT 1951-1956
Middle Vintage MVNT 1957-1962
Late Vintage LVNT 1963-1968
Transitional Period TRANS 1969-1973
Early Classical ECLS 1974-1979
Mid Classical MCLS 1980-1986
Late Classical LCLS 1987-1990I have taken some liberties with the dates between periods (to avoid overlapping years). Have I understood the approach correctly? How would pre PWAR and post LCLS be classified?
Cheers
Mark
-
So I always meant to post a more detailed version of this taxonomy, but... life gets in the way sometimes, doesn't it? Anyway, here's an abbreviated version of my thoughts on this:
I started collecting almost 20 years ago, and back then information was a LOT more scarce than it is now. Now a days we have a lot better info on what dates things changed, but I stand by the following: people who say they can date a knife to a specific month or couple months of a manufacture date are completely full smurf. Lots of times these hyper-accurate dates will be derived from dates found on commemorative knives. The problem with that is those knives - especially in older days - could have sat around for months or years before someone pulled them out and engraved a date on them. Also - and this is the big one for me - Victorinox is not a national mint or a car manufacturer that has very rigid production years where they build knives with very specific features, shut the factory down at the end of the year, and then retool for the next model year. So seeing a Huntsman with angled teeth on the saw and saying that "that was definitely made in the last three months of 1966" is complete BS. That saw could have fell to the bottom of a saw parts bin and picked up in 1968 and put into a knife.
Victorinox themselves has stated that they would 100% use older parts in a newer knife if they found them and the parts were compatible. So What I decided was to group the knives in my collection more based of appearance than "date". And what I came up with was a general classification of "eras" and "periods" that shared similar characteristics and group the knives into those groups. You can fit rough dates to these periods, but (at least for me) the exactness of the date doesn't really matter.
Here's what I came up with for 91mm knives. 84mm is similar but not exactly the same. I'm actually traveling in Germany right now so all of this is from memory. I'll fill in dates when I get back to the US later this week.
-
Era: Original (1896-early 1930s)
- Early Original (EORG): Large frame, 4 exposed pins, carbon steel, screwdriver instead of caplifter.
- Mid Original (MORG): Large frame, 4 exposed pints, stainless steel, screwdriver instead of caplifter
- Late Original (LORG): Large frame, 3 exposed pins, stainless steel, screwdriver instead of caplifter
These were my original groups for the Original era, but I've since learned that things aren't that easy. First off, all these knives were hand assembled, so sometimes you'll see a knife with stainless steel (i.e. made after 1922) that has 4 pins because - well the guy that made just did that. Also, stainless steel was expensive in the early days, so it was an option not a replacement for carbon steel. In fact, Victorinox made carbon steel 91mm knives well into the 1940s.
** Era: Wartime (Early 1930s-1951)**
Early Wartime (EWAR): Large frame, Caplifter, Fiber scales, Original can opener
Mid Wartime (MWAR): Large frame, Caplifter, Celluloid scales, Original can opener
Post Wartime (PWAR): Large frame, Caplifter, Celluloid/Cellidor scales, Crab Claw can openerI called this era "Wartime" because I originally thought that it started in the late 1930s. Turns out it probably starts more in the early 1930s. That said, this is a perfect example of why I personally prefer Eras/Periods over dates. New info comes out and you don't have to reassess all the dates you put on your knifes. Anyway, these are still large frame knives (i.e. the awl and the corkscrew are proportionally larger than those on the 84mm knives)
-
Era: Vintage (1951-1968)
- Early Vintage (EVNT): Small Frame, cellidor, exposed rivets, large awl, modern can opener/caplifter
- Mid Vintage (MVNT): Small Frame, cellidor, hidden rivets, large awl, modern can opener/caplifter
- Late Vintage (LVNT): Small Frame, cellidor, hidden rivets, small awl, modern can opener/caplifter
These are the most common "vintage" knives you see for sale. In 1951 Victorinox retooled the 91mm line to use the same backside tools as the 84mm line, allowing them more options in the 91mm line - the backside phillips introduced in the PWAR 84mm line is the big one. This is probably one of the biggest discontinuities in the entire 91mm product line - 91mm knives from the Vintage era and on are almost completely incompatible with older Wartime and Original era knives. The pin diameters are different, the backsprings are designed different, and the back tools are different sizes. Common to all Vintage era knives are 2.7mm main blades, clip point pen blades, scissors with no gap at the joint, +PAT on the can opener, and dark red brittle cellidor scales (for Victoria line; Elinox knives have cheaper lighter red cellidor).
Era: Transitional (1968-1973)
- Transitional (TRAN): There is only one period in the Transitional era because so many things were changing at the same time. What really indicates a Transitional era knife is the keyring attachment + 2.7mm Victoria blade. Typically there will be one or more tool design changes like those listed below.
The Transitional era is just what is says - a Transitional time between the Vintage era where knives had bails, 2.7mm blades to the Classical era with keyrings and 2.4mm blades. In this period the +PAT on the can opener disappears, the scissor design changes twice, files disappear from the Phillips, the metal file is redesigned to have a pointed tip, the fish scaler loses one of its bevels and gets measurements on it. The cap lifter loses its sharpened edge.
-
Era: Classical (1973-1991)
Early Classical (ECLS): 2.4mm main blade, drop point pen blade. Nickel Silver inlay on logos*. Scissors have small screw attachment.
Mid Classical (MCLS): Scissors with large screw, SS inlays, small V in Victorinox stamp
Late Classical (LCLS): Awl with hole, Large V in Victorinox stamp, cap lifter with half stopAll Classical era knives have the keyring attachment on the pen blade separator. The ECLS is noted for its Nickel Silver inlays execpt for a short period where they seemed to experiment with SS, but the early SS inlays used the same stamps as the NS ones and the quality is not great (jagged edges, etc). In the MCLS period they redesign the stamps for the logos and SS inlays become the norm.
Era: Contemporary (1991-2004)
Early Contemporary (ECMP): Scissors with screw attachments, keyring moved to opener backspring w/o half stop lock nub
Mid Contemporary (MCMP): Scissors with rivet.
Late Contemporary (LCMP): Scissors with rivet, opener backspring with half stop lock nub. Toothpick with the hook.The Contemporary knives are the last 91mm knives with the full 2.4mm main blade tang. There are also changes to the metal files and pliers in this era. One of the big challenges in this era is that the distinguishing features are really based on the opener layer and scissors, so knives without either of those (i.e. the Compact) can be harder to classify. For example, a MCMP and LCMP Compact will be almost the same.
Era: Modern (2005+)
So I originally developed this taxonomy in 2010 when the Modern era was only 5 years old and there weren't many changes yet. IOW, anything with a 2.0mm main blade = Modern. Now 20 years on, there are many more changes we can use. I'm still working out exactly what these are, but here's what I have so far:
Modern 1: 2.0mm main blade, 4 line VSSR tang stamp
Modern 2: 2.0mm main blade, 3 line VSS tang stamp with tall V
Modern 3: 2.0mm main blade, 3 line VSS tang stamp with short V
Modern 4: 2.0mm main blade, 3 line VSS tang stamp with short V, bronze scissor rivet -
That's all I can recollect from memory while sitting watching morning traffic in Stuttgart. Some of my dates may be a little off. I'll post more info with some pictures when I get home have access to all my resources. Last thing I'll say on this - this taxonomy was made over 15 years ago and probably needs some updates in areas. Also, I made it really just for my own edification to define how I wanted to collect knives. If you find it useful please feel free to use/make suggestions for improvement/etc. If you think this level of classification is unnecessary, feel free to ignore.
-
Very interesting and informative thanks for all your work on this

-
Thanks Jazzbass,
This is fantastic and fits in very well with how I view my growing collection.
Cheers
Mark
-
Very interesting posts—thank you.
I see it much the same way as Jassbass. Precise dating isn't possible—something that isn't always feasible with modern knives, either. Even soldier's knives with a year stamp are often produced the year prior; for instance, a knife stamped "08" might actually have been made in 2007.
It’s even trickier with vintage knives. You often have to weigh various criteria, as a single one isn't enough on its own. I find tang stamps to be a pretty good indicator—usually better than just looking at materials or tools. When dating a knife, the question also arises: do you want the date it was sold or the date it was manufactured? Surplus stock—whether complete knives or just individual parts—can sit at Victorinox for years before being assembled or sold in a shop. That’s how I recently managed to find "Golfer" models with long nail files, or the "First Mate." However, the parts themselves—specifically the long nail file—originated from an earlier period, unlike some of the other tools. It was a similar story with old Officer's Knives: Victorinox would supply blanks and parts to small cutlers, who would then finish the knives. Ultimately, the question is whether determining a knife's exact date really matters. For me, collecting and comparing different knives is far more interesting. There are so many variations. Of course, it would be great to be able to assign every part to a specific era, just as you can with vintage watches. Unfortunately, that isn't possible. Personally, I now categorize them only broadly into "vintage" (pre-1973 approx.) and "modern" (post-1973 approx.). I find vintage models interesting, but modern ones less so. -
@elsinox said:
Ultimately, the question is whether determining a knife's exact date really matters. For me, collecting and comparing different knives is far more interesting.I feel exactly the same way. I developed this taxonomy as a way to get away from the "What year/month was this knife made" and focus it more on the variations of the knives. It also influences how I collect - for example, I think "I'd like a nice Craftsman from the EVNT period" and then look for one. There are a lot of interesting variations within that period - at the beginning the stamps were "Armee Suisse", then "Victoria Officier" in large letters, then "Victoria Officier" in smaller letters. The wood saw changes a couple times. The can opener stamp goes from "US PAT PEND" to "+PAT" in large font.
To me, these sort of place the knives relatively in that period of 1951-1958. But I have seen knives stamped "1960" that have the large Victoria Officier stamp. Did they find an older knife from the mid 1950s and stamp it 1960? Did they make the knife in 1960 using older stock? Did the knife originally have a small "Victoria Officier" blade and get returned for repair and they used an older blade? There is literally no way to know and - to me - it ultimately doesn't matter.
The way I view the knives is I break them down into a relative period (small frame, exposed rivets = Early Vintage or EVNT) and then think about the variations within that period.
-
I should try and turn that into an Excel file, with the different periods showing along groups of cells, so it's easy to see the overlaping. If only I wasn't lazy...

-
Very cool info located here. Many thanks to all involved.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login