Single-wing Wingman
-
Damnit. This thread is making me feel like the only kid at school without a pair of the latest "must have" trainers. :'(
-
[quote author=Kampfer link=topic=56409.msg1008215#msg1008215 date=1418680868]
I left out the scissors mod, as it only adds complexity and get in to way of other tools.Not at all mate, the scissors are one of the tools that actually sit and fit surprisingly well. Look at my photo on page one, it's pretty much perfect fit, I don't believe LM would get the scissors integrated better. They're definitely something I'd suggest people try installing.
I tried it, didnt like it. Plus wave scissors can not match Micra which I carry anyway.
do you still want me to send you the spare Wave scissors, Kampfer?

Please do, I need it for another mod. Sorry cap.
[/quote]Oh no worries at all.

-
So... I've been playing with this mod and...
I am pretty solidly convinced that modifying the drivers to fit into the 'front' where the plier heads was without removing the plier retention spring is better than removing the plier retention spring.
Certainly not FASTER, but better.
Losing all retention on the drivers really limits their usefulness, IMO.
Otherwise... I think this makes a handy little package. It's about the same size (minus protruding bolts and pocket clip) as the Vic Farmer, and packs in about as much useful function. I assume that the Sidekick's saw, with some major work, could be made into an inside folding tool. You might have to lose one of the file/can opener/ serrated blade slots to make it fit, though.
-
Awesome work, Dr. Zoidberg!
-
@Kampfer said:
Easy, file down the drivers to match the pliers pivot then you are good to go. Leave the handle the way it is.Yup, done that on mine too. Works well but the tools don't really click as the bottom ones as the top handle stop is different in shape and config to the bottom which was made to click. So it's kind of quasy-click, it clicks but not really...if you get my grip :-)
I'm happy with it as is, it works as expected, it's the original and still the one with the highest tool load ;)
-
@Lynn LeFey said:
So... I've been playing with this mod and...I am pretty solidly convinced that modifying the drivers to fit into the 'front' where the plier heads was without removing the plier retention spring is better than removing the plier retention spring.
Certainly not FASTER, but better.
Losing all retention on the drivers really limits their usefulness, IMO.
Otherwise... I think this makes a handy little package. It's about the same size (minus protruding bolts and pocket clip) as the Vic Farmer, and packs in about as much useful function. I assume that the Sidekick's saw, with some major work, could be made into an inside folding tool. You might have to lose one of the file/can opener/ serrated blade slots to make it fit, though.
I was actually quite opposite...I tried it with the pliers retention spring and while it worked it caused much more friction than necessary. It really doesn't add anything to the functionality and operation of the top tools. If you remove the clip, use correct combo of washers and spacers (you need to play with this to find the best fit, it took me about 2 hours until I found the best fit, but then again I used scissors as well) and grind the base of the drivers so they quasy-click on opening and closing, you'll be good.

-
Kampfer, what did you have to do to get them all to click ?
I'm still thinking about picking one up to mess with.
Easy, file down the drivers to match the pliers pivot then you are good to go. Leave the handle the way it is.
How firm is the driver open retention at the wrong end with the slot filed down compared with the stock open retention at the correct end?
Hoping to get my Wingman tomorrow then I do my version.

-

If I'd read through all the posts I'd have seen my question has already been quasi-answered.
-
@pingu said:

If I'd read through all the posts I'd have seen my question has already been quasi-answered.
It depends how much you file down. On the one I did it is quite a bit firmer that the stock end. Also I cut in a deep backstop so they open a little past the straight line of the handle to reduce the chance of them closing up onto your hand.
-
Just adding a couple comments.
I think scissors make this tool awesome. I didn't have any spare and that was a downer. However, if you leave the plier spring in and rework the tools, I'm not sure there is enough there to do that with the scissors. It is possible that to have scissors you have to remove the plier spring. Or put them down the other end, someone else can try that.
The second is an issue of tension. I reworked the tools so they opened easily about a quarter open, then a little firmer to half open. This was to allow easy access to the tools below. What I failed to note before I did this was that the spring no longer held them shut. Because they share a fastener with the knife what happens is if you tighten it to keep the tools in the knife is hard to open, if you loosen it so the knife opens easily then the tools are loose. Learn from my mistake maybe.
Sadly my OCD prevents me from ever being able to enjoy these tools in both stock and hacked form. Mostly because of the handle shape. I liked the plier head, the flat and phillips drivers, the package opener etc. I can see why others might like them but they're not for me.
I can't believe some of you have made multiples now.
-
Never had you for an OCD type, mate...quite surprised, actually

-
Kampfer, what did you have to do to get them all to click ?
I'm still thinking about picking one up to mess with.
Easy, file down the drivers to match the pliers pivot then you are good to go. Leave the handle the way it is.
How firm is the driver open retention at the wrong end with the slot filed down compared with the stock open retention at the correct end?
Hoping to get my Wingman tomorrow then I do my version.

Same tension as the pliers head.

-
given that the drivers are likely to have a side load put on them and therefore need good retention but the things like the can opener will only ever be used force against the backstop, why not swap the ends round? Put the drivers where the tools normally go, and the other tools at the plier end.
Does anyone know how hard the file is compared to a "normal" Leatherman screwdriver? I'm thinking of attacking it to give it a usable, slender shank.
-
@zoidberg said:
What I failed to note before I did this was that the spring no longer held them shut.Well that reminds me of my first ever attempted hack - trying to make a Gerber Evo non-locking :ahhh. A complete fail but its not impossible the Gerber PE will make a reappearance in my Wi-man

Thanks for the great heads-up.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



