Restoring my Supertool
-
Hi Jackomation, welcome to

I would try to match the radius at the heel of the blade to make a template, if there is any of the original hollow grind left. But I am sure the experts will be along shortly

-
First off, welcome to the forum Jackomation. I am sure someone will be along to let you know about the radius for the hollow grind. Overall, your SuperTool looks to be in a good condition. It would make a great daily carry.
JonesE
-
I am sorry, I do not have the requested info either, or do I have the precision knowledge to fully understand the use of that information.
I do have experience restoring an edge to a misused blade to restore useable function that I may require.
Restoring a sharpe edge will require a consistent angle on each side working slowly. Restoring a choil may assist you. Here is the picture of my ST PE blade’s choil. Shallow but present. Since yours is gone, this may provide you a reference.
[attach id=0 msg=2582306]And here is picture of the entire blade,
[attach id=1 msg=2582306]Hope this may help.
Another option may involve locating a replacement blade or a donor tool.
It appears at least 1/16” of blade material has already been removed with an aggressive grind at the curve.
I see some folk will end up with a recurve blade by approaching to quickly.
Also, from spine to edge my blade is 9/16”.
[attach id=2 msg=2582306]Wish you well!
And welcome to MTo.



-
Restoring the choil before grinding the new edge makes sense:) will do this. -
These blades are thin to begin with. If you start trying to grind on them to restore the original profile, you are likely to end up ruining it. If it was me I would take something like 600 grit carbide paper and try to take out the ugly marks that someone left. Might have to use 400 first. Get them looking good and get all the scratches out. Then I would try to get a working edge on the blades. Hard to tell from the looks of that serrated blade. Looks like they might have ruined that one. A skilled hand could recut the serrations. Need some skills for that. Replacement is always an option. Looks aren't terribly important if you plan to use the tool. Good working edge on ugly blades still works.
Best wishes. G

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
